Man in a van wrote: > at mile 19 :) > > I am playing with a pi zero 2W at the moment :rolleyes: > > Anyway, I plugged in a usb stick, I did NOT mount it, and ran dmesg > > This is the snip from towards the end > > > 2.572443] mmc0: host does not support reading read-only switch, > assuming write-enable > [ 2.576544] mmc0: new high speed SDHC card at address aaaa > [ 2.577312] mmcblk0: mmc0:aaaa SS16G 14.8 GiB > [ 2.579384] mmcblk0: p1 p2 > [ 2.602538] mmc1: new high speed SDIO card at address 0001 > [ 2.686432] usb 1-1: new high-speed USB device number 2 using dwc_otg > [ 2.686944] Indeed it is in host mode hprt0 = 00001101 > [ 2.927957] usb 1-1: New USB device found, idVendor=0951, > idProduct=1666, bcdDevice= 1.10 > [ 2.927981] usb 1-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 2.927998] usb 1-1: Product: DataTraveler 3.0 > [ 2.928008] usb 1-1: Manufacturer: Kingston > [ 2.928019] usb 1-1: SerialNumber: E0D55E62DBDEE410387605E4 > [ 2.928738] usb-storage 1-1:1.0: USB Mass Storage device detected > [ 2.947366] scsi host0: usb-storage 1-1:1.0 > [ 4.007270] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 > PMAP PQ: 0 ANSI: 6 > [ 4.008152] sd 0:0:0:0: [sda] 242196480 512-byte logical blocks: (124 > GB/115 GiB) > [ 4.008511] sd 0:0:0:0: [sda] Write Protect is off > [ 4.008524] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 > [ 4.008835] sd 0:0:0:0: [sda] Write cache: disabled, read cache: > enabled, doesn't support DPO or FUA > [ 4.202223] sda: sda1 > [ 4.204272] sd 0:0:0:0: [sda] Attached SCSI removable disk > [ 4.933893] zram: Added device: zram0 > [ 4.940933] zram0: detected capacity change from 0 to 114221056 > [ 4.946039] random: mkswap: uninitialized urandom read (16 bytes > read) > [ 5.01 > > what format is the sata thingy ? > > ronnie
Ronnie. I've pasted what could be relevant below in red, SSD is 240 GB. Means nothing to me. No idea what it's formatted as, link to this device in a post higher up, you tell me. :) 1.436998] scsi 0:0:0:0: Direct-Access Argon Forty 0 PQ: 0 ANSI: 6 [ 1.444931] random: fast init done [ 1.445293] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (*240 GB/224 GiB*) [ 1.445446] sd 0:0:0:0: [sda] Write Protect is off [ 1.445454] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 1.445663] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.446175] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes [ 1.461632] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.706774] usb 2-1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [ 1.728000] usb 2-1: New USB device found, idVendor=0781, idProduct=558c, bcdDevice=10.12 [ 1.728007] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.728012] usb 2-1: Product: Extreme SSD [ 1.728017] usb 2-1: Manufacturer: SanDisk [ 1.728022] usb 2-1: SerialNumber: 323033394B58343030323238 [ 1.737021] scsi host1: uas [ 1.738000] scsi 1:0:0:0: Direct-Access SanDisk Extreme SSD 1012 PQ: 0 ANSI: 6 [ 1.739169] sd 1:0:0:0: [sdb] Spinning up disk... [ 1.739872] scsi 1:0:0:1: Enclosure SanDisk SES Device 1012 PQ: 0 ANSI: 6 [ 2.750463] . [ 3.177981] zram: Added device: zram0 [ 3.235485] zram0: detected capacity change from 0 to 992645120 [ 3.237904] random: mkswap: uninitialized urandom read (16 bytes read) [ 3.258482] Adding 969376k swap on /dev/zram0. Priority:-2 extents:1 across:969376k SSFS [ 3.315052] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.619753] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 3.659959] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.714437] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.778468] .ready [ 3.779195] sd 1:0:0:0: [sdb] 1953523712 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.779203] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 3.779361] sd 1:0:0:0: [sdb] Write Protect is off [ 3.779368] sd 1:0:0:0: [sdb] Mode Sense: 67 00 10 08 [ 3.779619] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 3.780177] sd 1:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 3.820969] sdb: sdb1 [ 3.823102] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.823229] sd 1:0:0:0: [sdb] Attached SCSI disk [ 7.647602] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 7.663211] bcm2835_audio bcm2835_audio: card created with 8 channels [ 9.187370] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 9.187630] bcmgenet fd580000.ethernet eth0: Link is Down [ 9.260971] Starting piCorePlayer v8.0.0 startup. [ 9.309341] random: crng init done [ 9.570919] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 13.278650] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 30.349013] fuse: init (API version 7.32) [ 30.834391] FS-Cache: Netfs 'cifs' registered for caching [ 30.837144] Key type cifs.spnego registered [ 30.837160] Key type cifs.idmap registered [ 30.837899] CIFS: Attempting to mount //192.168.1.15/George [ 30.837938] CIFS: VFS: Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers [ 31.585718] Finished piCorePlayer v8.0.0 startup. tc@musicbox:~$ *Server - LMS 8.3.0 *Pi4B 4GB/Argon one case/pCP 8.0.0 - 75K library, playlists & LMS cache on SSD (ntfs) *Study -* Pi4/pCP 8.0.0/Topping E30 DAC/Ruark MR1 Mk2 *Lounge* - Pi2/pCP 8.0.0 > HiFiBerry DIGI+ > AudioEngine DAC1 > AVI DM5 *Dining Room* - Pi3B/pCP/Bluetooth/Echo Show 8 *Garage* - DAC32 > Edifier speakers *Spares* - 2xTouch, 1xSB Radio. 1xSB3, 6xRPi ------------------------------------------------------------------------ kidstypike's Profile: http://forums.slimdevices.com/member.php?userid=10436 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
