Branden,
I'm pretty sure you can run your TM 88IV with 1.8 too. There is no essential stuffes in following versions (except if you need very
specific hardwares, check the differences)
Jacques
From: "Branden Strickland" <[EMAIL PROTECTED]>
AHAH!!! (excited find)
in the document describing changes in 1.9 (*EPSON JavaPOS ADK Application
Conversion Guide
(Changes to Version 1.9L/W)*
It states "2.1.3 File configuration
The configuration of the files that comprise EPSON JavaPOS ADK has changed.
The file configuration of the previous version was as follows (for Version
1.82L/W).
- xercesImpl.jar
- xml-apis.jar
- Jpos18.jar
- epsonJposService182.jar
- epsonJposServiceCommon.jar
From Version 1.9L/W, the file configuration is as follows (for Version 1.9L
/W).
- xercesImpl.jar
- xml-apis.jar
- jpos19.jar
- epsonupos.jar
- uposcommon.jar
- linuxUsbDriver.jar
- pos.jar
Please note that due to this change, it may be necessary to change the
parameters of the commands and so on when starting the application."
I'm not finished yet (as I'm at work...shhh don't tell the boss). But I'm
hoping to confirm that I'm retarded tonight. (I should have read the
document before...but as we've all seen... I'm a bit of "a bull in a china
shop" when it comes to reading before proceeding when I'm excited).
Branden -
On Mon, Mar 24, 2008 at 12:00 PM, Branden Strickland <
[EMAIL PROTECTED]> wrote:
Apologies for the bad grammar in the last message. It was a late night
for me.
I found this
http://www.mail-archive.com/user@ofbiz.apache.org/msg01641.html
and this
http://mail-archives.apache.org/mod_mbox/ofbiz-dev/200705.mbox/[EMAIL PROTECTED]
Which seem to be the same thread, but with Jacques's response missing from
the first post.
Has anyone gotten the new version of ADK to work? It seems from those
threads that the ADK of 1.9 was in question. I searched more this morning
in the EPSON ADK directory and still can't find a build file. Infact,
although I installed the "dev" portion of the software, the only .java files
I get are from the examples directory.
Odd? I think so.
I'd say I'll just use an older version of ADK but I'm not sure if it'll
work on the TM 88IV that I have.
Ugh, This printer is the last piece to my little POS puzzle (for the time
being). I got the ELO touchscreen working (with the help of OFBIZ docs) Now
I just have to finish this little piece and I can successfully start to do
all the other fun stuff :P
Gentlemen, your patience with me is amazing!
Thanks-
On Sun, Mar 23, 2008 at 11:37 PM, Branden Strickland <
[EMAIL PROTECTED]> wrote:
> Jacques,
>
> That page was a huge amount of help. Unfortunately I'm still stuck at
> one particular par that I think you may at least (with your knowledge of how
> JAVA works).
>
> I'm still getting the "Service does not exist in loaded JCL registry"
> error.
>
> Can you please shed some light on the following.
>
> I think it may have to do with my jpos.xml config and / or my
> epsonJposService18*.jar files.
>
> 1) In th example (I realize they'll be a bit different depending on the
> version of ADK and your specific printer.) but in my jpos.xml entry I
> have
> <JposEntry logicalName="EpsonTM">
> <creation factoryClass="
> jp.co.epson.uposcommon.util.EpsonJposServiceInstanceFactory"
> serviceClass="jp.co.epson.upos.pntr.T88IVService"/>
>
> the class path is so much different than the example. My question is
> this. How do I follow this path back to confirm? I know in ofbiz (where I
> actually learned how to follow these paths) that it's all in the "src" files
> and you just follow the path org.ofbiz.pos etc. etc. How do I follow
> the JPOS entry? I can't find anything to confirm if I need to change the
> uposcommon to jpos180 (like in the instructions that you pointed me to).
>
> 2) I still can't for the life of me find the 2 jars except where I
> found them before. I feel like I should be able to build them but I don't
> have a build file ANYWHERE in my Epson ADK directory. If there should be,
> than that MAY be my problem!! ;)
>
> as always,
>
> Thanks guys!
>
>
>
> On Sat, Mar 22, 2008 at 10:36 PM, Branden Strickland <
> [EMAIL PROTECTED]> wrote:
>
> > I'll read over that this weekend.
> >
> > Thanks Jacques.. .I was actually looking for this page earlier but
> > couldn't find it by searching at ofbiz.apache.org.
> >
> > Appreciate it.. I'll be sure to post back if I don't get
> > it............. :P
> >
> > On Fri, Mar 21, 2008 at 8:46 AM, Jacques Le Roux <
> > [EMAIL PROTECTED]> wrote:
> >
> > > Did you read this carefully :
> > >
> > >
http://docs.ofbiz.org/display/OFBIZ/POS+System#POSSystem- HowsetuptheEpsonJavaPOSADK1.801.82forOFBiz?\! <http://docs.ofbiz.org/display/OFBIZ/POS+System#POSSystem-%C2%A0HowsetuptheEpsonJavaPOSADK1.801.82forOFBiz?%5C%21 >;
> > > Actually all the
> > > page should interest you...
> > >
> > > Jacques
> > >
> > > From: "Branden Strickland" <[EMAIL PROTECTED]>
> > > > Update: still not working:
> > > > I stole the .jars from
> > > >
> > >
https://svn.hotwaxmedia.com/crucible/browse/ofbiz/trunk/applications/pos/lib/epsonJposServiceCommon.jar
> > > >
> > > > put them in specialpurpose/pos/lib/
> > > > I'm using JDK 1.6
> > > > EPSON JavaPOS ADK Ver.1.11L
> > > >
> > > > I get this
> > > > 2008-03-20 13:42:43,575 (main) [ DeviceLoader.java:62
> > > :ERROR]
> > > > ---- exception report
> > > > ----------------------------------------------------------
> > > > JPOS Exception
> > > > Exception: jpos.JposException
> > > > Message: Service does not exist in loaded JCL registry
> > > > ---- stack trace
> > > > ---------------------------------------------------------------
> > > > jpos.JposException: Service does not exist in loaded JCL registry
> > > > jpos.loader.simple.SimpleServiceManager.createConnection(Unknown
> > > Source)
> > > > jpos.loader.JposServiceLoader.findService(Unknown Source)
> > > > jpos.BaseJposControl.open(Unknown Source)
> > > > org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:44)
> > > > org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:60)
> > > > org.ofbiz.pos.container.JposDeviceContainer.start(
> > > JposDeviceContainer.java
> > > > :50)
> > > > org.ofbiz.base.container.ContainerLoader.start(
> > > ContainerLoader.java:79)
> > > > org.ofbiz.base.start.Start.startStartLoaders(Start.java:261)
> > > > org.ofbiz.base.start.Start.startServer(Start.java:310)
> > > > org.ofbiz.base.start.Start.start(Start.java:314)
> > > > org.ofbiz.base.start.Start.main(Start.java:397)
> > > >
> > > >
> > > > Thanks guys!
> > > > On Thu, Mar 20, 2008 at 1:40 PM, Branden Strickland <
> > > > [EMAIL PROTECTED]> wrote:
> > > >
> > > >> Ok, I think about set up with this thermal printer, but I have a
> > > very
> > > >> important question.
> > > >>
> > > >> I've gone through and set up Linux's RXTX for the serial cable
> > > .
> > > >> I've set up EPSON JavaPOS ADK for TM series printers. (which
> > > included
> > > >> also setting up Java Communications API)
> > > >>
> > > >> I can't for the life of me figure out 2 things.
> > > >> 1) I'm required to provide 2 jar files that I can't find
> > > anywhere, and as
> > > >> far as I can tell, I can't build the jar from anything either.
> > > >> 2) My thermal printer is parallel right now, I probably have to
> > > get a
> > > >> parallel to serial converter for this to work eh? Or is parallel
> > > considered
> > > >> a 24 pin serial?
> > > >>
> > > >> Thanks!
> > > >>
> > > >
> > >
> > >
> >
>
