I discovered if I use dtoverlay=vc4-fkms-3d,noaudio instead of vc4-kms-3d,noaudio the bcm2835 hdmi audio works at 192khz....but no /dev/cec so cec-ctl fails. Below are the steps I followed..
piCorePlayer8.0.0 32-bit version * switch to Beta mode at the bottom of the Main page of the piCorePlayer 5 webgui. * resize filesystem to 500MB * switch squeezelite to HDMI audio * switch wifi OFF * Install Jivelite from the webgui Tweaks Tab->Jivelite Setup, reboot and configure jivelite (pcp-jivelite.tcz) * Set Jivelite rotation to ZERO * Install IR Remote Control for Jivelite from the Tweaks TAB | IR Page | Kernel Keytables | Install IR-tools for Jivelite (installs pcp-irtools.tcz) * Squeezelite settings, set audio to HDMI /usr/local/bin/squeezelite -n "TV" -o hw:CARD=b1,DEV=0 -a 80:4:16:0: -c pcm -r 192000 -v -W * Modify config.txt from ssh command line mount /mnt/mmcblk0p1 cd /mnt/mmcblk0p1 vi config.txt #gpu_mem=16 disable_overscan=1 framebuffer_width=1920 framebuffer_height=1080 hdmi_ignore_cec_init=1 dtoverlay=vc4-fkms-v3d,noaudio #hdmi_force_edid_audio=1 #audio_pwm_mode=2 * Install cec-ctl from Extensions | Available | v4l2-utils.tcz * Type the following in Tweaks | User Commands -> cec-ctl --playback ------------------------------------------------------------------------ audiofool's Profile: http://forums.slimdevices.com/member.php?userid=72140 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
