Hi, Thanks for your responses on Friday, I unfortunately had to run out of the office, and couldn't respond over the weekend.
When I went to try your suggestions this morning, I found that, instead of starting up the mapr sandbox, I was getting an error screen. I've attached a screenshot. I wanted to attach the logs as well, but when I went to /opt, I did not find a mapr folder. (/opt is where the Mapr startup screens were saying the logs would be). Should I look somewhere else? Best, Jen -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Andries Engelbrecht Sent: Friday, January 23, 2015 5:54 PM To: [email protected] Subject: Re: Unable to root into Drill sandbox. Hi Jen, Try $ ssh root@localhost -p 2222 password will be mapr -Andries On Jan 23, 2015, at 2:34 PM, Young, Jennifer M. <[email protected]> wrote: > Hi Andries! > > Thanks so much for the response. > > Yes, I can use http://<IP_ADDRESS>:8047. > > I am using VirtualBox, and the sandbox version I am using is 4.0.1 > > I am using the NAT adapter. > > I'll read that blog post for more clues, but I really appreciate your help > and insight. > > Thank you again, > Jen > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On > Behalf Of Andries Engelbrecht > Sent: Friday, January 23, 2015 5:15 PM > To: [email protected] > Subject: Re: Unable to root into Drill sandbox. > > Hi Jen, > > Can you access the drillbit when you use a browser and connect to > http://<IP_ADDRESS>:8047? > > Are you sing Virtualbox or VMware for the SandBox VM? > > Also did you use NAT or bridge adapter for the network setting with the > Sandbox? > > BTW: Which sandbox version are you using? > > Also see this blog post for more info on the Sandbox networking and > configuration, may provide some background. > https://www.mapr.com/blog/how-configure-network-mapr-sandbox-hadoop-whiteboardwalkthrough#.VMLHuGTF-nA > > -Andries > > > On Jan 23, 2015, at 1:59 PM, Young, Jennifer M. <[email protected]> > wrote: > >> Hi, >> >> I can't seem to log into the Drill sandbox as root (and so I can't start >> sqlline). >> >> I have made sure to check my hosts file, and added the DNS entry. I have >> tried two different ways to log in. >> >> >> 1. $ ssh [email protected]<mailto:[email protected]> -p 2222 >> >> 2. And just $ ssh [email protected]<mailto:[email protected]> >> >> These are the commands detailed here: >> http://doc.mapr.com/display/MapR/Getting+to+Know+the+Drill+Setup >> >> In each case, I get told that the connection timed out. >> >> I'd really appreciate some help figuring this out. I am betting it is >> something simple, but I am a relatively new user to both Linux, command >> lines, and Hadoop, so I'm struggling. >> >> Thanks, >> Jen >
