Hi Jason,
Was there not some kind of conversion program? To convert V3 files to V4? It's so long ago I used it, I don't remember it anymore. Arjo. Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Jason Saunders Verzonden: zondag 28 september 2008 19:16 Aan: [email protected] Onderwerp: RE: Real3d project import ? Thanks Chuck, but I am trying to get the models and scenes into Realsoft v6, so opening in the old v3 program will just give me the old v3 output, which I cannot find a way to read in any version from v4 upwards L I got some files to load into Realsoft 4.1, but wondered if there is a better way ? I did find an old Real3d installed folder backed up on an old tape drive today, which allows me to open the old scenes, but I am stumped on the output from there. Even saving in rpl does not seem to work. Thanks again though. Regards Jason _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Charles Henry Sent: 25 September 2008 19:20 To: [email protected] Subject: RE: Real3d project import ? Hi Jason, I had the same problem and Vesa sent me this: Hello, You can find a stripped v3 installation from: www.nic.fi/~realsof1/real3dv3.zip Just unzip the install folder and click real.exe item to start the program. Best regards, Vesa But it doesn't work now .. Better check with Vesa . Or I can send you what I have if it is OK with Vesa. Cheers, Chuck Henry _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jason Saunders Sent: Thursday, September 25, 2008 10:15 AM To: [email protected] Subject: Real3d project import ? Afternoon Just wondering if anyone can remember what versions of Realsoft after Real3d, could actually load old Real3d project files ? I have Realsoft v4 and v4.1 installed, but cannot get most of my old Real3d files into it. If anyone can remember I would be grateful. Many thanks Jason
