Hi, *Please send Resume to **[email protected] <[email protected]>*
Overall work exp. we are looking at is 7 to 12 years in the area of mechanical Engineering / Value Engineering *Work Location* – San Jose , CA, USA *Detailed JD:* The candidate should demonstrate ability to design, plan and execute development of electronic system packaging. • Should understand sheet metal tooling and plastic injection mold process • Should demonstrate knowledge in GD&T, process capability (Cpk) and statistical tolerance analysis • Should be familiar with design for manufacturability (DFM) • Should be familiar with 19-in rack system standard and data center environment. • At least 10 years of experience in a CAD tool (over 2 years of using Pro/E Wildfire or CREO a must.) • Familiar with Allegro PCB CAD tool and IDF conversion between mCAD and eCAD. • Familiar with NEBS GR-63 and MIL-STD-810 or other environmental test standard and process. • Experience in using high speed backplane connectors *Skill Sets* *Quick JD* Technology: SolidWorks & Costing tools Domain: Manufacturing 1. Understanding of the Mechanical sub components in electronic/electrical devices 2. Investigate on alternates for a low cost solution. 3. Provide proposal with ROI and cost savings. 4. Mechanical Value engineering for product. 5. Exposure to the cisco process is a big plus. Best Regards Ankit kumar Sagwal IDC Technologies Inc. E-mail: [email protected] Phone: 408-457-9381 Ext. 4030 GTalk: ankit121.rgtalent Ymgr: ankit_sagwal -- You received this message because you are subscribed to the Google Groups "US_IT.Groups" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/us_itgroups. For more options, visit https://groups.google.com/d/optout.
