> Hmm, that is a strange one, it should work.
>
> use php_info() to determine _where_ your server is actually looking
> for the php.ini file.
phpinfo() does say
Configuration File (php.ini) Path /etc/php.ini
which is indeed the file I've edited (tested with phpinfo() in a plain php
file on the server, and with "<?php phpinfo(); ?>" as the content of a test
page (just "<? phpinfo(); ?>" didn't work...).
I'm copy-pasting the httpd.conf file here, I don't know whether that can
give a clue.
The httpd.conf is the one produced by the Anders' rpm, with the content of
midgard-data.conf added.
There were some points where I had to edit it, however: some of the
"IfDefine" statements did not seem to work:
I had to change
<IfDefine HAVE_PHP4>
LoadModule php4_module modules/libphp4.so
</IfDefine>
into simply
LoadModule php4_module modules/libphp4.so (and analogously for
AddModule mod_php4.c)
because otherwise the server did not seem to load the module and did not
recognise the statement php_value further on in the configuration file
(php_value magic_quotes_gpc off).
And strangely enough, the rpm on my machine had put both
LoadModule midgard_module modules/mod_midgard.so
and
AddModule mod_midgard.c
between
<IfDefine HAVE_PYTHON> .... </IfDefine>which I had to take it out from
because python is not installed on my machine. The last attempt to make it
right was adding php_value short_open_tag on
php_value register_globals on
in the definition of the Midgard Virtual Host, but that doesn't seem to have
any effect either...Thx for your feedback...pascal
## Based upon the NCSA server configuration files originally by Rob
McCool.## This is the main Apache server configuration file. It contains
the# configuration directives that give the server its instructions.# See
<URL:http://www.apache.org/docs/> for detailed information about# the
directives.## Do NOT simply read the instructions in here without
understanding# what they do. They're here only as hints or reminders. If
you are unsure# consult the online docs. You have been warned. ## After
this file is processed, the server will look for and process#
/etc/httpd/conf/srm.conf and then /etc/httpd/conf/access.conf# unless you
have overridden these with ResourceConfig and/or# AccessConfig directives
here.## The configuration directives are grouped into three basic sections:#
1. Directives that control the operation of the Apache server process as a#
whole (the 'global environment').# 2. Directives that define the parameters
of the 'main' or 'default' server,# which responds to requests that
aren't handled by a virtual host.# These directives also provide default
values for the settings# of all virtual hosts.# 3. Settings for virtual
hosts, which allow Web requests to be sent to# different IP addresses or
hostnames and have them handled by the# same Apache server process.##
Configuration and logfile names: If the filenames you specify for many# of
the server's control files begin with "/" (or "drive:/" for Win32), the#
server will use that explicit path. If the filenames do *not* begin# with
"/", the value of ServerRoot is prepended -- so "logs/foo.log"# with
ServerRoot set to "/usr/local/apache" will be interpreted by the# server as
"/usr/local/apache/logs/foo.log".#### Section 1: Global Environment## The
directives in this section affect the overall operation of Apache,# such as
the number of concurrent requests it can handle or where it# can find its
configuration files.### ServerType is either inetd, or standalone. Inetd
mode is only supported on# Unix platforms.#ServerType standalone##
ServerRoot: The top of the directory tree under which the server's#
configuration, error, and log files are kept.## NOTE! If you intend to
place this on an NFS (or otherwise network)# mounted filesystem then please
read the LockFile documentation# (available at
<URL:http://www.apache.org/docs/mod/core.html#lockfile>);# you will save
yourself a lot of trouble.## Do NOT add a slash at the end of the directory
path.#ServerRoot "/etc/httpd"## The LockFile directive sets the path to the
lockfile used when Apache# is compiled with either
USE_FCNTL_SERIALIZED_ACCEPT or# USE_FLOCK_SERIALIZED_ACCEPT. This directive
should normally be left at# its default value. The main reason for changing
it is if the logs# directory is NFS mounted, since the lockfile MUST BE
STORED ON A LOCAL# DISK. The PID of the main server process is automatically
appended to# the filename. #LockFile /var/run/httpd.lock## PidFile: The file
in which the server should record its process# identification number when it
starts.#PidFile /var/run/httpd.pid## ScoreBoardFile: File used to store
internal server process information.# Not all architectures require this.
But if yours does (you'll know because# this file will be created when you
run Apache) then you *must* ensure that# no two invocations of Apache share
the same scoreboard file.#ScoreBoardFile logs/apache_runtime_status## In the
standard configuration, the server will process httpd.conf (this # file,
specified by the -f command line option), srm.conf, and access.conf # in
that order. The latter two files are now distributed empty, as it is #
recommended that all directives be kept in a single file for simplicity. #
The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or#
"nul" (for Win32) for the arguments to the directives.##ResourceConfig
conf/srm.conf#AccessConfig conf/access.conf## Timeout: The number of seconds
before receives and sends time out.#Timeout 300## KeepAlive: Whether or not
to allow persistent connections (more than# one request per connection). Set
to "Off" to deactivate.#KeepAlive Off## MaxKeepAliveRequests: The maximum
number of requests to allow# during a persistent connection. Set to 0 to
allow an unlimited amount.# We recommend you leave this number high, for
maximum performance.#MaxKeepAliveRequests 100## KeepAliveTimeout: Number of
seconds to wait for the next request from the# same client on the same
connection.#KeepAliveTimeout 15## Server-pool size regulation. Rather than
making you guess how many# server processes you need, Apache dynamically
adapts to the load it# sees --- that is, it tries to maintain enough server
processes to# handle the current load, plus a few spare servers to handle
transient# load spikes (e.g., multiple simultaneous requests from a single#
Netscape browser).## It does this by periodically checking how many servers
are waiting# for a request. If there are fewer than MinSpareServers, it
creates# a new spare. If there are more than MaxSpareServers, some of the#
spares die off. The default values are probably OK for most
sites.#MinSpareServers 5MaxSpareServers 20## Number of servers to start
initially --- should be a reasonable ballpark# figure.#StartServers 8##
Limit on total number of servers running, i.e., limit on the number# of
clients who can simultaneously connect --- if this limit is ever# reached,
clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.# It is intended
mainly as a brake to keep a runaway server from taking# the system with it
as it spirals down...#MaxClients 150## MaxRequestsPerChild: the number of
requests each child process is# allowed to process before the child dies.
The child will exit so# as to avoid problems after prolonged use when Apache
(and maybe the# libraries it uses) leak memory or other resources. On most
systems, this# isn't really needed, but a few (such as Solaris) do have
notable leaks# in the libraries. For these platforms, set to something like
10000# or so; a setting of 0 means unlimited.## NOTE: This value does not
include keepalive requests after the initial# request per connection.
For example, if a child process handles# an initial request and 10
subsequent "keptalive" requests, it# would only count as 1 request
towards this limit.#MaxRequestsPerChild 1000## Listen: Allows you to bind
Apache to specific IP addresses and/or# ports, in addition to the default.
See also the <VirtualHost># directive.##Listen 3000#Listen
12.34.56.78:80#Listen 80## BindAddress: You can support virtual hosts with
this option. This directive# is used to tell the server which IP address to
listen to. It can either# contain "*", an IP address, or a fully qualified
Internet domain name.# See also the <VirtualHost> and Listen
directives.##BindAddress *## Dynamic Shared Object (DSO) Support## To be
able to use the functionality of a module which was built as a DSO you# have
to place corresponding `LoadModule' lines at this location so the#
directives contained in it are actually available _before_ they are used.#
Please read the file http://httpd.apache.org/docs/dso.html for more# details
about the DSO mechanism and run `httpd -l' for the list of already# built-in
(statically linked and thus always available) modules in your httpd#
binary.## Note: The order in which modules are loaded is important. Don't
change# the order below without expert advice.## Example:# LoadModule
foo_module modules/mod_foo.so#LoadModule mmap_static_module
modules/mod_mmap_static.soLoadModule vhost_alias_module
modules/mod_vhost_alias.so<IfDefine HAVE_BANDWIDTH>LoadModule
bandwidth_module modules/mod_bandwidth.so</IfDefine><IfDefine
HAVE_THROTTLE>LoadModule throttle_module
modules/mod_throttle.so</IfDefine>LoadModule env_module
modules/mod_env.soLoadModule config_log_module
modules/mod_log_config.soLoadModule agent_log_module
modules/mod_log_agent.soLoadModule referer_log_module
modules/mod_log_referer.so#LoadModule mime_magic_module
modules/mod_mime_magic.soLoadModule mime_module
modules/mod_mime.soLoadModule negotiation_module
modules/mod_negotiation.soLoadModule status_module
modules/mod_status.soLoadModule info_module
modules/mod_info.soLoadModule includes_module
modules/mod_include.soLoadModule autoindex_module
modules/mod_autoindex.soLoadModule dir_module
modules/mod_dir.soLoadModule cgi_module modules/mod_cgi.soLoadModule
asis_module modules/mod_asis.soLoadModule imap_module
modules/mod_imap.soLoadModule action_module
modules/mod_actions.so#LoadModule speling_module
modules/mod_speling.soLoadModule userdir_module
modules/mod_userdir.soLoadModule alias_module
modules/mod_alias.soLoadModule rewrite_module
modules/mod_rewrite.soLoadModule access_module
modules/mod_access.soLoadModule auth_module
modules/mod_auth.soLoadModule anon_auth_module
modules/mod_auth_anon.soLoadModule db_auth_module
modules/mod_auth_db.so#LoadModule auth_any_module
modules/mod_auth_any.so#LoadModule dbm_auth_module
modules/mod_auth_dbm.so#LoadModule auth_ldap_module
modules/mod_auth_ldap.so#LoadModule mysql_auth_module
modules/mod_auth_mysql.so#LoadModule auth_pgsql_module
modules/mod_auth_pgsql.so#LoadModule digest_module
modules/mod_digest.so#LoadModule proxy_module
modules/libproxy.so#LoadModule cern_meta_module
modules/mod_cern_meta.soLoadModule expires_module
modules/mod_expires.soLoadModule headers_module
modules/mod_headers.so#LoadModule usertrack_module
modules/mod_usertrack.so#LoadModule example_module
modules/mod_example.so#LoadModule unique_id_module
modules/mod_unique_id.soLoadModule setenvif_module
modules/mod_setenvif.so<IfDefine HAVE_PERL>LoadModule perl_module
modules/libperl.so</IfDefine><IfDefine HAVE_PHP>LoadModule php_module
modules/mod_php.so</IfDefine><IfDefine HAVE_PHP3>LoadModule php3_module
modules/libphp3.so</IfDefine><IfDefine HAVE_PHP4></IfDefine>LoadModule
php4_module modules/libphp4.so<IfDefine HAVE_DAV>LoadModule
dav_module modules/libdav.so</IfDefine><IfDefine
HAVE_ROAMING>LoadModule roaming_module
modules/mod_roaming.so</IfDefine><IfDefine HAVE_SSL>LoadModule ssl_module
modules/libssl.so</IfDefine><IfDefine HAVE_PUT>LoadModule put_module
modules/mod_put.so</IfDefine><IfDefine HAVE_PYTHON>LoadModule python_module
modules/mod_python.so</IfDefine>LoadModule midgard_module
modules/mod_midgard.so# Reconstruction of the complete module list from all
available modules# (static and shared ones) to achieve correct module
execution order.# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE
THIS, TOO]ClearModuleList#AddModule mod_mmap_static.cAddModule
mod_vhost_alias.c<IfDefine HAVE_BANDWIDTH>AddModule
mod_bandwidth.c</IfDefine><IfDefine HAVE_THROTTLE>AddModule
mod_throttle.c</IfDefine>AddModule mod_env.cAddModule
mod_log_config.cAddModule mod_log_agent.cAddModule
mod_log_referer.c#AddModule mod_mime_magic.cAddModule mod_mime.cAddModule
mod_negotiation.cAddModule mod_status.cAddModule mod_info.cAddModule
mod_include.cAddModule mod_autoindex.cAddModule mod_dir.cAddModule
mod_cgi.cAddModule mod_asis.cAddModule mod_imap.cAddModule
mod_actions.c#AddModule mod_speling.cAddModule mod_userdir.cAddModule
mod_alias.cAddModule mod_rewrite.cAddModule mod_access.cAddModule
mod_auth.cAddModule mod_auth_anon.cAddModule mod_auth_db.c#AddModule
mod_auth_any.c#AddModule mod_auth_dbm.c#AddModule auth_ldap.c#AddModule
mod_auth_mysql.c#AddModule mod_auth_pgsql.c#AddModule mod_digest.c#AddModule
mod_proxy.c#AddModule mod_cern_meta.cAddModule mod_expires.cAddModule
mod_headers.c#AddModule mod_usertrack.c#AddModule mod_example.c#AddModule
mod_unique_id.cAddModule mod_so.cAddModule mod_setenvif.c<IfDefine
HAVE_PERL>AddModule mod_perl.c</IfDefine><IfDefine HAVE_PHP>AddModule
mod_php.c</IfDefine><IfDefine HAVE_PHP3>AddModule
mod_php3.c</IfDefine><IfDefine HAVE_PHP4></IfDefine>AddModule
mod_php4.c<IfDefine HAVE_DAV>AddModule mod_dav.c</IfDefine><IfDefine
HAVE_ROAMING>AddModule mod_roaming.c</IfDefine><IfDefine HAVE_SSL>AddModule
mod_ssl.c</IfDefine><IfDefine HAVE_PUT>AddModule
mod_put.c</IfDefine><IfDefine HAVE_PYTHON>AddModule
mod_python.c</IfDefine>AddModule mod_midgard.c## ExtendedStatus controls
whether Apache will generate "full" status# information (ExtendedStatus On)
or just basic information (ExtendedStatus# Off) when the "server-status"
handler is called. The default is Off.##ExtendedStatus On### Section 2:
'Main' server configuration## The directives in this section set up the
values used by the 'main'# server, which responds to any requests that
aren't handled by a# <VirtualHost> definition. These values also provide
defaults for# any <VirtualHost> containers you may define later in the
file.## All of these directives may appear inside <VirtualHost> containers,#
in which case these default settings will be overridden for the# virtual
host being defined.### If your ServerType directive (set earlier in the
'Global Environment'# section) is set to "inetd", the next few directives
don't have any# effect since their settings are defined by the inetd
configuration.# Skip ahead to the ServerAdmin directive.### Port: The port
to which the standalone server listens. For# ports < 1023, you will need
httpd to be run as root initially.#Port 80#### SSL Support#### When we
also provide SSL we have to listen to the ## standard HTTP port (see above)
and to the HTTPS port##<IfDefine HAVE_SSL>Listen 80Listen 443</IfDefine>##
If you wish httpd to run as a different user or group, you must run# httpd
as root initially and it will switch. ## User/Group: The name (or #number)
of the user/group to run httpd as.# . On SCO (ODT 3) use "User nouser" and
"Group nogroup".# . On HPUX you may not be able to use shared memory as
nobody, and the# suggested workaround is to create a user www and use
that user.# NOTE that some kernels refuse to setgid(Group) or
semctl(IPC_SET)# when the value of (unsigned)Group is above 60000; # don't
use Group "#-1" on these systems!#User apacheGroup apache## ServerAdmin:
Your address, where problems with the server should be# e-mailed. This
address appears on some server-generated pages, such# as error
documents.#ServerAdmin root@localhost## ServerName allows you to set a host
name which is sent back to clients for# your server if it's different than
the one the program would get (i.e., use# "www" instead of the host's real
name).## Note: You cannot just invent host names and hope they work. The
name you # define here must be a valid DNS name for your host. If you don't
understand# this, ask your network administrator.# If your host doesn't have
a registered DNS name, enter its IP address here.# You will have to access
it by its address (e.g., http://123.45.67.89/)# anyway, and this will make
redirections work in a sensible way.## 127.0.0.1 is the TCP/IP local
loop-back address, often named localhost. Your # machine always knows itself
by this address. If you use Apache strictly for # local testing and
development, you may use 127.0.0.1 as the server name.##ServerName
localhost## DocumentRoot: The directory out of which you will serve your#
documents. By default, all requests are taken from this directory, but#
symbolic links and aliases may be used to point to other
locations.#DocumentRoot "/var/www/html"## Each directory to which Apache has
access, can be configured with respect# to which services and features are
allowed and/or disabled in that# directory (and its subdirectories). ##
First, we configure the "default" to be a very restrictive set of #
permissions. #<Directory /> Options FollowSymLinks AllowOverride
None</Directory>## Note that from this point forward you must specifically
allow# particular features to be enabled - so if something's not working as#
you might expect, make sure that you have specifically enabled it# below.###
This should be changed to whatever you set DocumentRoot to.#<Directory
"/var/www/html">## This may also be "None", "All", or any combination of
"Indexes",# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".## Note
that "MultiViews" must be named *explicitly* --- "Options All"# doesn't give
it to you.# Options Indexes FollowSymLinks## This controls which options
the .htaccess files in directories can# override. Can also be "All", or any
combination of "Options", "FileInfo", # "AuthConfig", and "Limit"#
AllowOverride None## Controls who can get stuff from this server.# Order
allow,deny Allow from all</Directory>## UserDir: The name of the
directory which is appended onto a user's home# directory if a ~user request
is received.## The path to the end user account 'public_html' directory must
be# accessible to the webserver userid. This usually means that ~userid#
must have permissions of 711, ~userid/public_html must have permissions# of
755, and documents contained therein must be world-readable.# Otherwise, the
client will only receive a "403 Forbidden" message.## See also:
http://httpd.apache.org/docs/misc/FAQ.html#forbidden##<IfModule
mod_userdir.c># UserDir public_html#</IfModule>## Control access to
UserDir directories. The following is an example# for a site where these
directories are restricted to read-only.##<Directory /home/*/public_html>#
AllowOverride FileInfo AuthConfig Limit# Options MultiViews Indexes
SymLinksIfOwnerMatch IncludesNoExec# <Limit GET POST OPTIONS PROPFIND>#
Order allow,deny# Allow from all# </Limit># <LimitExcept GET
POST OPTIONS PROPFIND># Order deny,allow# Deny from all#
</LimitExcept>#</Directory>## DirectoryIndex: Name of the file or files to
use as a pre-written HTML# directory index. Separate multiple entries with
spaces.#<IfModule mod_dir.c> DirectoryIndex index.html index.htm
index.shtml index.php index.php4 index.php3 index.phtml
index.cgi</IfModule>## AccessFileName: The name of the file to look for in
each directory# for access control information.#AccessFileName .htaccess##
The following lines prevent .htaccess files from being viewed by# Web
clients. Since .htaccess files often contain authorization# information,
access is disallowed for security reasons. Comment# these lines out if you
want Web visitors to see the contents of# .htaccess files. If you change
the AccessFileName directive above,# be sure to make the corresponding
changes here.## Also, folks tend to use names such as .htpasswd for
password# files, so this will protect those as well.#<Files ~ "^\.ht">
Order allow,deny Deny from all Satisfy All</Files>##
CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each#
document that was negotiated on the basis of content. This asks proxy#
servers not to cache the document. Uncommenting the following line disables#
this behavior, and proxies will be allowed to cache the
documents.##CacheNegotiatedDocs## UseCanonicalName: (new for 1.3) With
this setting turned on, whenever# Apache needs to construct a
self-referencing URL (a URL that refers back# to the server the response is
coming from) it will use ServerName and# Port to form a "canonical" name.
With this setting off, Apache will# use the hostname:port that the client
supplied, when possible. This# also affects SERVER_NAME and SERVER_PORT in
CGI scripts.#UseCanonicalName On## TypesConfig describes where the
mime.types file (or equivalent) is# to be found.#<IfModule mod_mime.c>
TypesConfig /etc/mime.types</IfModule>## DefaultType is the default MIME
type the server will use for a document# if it cannot otherwise determine
one, such as from filename extensions.# If your server contains mostly text
or HTML documents, "text/plain" is# a good value. If most of your content
is binary, such as applications# or images, you may want to use
"application/octet-stream" instead to# keep browsers from trying to display
binary files as though they are# text.#DefaultType text/plain## The
mod_mime_magic module allows the server to use various hints from the#
contents of the file itself to determine its type. The MIMEMagicFile#
directive tells the module where the hint definitions are located.#
mod_mime_magic is not part of the default server (you have to add# it
yourself with a LoadModule [see the DSO paragraph in the 'Global#
Environment' section], or recompile the server and include mod_mime_magic#
as part of the configuration), so it's enclosed in an <IfModule> container.#
This means that the MIMEMagicFile directive will only be processed if the#
module is part of the server.#<IfModule mod_mime_magic.c># MIMEMagicFile
/usr/share/magic.mime MIMEMagicFile conf/magic</IfModule>##
HostnameLookups: Log the names of clients or just their IP addresses# e.g.,
www.apache.org (on) or 204.62.129.132 (off).# The default is off because
it'd be overall better for the net if people# had to knowingly turn this
feature on, since enabling it means that# each client request will result in
AT LEAST one lookup request to the# nameserver.#HostnameLookups Off##
ErrorLog: The location of the error log file.# If you do not specify an
ErrorLog directive within a <VirtualHost># container, error messages
relating to that virtual host will be# logged here. If you *do* define an
error logfile for a <VirtualHost># container, that host's errors will be
logged there and not here.#ErrorLog logs/error_log## LogLevel: Control the
number of messages logged to the error_log.# Possible values include: debug,
info, notice, warn, error, crit,# alert, emerg.#LogLevel warn## The
following directives define some format nicknames for use with# a CustomLog
directive (see below).#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
\"%{User-Agent}i\"" combinedLogFormat "%h %l %u %t \"%r\" %>s %b"
commonLogFormat "%{Referer}i -> %U" refererLogFormat "%{User-agent}i"
agent## The location and format of the access logfile (Common Logfile
Format).# If you do not define any access logfiles within a <VirtualHost>#
container, they will be logged here. Contrariwise, if you *do*# define
per-<VirtualHost> access logfiles, transactions will be# logged therein and
*not* in this file.## CustomLog /var/log/httpd/access_log commonCustomLog
logs/access_log combined## If you would like to have agent and referer
logfiles, uncomment the# following directives.##CustomLog logs/referer_log
referer#CustomLog logs/agent_log agent## If you prefer a single logfile with
access, agent, and referer information# (Combined Logfile Format) you can
use the following directive.##CustomLog logs/access_log combined##
Optionally add a line containing the server version and virtual host# name
to server-generated pages (error documents, FTP directory listings,#
mod_status and mod_info output etc., but not CGI generated documents).# Set
to "EMail" to also include a mailto: link to the ServerAdmin.# Set to one
of: On | Off | EMail#ServerSignature On# EBCDIC configuration:# (only for
mainframes using the EBCDIC codeset, currently one of:# Fujitsu-Siemens'
BS2000/OSD, IBM's OS/390 and IBM's TPF)!!# The following default
configuration assumes that "text files"# are stored in EBCDIC (so that you
can operate on them using the# normal POSIX tools like grep and sort) while
"binary files" are# stored with identical octets as on an ASCII machine.##
The directives are evaluated in configuration file order, with# the
EBCDICConvert directives applied before EBCDICConvertByType.## If you want
to have ASCII HTML documents and EBCDIC HTML documents# at the same time,
you can use the file extension to force# conversion off for the ASCII
documents:# > AddType text/html .ahtml# > EBCDICConvert Off=InOut
.ahtml## EBCDICConvertByType On=InOut text/* message/* multipart/*#
EBCDICConvertByType On=In application/x-www-form-urlencoded#
EBCDICConvertByType On=InOut application/postscript model/vrml#
EBCDICConvertByType Off=InOut */*## Aliases: Add here as many aliases as you
need (with no limit). The format is # Alias fakename realname#<IfModule
mod_alias.c> # # Note that if you include a trailing / on fakename
then the server will # require it to be present in the URL. So "/icons"
isn't aliased in this # example, only "/icons/". If the fakename is
slash-terminated, then the # realname must also be slash terminated, and
if the fakename omits the # trailing slash, the realname must also omit
it. # Alias /icons/ "/var/www/icons/" <Directory "/var/www/icons">
Options Indexes MultiViews AllowOverride None Order allow,deny
Allow from all </Directory> # This Alias will project the on-line
documentation tree under /manual/ # even if you change the DocumentRoot.
Comment it if you don't want to # provide access to the on-line
documentation. # # Alias /manual/ "/etc/httpd/htdocs/manual/" #
# <Directory "/etc/httpd/htdocs/manual"> # Options Indexes
FollowSymlinks MultiViews # AllowOverride None # Order
allow,deny # Allow from all # </Directory> # # ScriptAlias:
This controls which directories contain server scripts. # ScriptAliases
are essentially the same as Aliases, except that # documents in the
realname directory are treated as applications and # run by the server
when requested rather than as documents sent to the client. # The same
rules about trailing "/" apply to ScriptAlias directives as to # Alias.
# ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" # # "/var/www/cgi-bin"
should be changed to whatever your ScriptAliased # CGI directory exists,
if you have that configured. # <Directory "/var/www/cgi-bin">
AllowOverride None Options None Order allow,deny Allow
from all </Directory></IfModule># End of aliases.## Redirect allows you
to tell clients about documents which used to exist in# your server's
namespace, but do not anymore. This allows you to tell the# clients where to
look for the relocated document.# Format: Redirect old-URI new-URL###
Directives controlling the display of server-generated directory
listings.#<IfModule mod_autoindex.c> # # FancyIndexing is whether you
want fancy directory indexing or standard # IndexOptions FancyIndexing
NameWidth=* # # AddIcon* directives tell the server which icon to show
for different # files or filename extensions. These are only displayed
for # FancyIndexed directories. # AddIconByEncoding
(CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType
(TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif)
image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType
(VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon
/icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon
/icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai
.eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon
/icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl
.py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon
/icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh
.ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif
^^BLANKICON^^ # # DefaultIcon is which icon to show for files which do
not have an icon # explicitly set. # DefaultIcon /icons/unknown.gif
# # AddDescription allows you to place a short description after a file
in # server-generated indexes. These are only displayed for FancyIndexed
# directories. # Format: AddDescription "description" filename #
#AddDescription "GZIP compressed document" .gz #AddDescription "tar
archive" .tar #AddDescription "GZIP compressed tar archive" .tgz #
# ReadmeName is the name of the README file the server will look for by #
default, and append to directory listings. # # HeaderName is the name
of a file which should be prepended to # directory indexes. # # If
MultiViews are amongst the Options in effect, the server will # first
look for name.html and include it if found. If name.html # doesn't
exist, the server will then look for name.txt and include # it as
plaintext if found. # ReadmeName README HeaderName HEADER # #
IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
# IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t</IfModule># End
of indexing directives.## Document types.#<IfModule mod_mime.c> # #
AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this. # Despite
the name similarity, the following Add* directives have nothing # to do
with the FancyIndexing customization directives above. # AddEncoding
x-compress Z AddEncoding x-gzip gz tgz # # AddLanguage allows you
to specify the language of a document. You can # then use content
negotiation to give a browser a file in a language # it can understand.
# # Note 1: The suffix does not have to be the same as the language #
keyword --- those with documents in Polish (whose net-standard #
language code is pl) may wish to use "AddLanguage pl .po" to # avoid the
ambiguity with the common suffix for perl scripts. # # Note 2: The
example entries below illustrate that in quite # some cases the two
character 'Language' abbreviation is not # identical to the two character
'Country' code for its country, # E.g. 'Danmark/dk' versus 'Danish/da'.
# # Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get # the
reference data for rfc1766 cleaned up. # # Danish (da) - Dutch (nl) -
English (en) - Estonian (ee) # French (fr) - German (de) - Greek-Modern
(el) # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk
(nn) # Portugese (pt) - Luxembourgeois* (ltz) # Spanish (es) - Swedish
(sv) - Catalan (ca) - Czech(cz) # Polish (pl) - Brazilian Portuguese
(pt-br) - Japanese (ja) # Russian (ru) # AddLanguage da .dk
AddLanguage nl .nl AddLanguage en .en AddLanguage et .ee
AddLanguage fr .fr AddLanguage de .de AddLanguage el .el
AddLanguage he .he AddCharset ISO-8859-8 .iso8859-8 AddLanguage it .it
AddLanguage ja .ja AddCharset ISO-2022-JP .jis AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr AddLanguage nn .nn AddLanguage no .no
AddLanguage pl .po AddCharset ISO-8859-2 .iso-pl AddLanguage pt .pt
AddLanguage pt-br .pt-br AddLanguage ltz .lu AddLanguage ca .ca
AddLanguage es .es AddLanguage sv .sv AddLanguage cz .cz
AddLanguage ru .ru AddLanguage zh-tw .tw AddLanguage tw .tw
AddCharset Big5 .Big5 .big5 AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866 AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4 AddCharset UTF-8 .utf8 #
LanguagePriority allows you to give precedence to some languages # in
case of a tie during content negotiation. # # Just list the languages
in decreasing order of preference. We have # more or less alphabetized
them here. You probably want to change this. # <IfModule
mod_negotiation.c> LanguagePriority en da nl et fr de el it ja kr no
pl pt pt-br ru ltz ca es sv tw </IfModule> # # AddType allows you
to tweak mime.types without actually editing it, or to # make certain
files to be certain types. # AddType application/x-tar .tgz AddType
image/x-icon .ico # # These types cause httpd to let the PHP
interpreter handle files with # the specified extensions. #
<IfModule mod_php4.c> AddType application/x-httpd-php .php .php4
.php3 .phtml AddType application/x-httpd-php-source .phps
</IfModule> <IfModule mod_php3.c> AddType application/x-httpd-php3
.php3 AddType application/x-httpd-php3-source .phps </IfModule>
<IfModule mod_php.c> AddType application/x-httpd-php .phtml
</IfModule> # # AddHandler allows you to map certain file extensions
to "handlers", # actions unrelated to filetype. These can be either built
into the server # or added with the Action command (see below) # #
If you want to use server side includes, or CGI outside # ScriptAliased
directories, uncomment the following lines. # # To use CGI scripts:
# #AddHandler cgi-script .cgi # # To use server-parsed HTML files
# AddType text/html .shtml AddHandler server-parsed .shtml # #
Uncomment the following line to enable Apache's send-asis HTTP file #
feature # #AddHandler send-as-is asis # # If you wish to use
server-parsed imagemap files, use # AddHandler imap-file map # #
To enable type maps, you might want to use # #AddHandler type-map
var</IfModule># End of document types.## Action lets you define media types
that will execute a script whenever# a matching file is called. This
eliminates the need for repeated URL# pathnames for oft-used CGI file
processors.# Format: Action media/type /cgi-script/location# Format: Action
handler-name /cgi-script/location### MetaDir: specifies the name of the
directory in which Apache can find# meta information files. These files
contain additional HTTP headers# to include when sending the
document##MetaDir .web## MetaSuffix: specifies the file name suffix for the
file containing the# meta information.##MetaSuffix .meta## Customizable
error response (Apache style)# these come in three flavors## 1) plain
text#ErrorDocument 500 "The server made a boo boo.# n.b. the single
leading (") marks it as text, it does not get output## 2) local
redirects#ErrorDocument 404 /missing.html# to redirect to local URL
/missing.html#ErrorDocument 404 /cgi-bin/missing_handler.pl# N.B.: You can
redirect to a script or a document using server-side-includes.## 3)
external redirects#ErrorDocument 402
http://some.other-server.com/subscription_info.html# N.B.: Many of the
environment variables associated with the original# request will *not* be
available to such a script.## Customize behaviour based on the
browser#<IfModule mod_setenvif.c> # # The following directives modify
normal HTTP response behavior. # The first directive disables keepalive
for Netscape 2.x and browsers that # spoof it. There are known problems
with these browser implementations. # The second directive is for
Microsoft Internet Explorer 4.0b2 # which has a broken HTTP/1.1
implementation and does not properly # support keepalive when it is used
on 301 or 302 (redirect) responses. # BrowserMatch "Mozilla/2"
nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
force-response-1.0 # # The following directive disables HTTP/1.1
responses to browsers which # are in violation of the HTTP/1.0 spec by
not being able to grok a # basic 1.1 response. # BrowserMatch
"RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0"
force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0</IfModule>#
End of browser customization directives## If the perl module is installed,
this will allow execution of mod_perl# to compile your scripts to
subroutines which it will execute directly,# avoiding the costly compile
process for most requests.##<IfModule mod_perl.c># Alias /perl
/var/www/perl# <Directory /var/www/perl># SetHandler perl-script#
PerlHandler Apache::Registry# Options +ExecCGI#
</Directory>#</IfModule>## Allow http put (such as Netscape Gold's publish
feature)# Use htpasswd to generate /etc/httpd/conf/passwd.##<IfModule
mod_put.c># Alias /upload /tmp# <Directory /tmp># EnablePut On#
AuthType Basic# AuthName Temporary# AuthUserFile
/etc/httpd/conf/passwd# EnableDelete Off# umask 007#
<Limit PUT># require valid-user# </Limit>#
</Directory>#</IfModule>## Allow server status reports, with the URL of
http://servername/server-status# Change the ".your-domain.com" to match your
domain to enable.##<Location /server-status># SetHandler server-status#
Order deny,allow# Deny from all# Allow from
.your-domain.com#</Location>## Allow remote server configuration reports,
with the URL of# http://servername/server-info (requires that mod_info.c be
loaded).# Change the ".your-domain.com" to match your domain to
enable.##<Location /server-info># SetHandler server-info# Order
deny,allow# Deny from all# Allow from .your-domain.com#</Location>##
Allow access to local system documentation from localhost#Alias /doc/
/usr/share/doc/<Directory /usr/share/doc> order deny,allow deny from
all allow from localhost .localdomain Options Indexes
FollowSymLinks</Directory>## There have been reports of people trying to
abuse an old bug from pre-1.1# days. This bug involved a CGI script
distributed as a part of Apache.# By uncommenting these lines you can
redirect these attacks to a logging # script on phf.apache.org. Or, you can
record them yourself, using the script#
support/phf_abuse_log.cgi.##<Location /cgi-bin/phf*># Deny from all#
ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi#</Location>##
Proxy Server directives. Uncomment the following lines to# enable the proxy
server:##<IfModule mod_proxy.c># ProxyRequests On# <Directory
proxy:*># Order deny,allow# Deny from all# Allow from
.your-domain.com# </Directory> # # Enable/disable the handling of
HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block"
removes all outgoing Via: headers) # Set to one of: Off | On | Full |
Block ## ProxyVia On # # To enable the cache as well, edit and
uncomment the following lines: # (no caching without CacheRoot) ##
CacheRoot "/var/cache/httpd"# CacheSize 5# CacheGcInterval 4#
CacheMaxExpire 24# CacheLastModifiedFactor 0.1# CacheDefaultExpire 1#
NoCache a-domain.com another-domain.edu joes.garage-sale.com#</IfModule>#
End of proxy directives.### Section 3: Virtual Hosts## VirtualHost: If you
want to maintain multiple domains/hostnames on your# machine you can setup
VirtualHost containers for them. Most configurations# use only name-based
virtual hosts so the server doesn't need to worry about# IP addresses. This
is indicated by the asterisks in the directives below.## Please see the
documentation at <URL:http://www.apache.org/docs/vhosts/># for further
details before you try to setup virtual hosts.## You may use the command
line option '-S' to verify your virtual host# configuration.## Use
name-based virtual hosting.##NameVirtualHost *## VirtualHost example:#
Almost any Apache directive may go into a VirtualHost container.# The first
VirtualHost section is used for requests without a known# server
name.##<VirtualHost *># ServerAdmin [EMAIL PROTECTED]#
DocumentRoot /www/docs/dummy-host.example.com# ServerName
dummy-host.example.com# ErrorLog logs/dummy-host.example.com-error_log#
CustomLog logs/dummy-host.example.com-access_log
common#</VirtualHost>#<VirtualHost _default_:*>#</VirtualHost>#### SSL
Global Context#### All SSL configuration in this context applies both to##
the main server and all SSL-enabled virtual hosts.#### Some MIME-types for
downloading Certificates and CRLs#<IfDefine HAVE_SSL>AddType
application/x-x509-ca-cert .crtAddType application/x-pkcs7-crl
.crl</IfDefine><IfModule mod_ssl.c># Pass Phrase Dialog:# Configure the
pass phrase gathering process.# The filtering dialog program (`builtin' is
a internal# terminal dialog) has to provide the pass phrase on
stdout.SSLPassPhraseDialog builtin# Inter-Process Session Cache:#
Configure the SSL Session Cache: First the mechanism # to use and second
the expiring timeout (in seconds).#SSLSessionCache
none#SSLSessionCache shmht:logs/ssl_scache(512000)#SSLSessionCache
shmcb:logs/ssl_scache(512000)SSLSessionCache
dbm:logs/ssl_scacheSSLSessionCacheTimeout 300# Semaphore:# Configure
the path to the mutual exclusion semaphore the# SSL engine uses internally
for inter-process synchronization. SSLMutex file:logs/ssl_mutex# Pseudo
Random Number Generator (PRNG):# Configure one or more sources to seed the
PRNG of the # SSL library. The seed data should be of good random
quality.# WARNING! On some platforms /dev/random blocks if not enough
entropy# is available. This means you then cannot use the /dev/random
device# because it would lead to very long connection times (as long as#
it requires to make more entropy available). But usually those# platforms
additionally provide a /dev/urandom device which doesn't# block. So, if
available, use this one instead. Read the mod_ssl User# Manual for more
details.SSLRandomSeed startup builtinSSLRandomSeed connect
builtin#SSLRandomSeed startup file:/dev/random 512#SSLRandomSeed startup
file:/dev/urandom 512#SSLRandomSeed connect file:/dev/random
512#SSLRandomSeed connect file:/dev/urandom 512# Logging:# The home of
the dedicated SSL protocol logfile. Errors are# additionally duplicated in
the general error log file. Put# this somewhere where it cannot be used
for symlink attacks on# a real server (i.e. somewhere where only root can
write).# Log levels are (ascending order: higher ones include lower
ones):# none, error, warn, info, trace, debug.SSLLog
logs/ssl_engine_logSSLLogLevel error</IfModule><IfDefine HAVE_SSL>#### SSL
Virtual Host Context##<VirtualHost _default_:443># General setup for the
virtual host#DocumentRoot "/etc/httpd/htdocs"#ServerName
new.host.name#ServerAdmin [EMAIL PROTECTED] logs/error_logTransferLog
logs/access_log# SSL Engine Switch:# Enable/Disable SSL for this virtual
host.SSLEngine on# SSL Cipher Suite:# List the ciphers that the client
is permitted to negotiate.# See the mod_ssl documentation for a complete
list.#SSLCipherSuite
ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL# Server
Certificate:# Point SSLCertificateFile at a PEM encoded certificate. If#
the certificate is encrypted, then you will be prompted for a# pass
phrase. Note that a kill -HUP will prompt again. A test# certificate can
be generated with `make certificate' under# built time. Keep in mind that
if you've both a RSA and a DSA# certificate you can configure both in
parallel (to also allow# the use of DSA ciphers, etc.)SSLCertificateFile
/etc/httpd/conf/ssl.crt/server.crt#SSLCertificateFile
/etc/httpd/conf/ssl.crt/server-dsa.crt# Server Private Key:# If the key
is not combined with the certificate, use this# directive to point at the
key file. Keep in mind that if# you've both a RSA and a DSA private key
you can configure# both in parallel (to also allow the use of DSA ciphers,
etc.)SSLCertificateKeyFile
/etc/httpd/conf/ssl.key/server.key#SSLCertificateKeyFile
/etc/httpd/conf/ssl.key/server-dsa.key# Server Certificate Chain:# Point
SSLCertificateChainFile at a file containing the# concatenation of PEM
encoded CA certificates which form the# certificate chain for the server
certificate. Alternatively# the referenced file can be the same as
SSLCertificateFile# when the CA certificates are directly appended to the
server# certificate for convinience.#SSLCertificateChainFile
/etc/httpd/conf/ssl.crt/ca.crt# Certificate Authority (CA):# Set the CA
certificate verification path where to find CA# certificates for client
authentication or alternatively one# huge file containing all of them
(file must be PEM encoded)# Note: Inside SSLCACertificatePath you need
hash symlinks# to point to the certificate files. Use the provided#
Makefile to update the hash symlinks after changes.#SSLCACertificatePath
/etc/httpd/conf/ssl.crt#SSLCACertificateFile
/etc/httpd/conf/ssl.crt/ca-bundle.crt# Certificate Revocation Lists
(CRL):# Set the CA revocation path where to find CA CRLs for client#
authentication or alternatively one huge file containing all# of them
(file must be PEM encoded)# Note: Inside SSLCARevocationPath you need hash
symlinks# to point to the certificate files. Use the provided#
Makefile to update the hash symlinks after changes.#SSLCARevocationPath
/etc/httpd/conf/ssl.crl#SSLCARevocationFile
/etc/httpd/conf/ssl.crl/ca-bundle.crl# Client Authentication (Type):#
Client certificate verification type and depth. Types are# none,
optional, require and optional_no_ca. Depth is a# number which specifies
how deeply to verify the certificate# issuer chain before deciding the
certificate is not valid.#SSLVerifyClient require#SSLVerifyDepth 10#
Access Control:# With SSLRequire you can do per-directory access control
based# on arbitrary complex boolean expressions containing server#
variable checks and other lookup directives. The syntax is a# mixture
between C and Perl. See the mod_ssl documentation# for more
details.#<Location />#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \#
and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \# and
%{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \# and
%{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \# and %{TIME_HOUR} >= 8
and %{TIME_HOUR} <= 20 ) \# or %{REMOTE_ADDR} =~
m/^192\.76\.162\.[0-9]+$/#</Location># SSL Engine Options:# Set various
options for the SSL engine.# o FakeBasicAuth:# Translate the client
X.509 into a Basic Authorisation. This means that# the standard
Auth/DBMAuth methods can be used for access control. The# user name is
the `one line' version of the client's X.509 certificate.# Note that no
password is obtained from the user. Every entry in the user# file needs
this password: `xxj31ZMTZzkVA'.# o ExportCertData:# This exports two
additional environment variables: SSL_CLIENT_CERT and# SSL_SERVER_CERT.
These contain the PEM-encoded certificates of the# server (always
existing) and the client (only existing when client# authentication is
used). This can be used to import the certificates# into CGI scripts.#
o StdEnvVars:# This exports the standard SSL/TLS related `SSL_*'
environment variables.# Per default this exportation is switched off for
performance reasons,# because the extraction step is an expensive
operation and is usually# useless for serving static content. So one
usually enables the# exportation for CGI and SSI requests only.# o
CompatEnvVars:# This exports obsolete environment variables for backward
compatibility# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and
Stronghold 2.x. Use this# to provide compatibility to existing CGI
scripts.# o StrictRequire:# This denies access when "SSLRequireSSL" or
"SSLRequire" applied even# under a "Satisfy any" situation, i.e. when it
applies access is denied# and no other module can change it.# o
OptRenegotiate:# This enables optimized SSL connection renegotiation
handling when SSL# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars
+StrictRequire<Files ~ "\.(cgi|shtml|phtml|php3?)$"> SSLOptions
+StdEnvVars</Files><Directory "/var/www/cgi-bin"> SSLOptions
+StdEnvVars</Directory># SSL Protocol Adjustments:# The safe and default
but still SSL/TLS standard compliant shutdown# approach is that mod_ssl
sends the close notify alert but doesn't wait for# the close notify alert
from client. When you need a different shutdown# approach you can use one
of the following variables:# o ssl-unclean-shutdown:# This forces an
unclean shutdown when the connection is closed, i.e. no# SSL close
notify alert is send or allowed to received. This violates# the SSL/TLS
standard but is needed for some brain-dead browsers. Use# this when you
receive I/O errors because of the standard approach where# mod_ssl sends
the close notify alert.# o ssl-accurate-shutdown:# This forces an
accurate shutdown when the connection is closed, i.e. a# SSL close
notify alert is send and mod_ssl waits for the close notify# alert of
the client. This is 100% SSL/TLS standard compliant, but in# practice
often causes hanging connections with brain-dead browsers. Use# this
only for browsers where you know that their SSL implementation# works
correctly. # Notice: Most problems of broken clients are also related to
the HTTP# keep-alive facility, so you usually additionally want to
disable# keep-alive for those clients, too. Use variable "nokeepalive" for
this.# Similarly, one has to force some clients to use HTTP/1.0 to
workaround# their broken HTTP/1.1 implementation. Use variables
"downgrade-1.0" and# "force-response-1.0" for this.SetEnvIf User-Agent
".*MSIE.*" \ nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0# Per-Server Logging:# The home of a
custom SSL log file. Use this when you want a# compact non-error SSL
logfile on a virtual host basis.CustomLog logs/ssl_request_log \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"</VirtualHost>
</IfDefine>MidgardDatabase midgard midgard MVQ3zpzXkifkX## Uncomment this if
you want serve files instead of Midgard URLs## where there's a match for
both. You'd want to use this if you have## active pages and you're using
static dummy pages to force this## behaviour. Note that this setting is
apache-wide, not per-host.# MidgardFavorFiles On## Uncomment this for PHP3,#
MidgardRootFile "/usr/lib/apache/midgard-root.php3"## or this for
PHP4MidgardRootFile "/usr/lib/apache/midgard-root.php"Listen
8001NameVirtualHost 127.0.0.1:8001<VirtualHost 127.0.0.1:8001>
MidgardEngine On ServerName localhost Port 8001 # Switch off
magic quotes - it is required with Midgard php_value magic_quotes_gpc off
php_value magic_quotes_runtime off php_value short_open_tag on
php_value register_globals on # Configure text parser: # Change to
'russian' for Russian Midgard MidgardParser latin1 MidgardBlobDir
"/var/www/blobs" # Configuration for Russian Midgard: <IfModule
mod_charset.c> # default charset for real or virtual server (selected if
all other charset- # selections methods fails) CharsetDefault koi8-r
# Default source (on-disk) charset (we keep all content in DB in KOI8-R
# encoding). If you want different encoding, please re-encode midgard-ru.sql
# before inserting it into DB too. CharsetSourceEnc koi8-r # Force
mod_charset to do its work CharsetDisable Off
</IfModule></VirtualHost>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
