On 7/15/10, Mike Frysinger <[email protected]> wrote: > On Thursday, July 15, 2010 02:48:54 Gregg Levine wrote: >> Robin's gizmo arrived yesterday. However trying to see if the program >> saw it on Linux causes errors. Such as I type in the name found on the >> listing of suggested cables, which as it happens does include its >> name. The program complains that it's not included in the library >> libusb and promptly dumps me back at the program prompt, > > i have no idea what you're trying to say. libusb knows nothing of urjtag > cables or anything else. > >> Does this mean that the library included with Slackware 12.1 isn't up >> to it? > > urjtag should work fine with libusb-0.x and libusb-1.x > >> However the program is the current SVN cut of 1809, which according to >> early discussions includes it. > > you also need to replace pronouns with actual information. you cant assume > that people know what offlist discussions you're referring to. > > i'm guessing you're actually talking about the ICE100B cable and you're > trying > to get current svn to work with it. the only thing it needs is libusb to > work. look at the configure output to verify, and check the output of > 'cable'. when in doubt, simply use the 'cable probe' shortcut to let urjtag > try and locate devices for you. > -mike >
Hello! Okay this is what this computer responded when I told the program debug all, and then cable probe: Found USB cable: ICE-100B tap_state: UNKNOWN_STATE do_host_cmd: unable to write from &usb_cmd_blk to usb: 2;wanted 12 bytes but only wrote 0 bytesdo_host_cmd: unable to write from &usb_cmd_blk to usb: 2;wanted 12 bytes but only wrote 0 bytesICE-100B Firmware Version is 0.0.1 do_single_reg_value: unable to write from &usb_cmd_blk to usb: 2;wanted 12 bytes but only wrote 0 bytescable/ice100.c:1111 ice_set_sig() Warning: Setting TRST is unavailable for Firmware Versions less than 1.0.6tap_state: UNKNOWN_STATE cable/ice100.c:1111 ice_set_sig() Warning: Setting TRST is unavailable for Firmware Versions less than 1.0.6tap_state: TEST_LOGIC_RESET tap_state: TEST_LOGIC_RESET do_rawscan: unable to write from &usb_cmd_blk to usb: 2;wanted 12 bytes but only wrote 0 bytestap_state: TEST_LOGIC_RESET =(tms:1)=> TEST_LOGIC_RESET tap_state: TEST_LOGIC_RESET =(tms:1)=> TEST_LOGIC_RESET tap_state: TEST_LOGIC_RESET =(tms:1)=> TEST_LOGIC_RESET tap_state: TEST_LOGIC_RESET =(tms:1)=> TEST_LOGIC_RESET tap_state: TEST_LOGIC_RESET =(tms:1)=> TEST_LOGIC_RESET do_rawscan: unable to write from &usb_cmd_blk to usb: 2;wanted 12 bytes but only wrote 0 bytestap_state: TEST_LOGIC_RESET =(tms:0)=> RUN_TEST_IDLE Return in urj_parse_line r=0 And I suspect the device will work after that, but I am not sure. ----- Gregg C Levine [email protected] "This signature fought the Time Wars, time and again." ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ UrJTAG-development mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/urjtag-development
