Hope this helps, David... /H Resolving audio problems with MC/RR under Linux RedHat 9
TROUBLESHOOTING AUDIO PROBLEMS Q: I can't hear any sound! A: You need to have xanim installed, otherwise, no sound is going to be played. Open a terminal, and type "xanim". If you receive a message like "command not found", you don't have xanim in your system. Please download a version of xanim appropiate for your distro. Q: I hear music, but no sound effects! or Q: I hear sound effects, but no music! A: I was afraid you reach this point, but, well... CircusTux requires you have a soundcard capable of playing different audio files simultaneously (like mine, a SoundBlaster Live! card). If you don't have such card, is still possible to hear music AND audio effects if you use a sound server, such as aRts or Enlightenment Sound Daemon (esd). If you want to use aRts on KDE, do the following: 1. Open Control Center, Sound & Multimedia, Sound System. 2. Select "start aRts soundserver on KDE startup". 3. Make sure that "enable full duplex operation" in the "Sound I/O" tab is unchecked, because it messes the operation of the program in some sound cards. 4. In a Konsole, go to the directory where CircusTux is located, and type "artsdsp ./circus" (Of course, you can also create a KDE Menu or Desktop Entry to ease access) If you use GNOME or Enlightenment with a sound card or driver not capable of handling simultaneous sounds, there are a few issues... The esd daemon likes to startup with the following parameters: esd -terminate -nobeeps -as 2 -spawnfd [some number] Unfortunately, CircusTux does not like the "-terminate" and "-as 2" parameters. So, if you have a GNOME desktop, you would need to do the following: 1. Deactivate "Enable sound server startup" in Sound Preferences, close and restart the session 2. Open a terminal, type "esd" (you can still use the "-nobeeps" and "-spawnfd [some number]" parameters if you like) 3. In a gnome terminal, go to the CircusTux directory, and type "esddsp ./ circus" (Of course, you can also create a GNOME Menu or Desktop Entry to ease access, or recompile your GNOME environment without the offending parameters ;P) If you have an Enlightenment desktop: 1. Right click on the desktop, Audio Setting, deselect "Enable Sounds" 2. Open a terminal, type "esd" (you can still use the "-nobeeps" and "-spawnfd [some number]" parameters if you like) 3. In a Enlightenment terminal, go to the CircusTux directory, and type "esddsp ./circus" (Of course, you can also create a Menu Entry to ease access, or recompile your Enlightenment environment without the offending parameters ;P) Q: I did all the above, but the sound is all choppy/incomplete/delayed/ randomly appearing! A: CircusTux requires a Pentium III equivalent or better to work properly. However, it is possible to run the program in older computers, with partial sound support, or even without sounds :( To run CircusTux without sound support, click the "Sound" button, and deselect "Ambient music" and "Sound Effects". You could also try only one sound option (music OR effects) to see if that fits in your configuration. If you use aRTs Sound Server and KDE, you can try to augment the audio response time by going to Control Center, Sounds & Multimedia, Sound System, Sound I/O. There you can experiment with some value in the Audio Buffer Size bar. VIDEO PROBLEMS Q: The images in CircusTux look awful! A: The program works better in 24 bpp. If you have your display in 16bpp is fine, too. However, less than that would cause the images to display very poorly. You can check which mode is working CircusTux by clicking on its "Info" button. If the section "Screen Depth" shows something less than 16bpp, you should upgrade the video mode to more colors... or replace your old video card :) OTHER PROBLEMS Q: Found a bug in CircusTux! A: Let us know! write us to [EMAIL PROTECTED] _______________________________________________ use-revolution mailing list [EMAIL PROTECTED] http://lists.runrev.com/mailman/listinfo/use-revolution
