I'm thinking of using urjtag to load code, so I have a dirtyjtag board loaded with code via an ST-link, and now I can see the code loading worked -- lsusb shows InterBiometrics. I have a ftdi 2232H board coming soon.
After that, I'm stalled as I hit descriptions of using urjtag to program a flash saying not quite enough for a newb: 3.1.6. Burn flash connected to the part jtag> flashmem 0 brux.b 0x00000000 Note: Supported configuration is 2 x 16 bit only BOOT_SEL: Asynchronous 32-bit ROM So, what is 2 x 16 bit flash configuration, and how to find if STM32F401 uses it? Dual bank it is not... How to verify this: Asynchronous 32-bit ROM? maybe I could help write some docs? Meanwhile reading how to use DFU mode of STM32F401 to load code instead. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ UrJTAG-development mailing list UrJTAG-development@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/urjtag-development
