Jacopo:
is there a place you suggest we put this so it can be linked to?
Jacopo Cappellato sent the following on 7/25/2008 11:39 AM:
> This seems like a deja-vu, however:
>
> On Jul 25, 2008, at 7:49 PM, ankur gupta wrote:
>
>> I just want to accomplish one manufacturing process as follows :
>>
>> A------------------------>B--------------------->Finished product
>> (requries (requires raw
>> raw material material as c
>> a and b and and d and
>> outputs c) outputs finished
>> product)
>>
>>
>> here A and B are the routing tasks. What I have done is I have
>> defined c
>> as "work in progress" but when I create the production run for finished
>> product it does not shows the requirement of a and b whether BOM is
>> defined
>> for finished product or for c and finished product both. Someone please
>> share your thoughts on this.
>
> The requirement is represented by another production run that must be
> executed before the production run for the finished product.
> If you really want to see the materials required by the two production
> runs, you'll have to implement a custom screen (pretty easy task).
>
> However, you may also not use the WIP concept and simply create a bom
> like this:
>
> Finished Product
> |
> |________> MAT_A
> |
> |________> MAT_B
> |
> |________> MAT_D
>
> and specify in the BOM record for MAT_D the routing task B as the
> routing task that will use the material (you should find that field in
> the Edit BOM screen).
> The production run will then issue MAT_A and MAT_B when the first task
> is run (A) and MAT_D when the task B is run.
>
> Jacopo
>
>>
>> here I have created
>>
>> - Ram materials as RAW_A, RAW_B, RAW_D and RAW_C as work in progress.
>> - I have created two routing tasks as TASK_A and TASK_B. Task_A uses
>> RAW_A and RAW_B as raw material to produce RAW_C. And, TASK_B uses
>> RAW_C and RAW_D as raw materials to produce the finished good.
>> - Then I have created routing called RoutingA-B having routing task
>> A and
>> B.
>> - Then I have created BOM for finished product only mentioning raw
>> materials RAW_A, RAW_B for sequence 1 and RAW_C and RAW_D for
>> sequence 2.
>> - Now creating a production run for finished product in jobshop it
>> does
>> not shows the requirement for RAW_A and RAW_B.
>> - Then I have also created BOM for RAW_C and finished product
>> separately
>> also and it shows the dependent processes between the two.
>> - also when I RAW_C get produced in the production run it does not show
>> as inventory in facility is it due to its status as Work in Progress ?
>>
>> Please suggest the way out...
>
