nano /opt/redXX/conf/jee-container.xml UNCOMMENT / COMMENT
<!-- Tomcat without SSL enabled --> <!-- Tomcat with SSL enabled --> De : Tom Luo [mailto:[email protected]] Envoyé : 16 novembre 2017 10:36 À : [email protected] Objet : Re: https port Does anyone know why? On Thu, Nov 16, 2017 at 12:36 AM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: Hi, I set RTMPS to listen at 8443 in red5.properties. However, when I use "sudo netstat -plnt" to check all ports, nothing is listening at port 8443. Does anyone know why? Thanks, Tom On Sat, Nov 11, 2017 at 8:43 PM, Maxim Solodovnik <[email protected]<mailto:[email protected]>> wrote: http://openmeetings.apache.org/RTMPSAndHTTPS.html#Native_RTMPS After configuring OM server and successful run (without any errors) You need to set correct properties in Admin->Config In case of native RTMPS your HTTPS and RTMPS port should be 1) different 2) accessible According to dev console As I wrote before Detailed config with all data, host port modes, urls is available at the time of first connect There is the message "appInit()" followed by the object with all settings On Sat, Nov 11, 2017 at 12:12 PM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: Hi, Maxim, I am also confused. Do you mean my system is trying native RTMPS or tunneling RTMPS? I want to use native RTMPS. If you can tell me how to setup native RTMPS for OM4.0, it will be great. Right now, I feel the instructions are not clear. Best, Tom On Fri, Nov 10, 2017 at 11:52 PM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: Actually, I have never seen these options in chrome dev console. Do I have to turn on the debug mode of OM4,0? On Thu, Nov 9, 2017 at 9:31 PM, Maxim Solodovnik <[email protected]<mailto:[email protected]>> wrote: It seems Flash trying to talk RTMPTS with RTMPS service Could you share these options 1. fallback: "rtmpt://localhost:5080/openmeetings/11" 2. mode: "broadcast" 3. native:"false" 4. rtmpPort: "1935" 5. rtmpsPort:"8443" 6. secure:"false" 7. Available in DEV console during appInit() call On Fri, Nov 10, 2017 at 12:23 AM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: Hi, Maxim, I turned on the debug mode and I did see error messages in the Chrome debug console. But I don't know how to fix the problems. Do you know how? Please see the messages below. ["onselect WxH :: 120x90"] VM497:1 ["resize:: 120x90"] VM498:1 ["Camera selected:: 0"] VM499:1 ["Entering getCam ..."] VM500:1 ["IS NO INTERVIEW "] VM501:1 ["... getCam DONE [object Camera]"] VM502:1 (2) ["Camera selected:: [object Camera]", false] VM504:1 ["Entering getCam ..."] VM505:1 ["IS NO INTERVIEW "] VM506:1 ["... getCam DONE [object Camera]"] VM507:1 ["_attachCamera():: muted ? false"] VM508:1 ["_attachCamera()::done"] :8443/open/1:1 POST https://www.ideastoproduct.net:8443/open/1 net::ERR_EMPTY_RESPONSE VM512:1 ["ConnectionStatus: NetConnection.Connect.Failed"] VM517:1 (2) ["setRightsCallback", Array(1)] VM518:1 (3) ["_updateExclusive", Array(1), Array(3)] VM705:1 (2) ["appInit()", {…}] VM706:1 ["resize:: 300x200"] VM707:1 (2) ["NetConnection is not connected", "rtmps://www.ideastoproduct.net:8443/openmeetings/2<http://www.ideastoproduct.net:8443/openmeetings/2>"] :8443/open/1:1 POST https://www.ideastoproduct.net:8443/open/1 net::ERR_EMPTY_RESPONSE VM798:1 ["ConnectionStatus: NetConnection.Connect.Failed"] On Thu, Nov 9, 2017 at 10:30 AM, Maxim Solodovnik <[email protected]<mailto:[email protected]>> wrote: You can try to turn-on client debugging and check browser console ... On Thu, Nov 9, 2017 at 10:29 PM, Maxim Solodovnik <[email protected]<mailto:[email protected]>> wrote: Massages from openmeetings.log are just DEBUG messages, nothing to worry about Have you saved the Camera/Mic settings in Settings dialog? I don't know what can be wrong since everything works on demo ... On Thu, Nov 9, 2017 at 9:06 PM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: Adobe Flash in Firefox somethings will crash in the step. On Thu, Nov 9, 2017 at 8:35 AM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: In the choose device window, it will ask for camera permission. On Thu, Nov 9, 2017 at 8:33 AM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: In the demo website, after I enter a public room, the browser will ask for the camera permission, however, in my website, the browser does not ask. This means the browser does not want to use camera. I don't know why. On Thu, Nov 9, 2017 at 8:24 AM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: I checked my openmeetings.log. I do see an error message: DEBUG 11-09 08:16:21.272 o.a.o.c.r.ScopeApplicationAdapter:767 [Thread-57] - [MessageSender] -> 'Unable to send message to NULL scope' clientUpdated, null DEBUG 11-09 08:16:21.297 o.a.o.d.d.r.PollDao:103 [0.0-5443-exec-3] - :: hasPoll :: 4 DEBUG 11-09 08:16:21.300 o.a.o.d.d.r.PollDao:97 [0.0-5443-exec-3] - :: getArchived :: 4 DEBUG 11-09 08:16:32.706 o.a.o.w.c.MainPanel:117 [0.0-5443-exec-9] - Sending WebSocket PING DEBUG 11-09 08:16:39.925 o.a.o.w.a.Application:619 [0.0-5443-exec-8] - Removing online room client: 8ad9cbcb-7ebc-4822-a8fb-c590c152448d, room: 4 DEBUG 11-09 08:16:39.932 o.a.o.c.r.ScopeApplicationAdapter:767 [Thread-58] - [MessageSender] -> 'Unable to send message to NULL scope' stopStream, java.lang.Object@4fa3b9c5<mailto:java.lang.Object@4fa3b9c5> Is this related to my problem? On Thu, Nov 9, 2017 at 8:12 AM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: Hi, Maxim, I also thought I just need to set the Camera/Microphone once and it will automatically start. This is the case in OM3.3. However, in OM4.0, this does not work. I can see the video in the settings, but I cannot see the video after that. Please see the attached image. I really don't know why. It is so strange. The port issue is solved. So, I know the port does not cause this problem. Do you know why? Thanks, Tom On Thu, Nov 9, 2017 at 2:54 AM, Maxim Solodovnik <[email protected]<mailto:[email protected]>> wrote: Hello Tom, I'm answering emails as soon as I got free time, you shouldn't expect immediate answer :)) Camera/Microphone will be started automatically as soon as you will set it up once So open the settings, choose correct devises, press Save According to port availability you need to check detailed results: push small "Copy" button on the right, Paste result to some text file and check what is wrong On Thu, Nov 9, 2017 at 2:40 AM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: Another issue is that when I do port testing using the tool on the login page. The port testing always fails even thought I opened all ports in my server. Do you know why? Is this issue related to the camera issue? Thanks, Tom On Wed, Nov 8, 2017 at 2:38 PM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: Right now, I can see my video if I click "choose device". However, I still cannot see the video in my camera in the public conference. The demo website does not have this problem. So, I know it must be some settings in my side. Any idea how to solve this issue? Thanks, Tom On Wed, Nov 8, 2017 at 1:12 PM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: Ok. I fixed the problem. Now I can connect using https. I will explain to you how I fixed the problem later. However, after I enter a public room, it seems my camera is not working. I remember in OM3.3. The camera automatically starts. Is there a button I need to press in OM4.0 to start my camera? Thanks, Tom On Wed, Nov 8, 2017 at 12:45 PM, Maxim Solodovnik <[email protected]<mailto:[email protected]>> wrote: I'm referring these instructions: http://openmeetings.apache.org/RTMPSAndHTTPS.html Unfortunately I have no time to check everything .... On Thu, Nov 9, 2017 at 12:29 AM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: Now there are some logs in red5.log 2017-11-08 17:26:39,998 [NioProcessor-11] INFO o.r.s.net.rtmp.RTMPMinaConnection - Connection is closed: WNZC8FWV7N3VL 2017-11-08 17:26:39,998 [NioProcessor-11] WARN o.r.s.net.rtmp.RTMPMinaIoHandler - Connection was not found for WNZC8FWV7N3VL 2017-11-08 17:26:40,007 [RTMPConnectionScheduler-5] WARN o.r.server.net.rtmp.RTMPConnection - Closing O4WODAWEPAMAT, due to long handshake. State: connect 2017-11-08 17:26:40,007 [NioProcessor-12] INFO o.r.s.net.rtmp.RTMPMinaConnection - Connection is closed: O4WODAWEPAMAT 2017-11-08 17:26:40,007 [NioProcessor-12] WARN o.r.s.net.rtmp.RTMPMinaIoHandler - Connection was not found for O4WODAWEPAMAT On Wed, Nov 8, 2017 at 12:22 PM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: http://openmeetings.markmail.org/message/j4gx2q6woidyqj7l?q=letsencrypt This is the instruction I followed. I performed step 1-8. Just skipped step 7 as you said. I don't feel I miss any step. On Wed, Nov 8, 2017 at 12:20 PM, Maxim Solodovnik <[email protected]<mailto:[email protected]>> wrote: Unfortunately not Maybe you miss some steps from the instructions? On Thu, Nov 9, 2017 at 12:17 AM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: Yes. I did SSL for the web interface and Set up Native RTMPS. It still does not work. Nothing is listening at port 5443. Do you have any other ideas why? Thanks, Tom On Wed, Nov 8, 2017 at 11:30 AM, Maxim Solodovnik <[email protected]<mailto:[email protected]>> wrote: Have you performed these: http://openmeetings.apache.org/RTMPSAndHTTPS.html#SSL_for_the_web_interface steps? On Wed, Nov 8, 2017 at 11:14 PM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: I cleared my old log and restarted the red5. Here is my red5.log: 2017-11-08 11:04:47,270 [main] INFO org.red5.server.Launcher - Red5 Server 1.0.10 (https://github.com/Red5) 2017-11-08 11:04:47,338 [main] INFO o.s.c.s.FileSystemXmlApplicationContext - Refreshing org.springframework.context.su<http://org.springframework.context.su>pport.FileSystemXmlApplicationContext@5f2050f6: startup date [Wed Nov 08 11:04:47 EST 2017]; root of context hierarchy 2017-11-08 11:04:47,393 [main] INFO o.s.b.f.xml.XmlBeanDefinitionReader - Loading XML bean definitions from class path resource [red5.xml] 2017-11-08 11:04:47,572 [main] INFO o.s.b.f.xml.XmlBeanDefinitionReader - Loading XML bean definitions from class path resource [jee-container.xml] Right now, I can still use http at port 5080 to access OM4.0; however https still does not work. Do I need to check other places? Thanks, Tom On Wed, Nov 8, 2017 at 10:55 AM, Maxim Solodovnik <[email protected]<mailto:[email protected]>> wrote: please check red5.log. Red5 reports what ports it is listening Ports are configured in red5.properties HTTP vs HTTPS is being configured in jee*.xml All other configuration values are in Admin->Config On Wed, Nov 8, 2017 at 10:53 PM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: Is there a similar configuration file like webapps/openmeetings/public/config.xml in OM4.0? Thanks, Tom On Wed, Nov 8, 2017 at 10:52 AM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: Hi, Maxim, I checked the more up-to-date instructions you sent. It still lists step 7: webapps/openmeetings/public/config.xml| I understand you said this step is not necessary. However, I tried to access mydoamin:5443/openmeetings. I just see an inaccessible error. More important, I tried sudo netstat -plnt, but nothing is listening at port 5443. Of course, I started the red5 server. Do you know why? Thanks, Tom On Wed, Nov 8, 2017 at 1:52 AM, Maxim Solodovnik <[email protected]<mailto:[email protected]>> wrote: This is email from 2016 It is not necessary to modify config.xml anymore These parameters are redundant since 4.0.0 <protocol>https</protocol> <red5httpport>5443</red5httpport> <rtmpsslport>5443</rtmpsslport> These can be set via Admin->Config <useSSL>yes</useSSL> <proxyType>none</proxyType> Here is the thread with more up-to-date instructions: http://markmail.org/message/ik4qdhdychl364bp (I haven't check them ... ) On Wed, Nov 8, 2017 at 1:33 PM, Tom Luo <[email protected]<mailto:[email protected]>> wrote: Hi, all, In the email: http://openmeetings.markmail.org/message/hqwjnihcfb4tqxkx?q=letsencrypt It said we need to modify Edit ../webapps/openmeetings/public/config.xml and set <protocol>https</protocol> <red5httpport>5443</red5httpport> <rtmpsslport>5443</rtmpsslport> <useSSL>yes</useSSL> <proxyType>none</proxyType> However, in OM4.0, I cannot find the config.xml file. So, which file should I modify? Thanks, Tom -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax
