On Sat, Mar 24, 2018 at 03:43:23PM -0500, John Griessen wrote: > I'm thinking of using urjtag to load code, so I have a dirtyjtag board loaded > with code via an ST-link, > and now I can see the code loading worked -- lsusb shows InterBiometrics. I > have a ftdi 2232H board coming soon. > > After that, I'm stalled as I hit descriptions of using urjtag to program a > flash saying not quite enough for > a newb: > > 3.1.6. Burn flash connected to the part > > jtag> flashmem 0 brux.b > 0x00000000 > Note: Supported configuration is 2 x 16 bit only > BOOT_SEL: Asynchronous 32-bit ROM > > So, what is 2 x 16 bit flash configuration, and how to find if STM32F401 uses > it? Dual bank it is not... > > How to verify this: Asynchronous 32-bit ROM?
What did `scan` show?? > maybe I could help write some docs? Would be nice > Meanwhile reading how to use DFU mode of STM32F401 to load code instead. AFAIK is DeviceFirmwareUpload not a JTAG function. Groeten Geert Stappers -- Leven en laten leven ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ UrJTAG-development mailing list UrJTAG-development@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/urjtag-development
