Howard Passman wrote: > I suspect not. Raspberry pi only certifies a few if not only one screen > officially. Plus pCP and Jivelite aren't your run of the mill software. > There is no routine to 'calibrate' the touch screen in piCorePlayer. > > Of course all of this is to the best of my knowledge which is limited. > You can always give the OSOYOO screens a try if you can find them. I've > got three of them and they all worked perfectly out of the box with the > exception of rotating them 180 degrees. A bit nicer package too. Black > edges. Nothing sticking out if you want to flush mount them. > > Howard
Hi Howard, or any other one that can help me... Then not finding a way to calbrate the screen, I bought a Waveshare 7 inch on amazon. To be sure that everything is reset, i redeploy a new pcore 8.0, edit the config.txt and add the lines that Waveshare tells to add, install javelite.. and nothing of the screen... I tried to set resolution for jivelite in the tweaks tab to 1024x600.. from there i can see the lofo when jivelite starts, but not centered.. then the frist config menu appears and it's like the left margin i almost on the right of the screen. I have tried resolution 0x0 1024x800 1024x600 800x600, either the screen displays nothing, or it is not centered.... I have also tried to rotate.. no change... Please help, because it it has to work OOTB, i have a big issue... yves ------------------------------------------------------------------------ ygi's Profile: http://forums.slimdevices.com/member.php?userid=38324 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix