with 5.3 "localhost" is local, not the wildcard address. you may need to use the wildcard address "0.0.0.0" if you localhost is tied to a different interface.
2009/9/9 magellings <mark.gelli...@qg.com> > > Okay I have 5.3 configured with the following config. I can't connect from > another machine through the host name of the server however. This config > is > taken directly from an ActiveMQ 5.2 broker and running that broker I can > connect just fine. Anyone know what's up? > > <!-- > Licensed to the Apache Software Foundation (ASF) under one or more > contributor license agreements. See the NOTICE file distributed with > this work for additional information regarding copyright ownership. > The ASF licenses this file to You under the Apache License, Version 2.0 > (the "License"); you may not use this file except in compliance with > the License. You may obtain a copy of the License at > > http://www.apache.org/licenses/LICENSE-2.0 > > Unless required by applicable law or agreed to in writing, software > distributed under the License is distributed on an "AS IS" BASIS, > WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. > See the License for the specific language governing permissions and > limitations under the License. > --> > > <beans > xmlns="http://www.springframework.org/schema/beans"; > xmlns:amq="http://activemq.apache.org/schema/core"; > xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"; > xsi:schemaLocation="http://www.springframework.org/schema/beans > http://www.springframework.org/schema/beans/spring-beans-2.0.xsd > http://activemq.apache.org/schema/core > http://activemq.apache.org/schema/core/activemq-core.xsd > http://activemq.apache.org/camel/schema/spring > http://activemq.apache.org/camel/schema/spring/camel-spring.xsd";> > > <!-- Allows us to use system properties as variables in this configuration > file --> > <bean > > class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer"> > <property name="locations"> > <value>file:///${activemq.base}/conf/credentials.properties</value> > </property> > </bean> > > <broker xmlns="http://activemq.apache.org/schema/core"; > brokerName="WAMQDEV1PRODUCTREQUEST" dataDirectory="${activemq.base}/data"> > > <plugins> > <simpleAuthenticationPlugin> > <users> > <authenticationUser username="GL$ACTIVEMQ_PRODUCTREQUEST" > password="replenish" groups="producers,consumers,admins" /> > </users> > </simpleAuthenticationPlugin> > <authorizationPlugin> > <map> > <authorizationMap> > <authorizationEntries> > <authorizationEntry queue=">" write="producers" > read="consumers" admin="admins,producers" /> > <authorizationEntry topic=">" read="admins" > write="admins,producers" admin="admins,producers,consumers" /> > </authorizationEntries> > </authorizationMap> > </map> > </authorizationPlugin> > </plugins> > > > <!-- Destination specific policies using destination names or wildcards > --> > <destinationPolicy> > <policyMap> > <policyEntries> > <policyEntry queue=">" useCache="true" memoryLimit="5mb"/> > <policyEntry topic=">" advisoryForSlowConsumers="true" > advisdoryForFastProducers="true" advisoryWhenFull="true" > memoryLimit="5mb"/> > </policyEntries> > </policyMap> > </destinationPolicy> > > <!-- Use the following to configure how ActiveMQ is exposed in JMX --> > <managementContext> > <managementContext createConnector="false"/> > </managementContext> > > <persistenceAdapter> > <amqPersistenceAdapter syncOnWrite="false" > directory="${activemq.base}/data" maxFileLength="20 mb"/> > </persistenceAdapter> > > <persistenceAdapter> > <jdbcPersistenceAdapter dataSource="#mssql-ds" > createTablesOnStartup="false" /> > </persistenceAdapter> > > <sslContext> > <sslContext keyStore="file:${activemq.base}/conf/broker.ks" > keyStorePassword="password" > trustStore="file:${activemq.base}/conf/broker.ts" > trustStorePassword="password"/> > </sslContext> > > <!-- The maximum about of space the broker will use before slowing down > producers --> > <systemUsage> > <systemUsage> > <memoryUsage> > <memoryUsage limit="20 mb"/> > </memoryUsage> > <storeUsage> > <storeUsage limit="1 gb" name="foo"/> > </storeUsage> > <tempUsage> > <tempUsage limit="100 mb"/> > </tempUsage> > </systemUsage> > </systemUsage> > > <!-- The transport connectors ActiveMQ will listen to --> > <transportConnectors> > <transportConnector name="openwire" uri="tcp://localhost:10198" > discoveryUri="multicast://default"/> > </transportConnectors> > > </broker> > > <bean id="mssql-ds" class="com.mchange.v2.c3p0.ComboPooledDataSource" > destroy-method="close"> > <property name="driverClass" > value="com.microsoft.sqlserver.jdbc.SQLServerDriver"/> > <property name="jdbcUrl" > value="jdbc:sqlserver://CHALLENGER.qg.com:1433 > ;databaseName=ActiveMQProductRequest;user=GL$ACTIVEMQ_PRODUCTREQUEST;password=replenish"/> > <property name="user" value="GL$ACTIVEMQ_PRODUCTREQUEST"/> > <property name="password" value="replenish"/> > <property name="acquireRetryAttempts" value="100"/> > <property name="testConnectionOnCheckout" value="true"/> > <property name="testConnectionOnCheckin" value="true"/> > <property name="automaticTestTable" value="ACTIVEMQ_CONN_TEST"/> > <property name="acquireRetryDelay" value="5000"/> > <property name="preferredTestQuery" value="SELECT 1"/> > </bean> > > <jetty xmlns="http://mortbay.com/schemas/jetty/1.0";> > <connectors> > <nioConnector port="10199"/> > </connectors> > > <handlers> > <webAppContext contextPath="/admin" > resourceBase="${activemq.base}/webapps/admin" logUrlOnStart="true"/> > <webAppContext contextPath="/camel" > resourceBase="${activemq.base}/webapps/camel" logUrlOnStart="true"/> > <webAppContext contextPath="/demo" > resourceBase="${activemq.base}/webapps/demo" logUrlOnStart="true"/> > <webAppContext contextPath="/fileserver" > resourceBase="${activemq.base}/webapps/fileserver" logUrlOnStart="true"/> > </handlers> > </jetty> > > </beans> > > > > > > > > > > > > rajdavies wrote: > > > > We are aiming to get a 5.3 release candidate to vote on next week - so > > no long > > On 4 Sep 2009, at 19:46, magellings wrote: > > > >> > >> Right now we're focusing pretty hard on stress testing version 5.2 > >> but we can > >> try and fit in a test. When is the estimated release date of > >> version 5.3? > >> In other words, how much time do we have? :) > >> > >> > >> rajdavies wrote: > >>> > >>> > >>> On 4 Sep 2009, at 15:14, magellings wrote: > >>> > >>>> > >>>> We too were having problems were number of pending of messages was a > >>>> negative > >>>> number and messages received was greater than number sent. We > >>>> determined > >>>> there were indeed duplicate messages being sent. > >>>> > >>>> We ended up setting useCache to false on the queue policy entry and > >>>> the > >>>> problem appears to be resolved. > >>>> > >>>> We too were sending a high volume of messages to our queues > >>>> relatively > >>>> quickly. > >>>> -- > >>>> View this message in context: > >>>> > http://www.nabble.com/Getting-negative-number-of-pending-messages-tp22106707p25295148.html > >>>> Sent from the ActiveMQ - User mailing list archive at Nabble.com. > >>>> > >>> > >>> > >>> It would be great to know if you still had the problem on the latest > >>> 5.3 snapshot too > >>> > >>> cheers, > >>> > >>> Rob > >>> > >>> Rob Davies > >>> I work here: http://fusesource.com > >>> My Blog: http://rajdavies.blogspot.com/ > >>> I'm writing this: http://www.manning.com/snyder/ > >>> > >>> > >>> > >>> > >>> > >>> > >> > >> -- > >> View this message in context: > >> > http://www.nabble.com/Getting-negative-number-of-pending-messages-tp22106707p25299721.html > >> Sent from the ActiveMQ - User mailing list archive at Nabble.com. > >> > > > > Rob Davies > > I work here: http://fusesource.com > > My Blog: http://rajdavies.blogspot.com/ > > I'm writing this: http://www.manning.com/snyder/ > > > > > > > > > > > > > > -- > View this message in context: > http://www.nabble.com/Getting-negative-number-of-pending-messages-tp22106707p25369349.html > Sent from the ActiveMQ - User mailing list archive at Nabble.com. > > -- http://blog.garytully.com Open Source Integration http://fusesource.com
