My first thought based on this discussion was that it would require moving some methods (setAutoFlush() and setWriteBufferSize()) from Table to Connection. That would be a breaking API change.
-Solomon On Fri, Dec 19, 2014 at 3:04 PM, Andrew Purtell <[email protected]> wrote: > > I think it would be critical if we're contemplating something that requires > a breaking API change? Do we have that here? I'm not sure. > > On Fri, Dec 19, 2014 at 12:02 PM, Solomon Duskis <[email protected]> > wrote: > > > > Is this critical to sort out before 1.0, or is fixing this a post-1.0 > > enhancement? > > > > -Solomon > > > > On Fri, Dec 19, 2014 at 2:19 PM, Andrew Purtell <[email protected]> > > wrote: > > > > > > I don't like the dropped writes either. Just pointing out what we have > > now. > > > There is a gap no doubt. > > > > > > On Fri, Dec 19, 2014 at 11:16 AM, Nick Dimiduk <[email protected]> > > > wrote: > > > > > > > > Thanks for the reminder about the Multiplexer, Andrew. It sort-of > > solves > > > > this problem, but think it's semantics of dropping writes are not > > > desirable > > > > in the general case. Further, my understanding was that the new > > > connection > > > > implementation is designed to handle this kind of use-case (hence > > cc'ing > > > > Lars). > > > > > > > > On Fri, Dec 19, 2014 at 11:02 AM, Andrew Purtell < > [email protected]> > > > > wrote: > > > > > > > > > > Aaron: Please post a copy of that feedback on the JIRA, pretty sure > > we > > > > will > > > > > be having an improvement discussion there. > > > > > > > > > > On Fri, Dec 19, 2014 at 10:58 AM, Aaron Beppu < > > [email protected]> > > > > > wrote: > > > > > > > > > > > > Nick : Thanks, I've created an issue [1]. > > > > > > > > > > > > Pradeep : Yes, I have considered using that. However for the > > moment, > > > > > we've > > > > > > set it out of scope, since our migration from 0.94 -> 0.98 is > > > already a > > > > > bit > > > > > > complicated, and we hoped to separate isolate these changes by > not > > > > moving > > > > > > to the async client until after the current migration is > complete. > > > > > > > > > > > > Andrew : HTableMultiplexer does seem like it would solve our > > buffered > > > > > write > > > > > > problem, albeit in an awkward way -- thanks! It kind of seems > like > > > > HTable > > > > > > should then (if autoFlush == false) send writes to the > multiplexer, > > > > > rather > > > > > > than setting it in its own, short-lived writeBuffer. If nothing > > else, > > > > > it's > > > > > > still super confusing that HTableInterface exposes setAutoFlush() > > and > > > > > > setWriteBufferSize(), given that the writeBuffer won't > meaningfully > > > > > buffer > > > > > > anything if all tables are short-lived. > > > > > > > > > > > > [1] https://issues.apache.org/jira/browse/HBASE-12728 > > > > > > > > > > > > On Fri, Dec 19, 2014 at 10:31 AM, Andrew Purtell < > > > [email protected]> > > > > > > wrote: > > > > > > > > > > > > > > I believe HTableMultiplexer[1] is meant to stand in for > > HTablePool > > > > for > > > > > > > buffered writing. FWIW, I've not used it. > > > > > > > > > > > > > > 1: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://hbase.apache.org/apidocs/org/apache/hadoop/hbase/client/HTableMultiplexer.html > > > > > > > > > > > > > > > > > > > > > On Fri, Dec 19, 2014 at 9:00 AM, Nick Dimiduk < > > [email protected] > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > Hi Aaron, > > > > > > > > > > > > > > > > Your analysis is spot on and I do not believe this is by > > design. > > > I > > > > > see > > > > > > > the > > > > > > > > write buffer is owned by the table, while I would have > expected > > > > there > > > > > > to > > > > > > > be > > > > > > > > a buffer per table all managed by the connection. I suggest > you > > > > > raise a > > > > > > > > blocker ticket vs the 1.0.0 release that's just around the > > corner > > > > to > > > > > > give > > > > > > > > this the attention it needs. Let me know if you're not into > > > JIRA, I > > > > > can > > > > > > > > raise one on your behalf. > > > > > > > > > > > > > > > > cc Lars, Enis. > > > > > > > > > > > > > > > > Nice work Aaron. > > > > > > > > -n > > > > > > > > > > > > > > > > On Wed, Dec 17, 2014 at 6:44 PM, Aaron Beppu < > > > > [email protected] > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > Hi All, > > > > > > > > > > > > > > > > > > TLDR; in the absence of HTablePool, if HTable instances are > > > > > > > short-lived, > > > > > > > > > how should clients use buffered writes? > > > > > > > > > > > > > > > > > > I’m working on migrating a codebase from using 0.94.6 > > (CDH4.4) > > > to > > > > > > > 0.98.6 > > > > > > > > > (CDH5.2). One issue I’m confused by is how to effectively > use > > > > > > buffered > > > > > > > > > writes now that HTablePool has been deprecated[1]. > > > > > > > > > > > > > > > > > > In our 0.94 code, a pathway could get a table from the > pool, > > > > > > configure > > > > > > > it > > > > > > > > > with table.setAutoFlush(false); and write Puts to it. Those > > > > writes > > > > > > > would > > > > > > > > > then go to the table instance’s writeBuffer, and those > writes > > > > would > > > > > > > only > > > > > > > > be > > > > > > > > > flushed when the buffer was full, or when we were ready to > > > close > > > > > out > > > > > > > the > > > > > > > > > pool. We were intentionally choosing to have fewer, larger > > > writes > > > > > > from > > > > > > > > the > > > > > > > > > client to the cluster, and we knew we were giving up a > degree > > > of > > > > > > safety > > > > > > > > in > > > > > > > > > exchange (i.e. if the client dies after it’s accepted a > write > > > but > > > > > > > before > > > > > > > > > the flush for that write occurs, the data is lost). This > > seems > > > to > > > > > be > > > > > > a > > > > > > > > > generally considered a reasonable choice (cf the HBase Book > > [2] > > > > SS > > > > > > > > 14.8.4) > > > > > > > > > > > > > > > > > > However in the 0.98 world, without HTablePool, the endorsed > > > > pattern > > > > > > [3] > > > > > > > > > seems to be to create a new HTable via table = > > > > > > > > > stashedHConnection.getTable(tableName, myExecutorService). > > > > However, > > > > > > > even > > > > > > > > if > > > > > > > > > we do table.setAutoFlush(false), because that table > instance > > is > > > > > > > > > short-lived, its buffer never gets full. We’ll create a > table > > > > > > instance, > > > > > > > > > write a put to it, try to close the table, and the close > call > > > > will > > > > > > > > trigger > > > > > > > > > a (synchronous) flush. Thus, not having HTablePool seems > like > > > it > > > > > > would > > > > > > > > > cause us to have many more small writes from the client to > > the > > > > > > cluster, > > > > > > > > and > > > > > > > > > basically wipe out the advantage of turning off autoflush. > > > > > > > > > > > > > > > > > > More concretely : > > > > > > > > > > > > > > > > > > // Given these two helpers ... > > > > > > > > > > > > > > > > > > private HTableInterface getAutoFlushTable(String tableName) > > > > throws > > > > > > > > > IOException { > > > > > > > > > // (autoflush is true by default) > > > > > > > > > return storedConnection.getTable(tableName, > > executorService); > > > > > > > > > } > > > > > > > > > > > > > > > > > > private HTableInterface getBufferedTable(String tableName) > > > throws > > > > > > > > > IOException { > > > > > > > > > HTableInterface table = getAutoFlushTable(tableName); > > > > > > > > > table.setAutoFlush(false); > > > > > > > > > return table; > > > > > > > > > } > > > > > > > > > > > > > > > > > > // it's my contention that these two methods would behave > > > almost > > > > > > > > > identically, > > > > > > > > > // except the first will hit a synchronous flush during the > > put > > > > > call, > > > > > > > > > and the second will > > > > > > > > > // flush during the (hidden) close call on table. > > > > > > > > > > > > > > > > > > private void writeAutoFlushed(Put somePut) throws > > IOException { > > > > > > > > > try (HTableInterface table = > getAutoFlushTable(tableName)) > > { > > > > > > > > > table.put(somePut); // will do synchronous flush > > > > > > > > > } > > > > > > > > > } > > > > > > > > > > > > > > > > > > private void writeBuffered(Put somePut) throws IOException > { > > > > > > > > > try (HTableInterface table = > getBufferedTable(tableName)) { > > > > > > > > > table.put(somePut); > > > > > > > > > } // auto-close will trigger synchronous flush > > > > > > > > > } > > > > > > > > > > > > > > > > > > It seems like the only way to avoid this is to have > > long-lived > > > > > HTable > > > > > > > > > instances, which get reused for multiple writes. However, > > since > > > > the > > > > > > > > actual > > > > > > > > > writes are driven from highly concurrent code, and since > > HTable > > > > is > > > > > > not > > > > > > > > > threadsafe, this would involve having a number of HTable > > > > instances, > > > > > > > and a > > > > > > > > > control mechanism for leasing them out to individual > threads > > > > > safely. > > > > > > > > Except > > > > > > > > > at this point it seems like we will have recreated > > HTablePool, > > > > > which > > > > > > > > > suggests that we’re doing something deeply wrong. > > > > > > > > > > > > > > > > > > What am I missing here? Since the > > HTableInterface.setAutoFlush > > > > > method > > > > > > > > still > > > > > > > > > exists, it must be anticipated that users will still want > to > > > > buffer > > > > > > > > writes. > > > > > > > > > What’s the recommended way to actually buffer a meaningful > > > number > > > > > of > > > > > > > > > writes, from a multithreaded context, that doesn’t just > > amount > > > to > > > > > > > > creating > > > > > > > > > a table pool? > > > > > > > > > > > > > > > > > > Thanks in advance, > > > > > > > > > Aaron > > > > > > > > > > > > > > > > > > [1] https://issues.apache.org/jira/browse/HBASE-6580 > > > > > > > > > [2] http://hbase.apache.org/book/perf.writing.html > > > > > > > > > [3] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://issues.apache.org/jira/browse/HBASE-6580?focusedCommentId=13501302&page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel#comment-13501302 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > Best regards, > > > > > > > > > > > > > > - Andy > > > > > > > > > > > > > > Problems worthy of attack prove their worth by hitting back. - > > Piet > > > > > Hein > > > > > > > (via Tom White) > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > Best regards, > > > > > > > > > > - Andy > > > > > > > > > > Problems worthy of attack prove their worth by hitting back. - Piet > > > Hein > > > > > (via Tom White) > > > > > > > > > > > > > > > > > > -- > > > Best regards, > > > > > > - Andy > > > > > > Problems worthy of attack prove their worth by hitting back. - Piet > Hein > > > (via Tom White) > > > > > > > > -- > Best regards, > > - Andy > > Problems worthy of attack prove their worth by hitting back. - Piet Hein > (via Tom White) >
