Re: nurbs fillet

[Alasdair]

Hello Matthias yes some experimentation revealed that the mesh has to be UN-filled - I guess the manual should make that clear.  another point about the manual, it states to create a cone you should use the rotate tool which does nothing but rotate something -  what you need is under tools/nurbconstruction/create rotation surface the manual requires clarification :(   Alasdair erect featherless biped www.digitalmystic.co.uk     ----- Original Message ----- From: Matthias Kappenberg To: user-list@light.realsoft3d.com Sent: Tuesday, February 07, 2006 8:43 PM Subject: Re: nurbs fillet Hi Alasdair,   you must first create a trim-curve in a mesh. Then select the mesh you like to have a filled from and the trim curve inside the mesh (-level) where you want the filled to.   Select order: Filled from (<--Mesh) to (<--Trim Curve in Mesh)   When I try to create a filled from Mesh to Mesh, I get the same error. (The error is the same in 4.5 and 5.1)   Was it a filled, what you've tried to create?!? (No hint in your mail, but I can look in your brain, huhhhhhh ;-)   Matthias     ----- Original Message ----- From: Alasdair To: user-list@light.realsoft3d.com Sent: Tuesday, February 07, 2006 7:38 PM Subject: Re: nurbs fillet should have said - ver 5.1 sp2 erect featherless biped www.digitalmystic.co.uk     No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 267.15.2/252 - Release Date: 06.02.2006 No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 267.15.0/249 - Release Date: 02/02/2006

No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.15.0/249 - Release Date: 02/02/2006