Hello all, I am trying to program XC9572 with ft2232 hubert Hoegl's cable. In Xilinx ISE I just prepared simple "ersae.svf" file. After I start urjtag, set the cable and detect scan chain, I use "svf erase.svf". But I get "could not establish SIR instruction".
What does it mean ? What is wrong with my jtag ? Please, see the log below. Thank you for help, Vaclav $ /opt/urjtag-0.10/bin/jtag UrJTAG 0.10 #1502 Copyright (C) 2002, 2003 ETC s.r.o. Copyright (C) 2007, 2008, 2009 Kolja Waschk and the respective authors UrJTAG is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. There is absolutely no warranty for UrJTAG. WARNING: UrJTAG may damage your hardware! Type "quit" to exit, "help" for help. jtag> cable ft2232 Connected to libftd2xx driver. jtag> detect IR length: 8 Chain length: 1 Device Id: 01011001011000000100000010010011 (0x0000000059604093) Manufacturer: Xilinx Part(0): XC9572XL_VQ44 Unknown stepping! chain.c(149) Part 0 without active instruction chain.c(200) Part 0 without active instruction chain.c(149) Part 0 without active instruction jtag> svf erase.svf Error svf: could not establish SIR instruction jtag> quit ------------------------------------------------------------------------------ SOLARIS 10 is the OS for Data Centers - provides features such as DTrace, Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW http://p.sf.net/sfu/solaris-dev2dev _______________________________________________ UrJTAG-development mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/urjtag-development
