Hello,
I also have this problem since last weekend, I do not very think that
I have changed much how to setup the cloud management.
Too worse that there is no logs left on my server.
[root@localhost x86_64]# tail -n 200
/var/log/cloud/management/management-server.log
tail: cannot open `/var/log/cloud/management/management-server.log'
for reading: No such file or directory
What's have changed? I have try on CentOS 6.4 X86_64 and CS 4.02.
For other logs.
Only
[root@localhost x86_64]# tail /var/log/cloud/setupManagement.log
DEBUG:root:execute:service cloud-management status
DEBUG:root:Failed to execute:cloud-management is stopped
The pid file locates at /var/run/cloud-management.pid and lock file at
/var/lock/subsys/cloud-management.
Starting cloud-management will take care of them or you can
manually clean up.
DEBUG:root:execute:chkconfig --level 2345 cloud-management on
DEBUG:root:execute:service cloud-management status
DEBUG:root:Failed to execute:cloud-management is stopped
The pid file locates at /var/run/cloud-management.pid and lock file at
/var/lock/subsys/cloud-management.
Starting cloud-management will take care of them or you can
manually clean up.
DEBUG:root:execute:service cloud-management start
[root@localhost x86_64]#
And
[root@localhost x86_64]# cat /var/log/cloud/management/catalina.out
/usr/sbin/tomcat6: line 30:
/usr/share/cloud/management/logs/catalina.out: Permission denied
/usr/sbin/tomcat6: line 30:
/usr/share/cloud/management/logs/catalina.out: Permission denied
/usr/sbin/tomcat6: line 30:
/usr/share/cloud/management/logs/catalina.out: Permission denied
/usr/sbin/tomcat6: line 30:
/usr/share/cloud/management/logs/catalina.out: Permission denied
Should be the Permission problem?
Thanks
On Fri, May 31, 2013 at 11:37 PM, <josee...@farmaenlace.com> wrote:
> I run that command and it returns the following:
>
> ===============
> cloud-management interrupted but a pid file exists
> The pid file locates at /var/run/cloud-management.pid and lock file at
> /var/lock/subsys/cloud-management.
> Starting cloud-management will take care of them or you can
> manually clean up.
> ===========
>
> On /etc/hosts I got:
> 127.0.0.1 localhost localhost.localdomain localhost4
> localhost4.localdomain4
> ::1 localhost localhost.localdomain localhost6
> localhost6.localdomain6
> #127.0.0.1 ServerManagement.xdomain.com
> ServerManagement.localhost.localdomain localhost
> 192.168.238.40 ServerManagement.xdomain.com ServerManagement
>
> On /etc/network I got:
> NETWORKING=yes
> HOSTNAME=ServerManagement.xdomain.com
>
> Let me know if something is wrong in those files.
>
>> Try to run
>>
>> service cloud-management status
>>
>> -Oded
>>
>> -----Original Message-----
>> From: Pranav Saxena [mailto:pranav.sax...@citrix.com]
>> Sent: Friday, May 31, 2013 4:55 PM
>> To: users@cloudstack.apache.org
>> Cc: rogelio.fiorenz...@gmail.com; josee...@farmaenlace.com
>> Subject: RE: Unable to display UI
>>
>> Guys , can you check your management server logs and see if there is any
>> exception being thrown ?
>>
>> Also can you try the following -
>>
>> Try editing the HOSTNAME in the file "/etc/sysconfig/network" apart from
>> the file "/etc/hosts"
>> For example
>> /etc/hosts:
>> 192.168.1.1 xxxxx
>>
>> /etc/sysconfig/network:
>> Hostname= xxxxx
>>
>> Thanks,
>> Pranav
>>
>> -----Original Message-----
>> From: Rogelio Fiorenzano [mailto:rogelio.fiorenz...@gmail.com]
>> Sent: Friday, May 31, 2013 8:19 PM
>> To: users@cloudstack.apache.org
>> Subject: Re: Unable to display UI
>>
>> Jose--
>>
>> I'm avidly waiting to see the responses that come to you because I'm
>> experiencing the very same issue. I've gone through the "Quick
>> Installation Guide" about 10 times from beginning to end re-confirming
>> that every step was followed.
>>
>> My setup is slightly different than the "QIG" in that I changed the
>> private IP address to a 192.168.1.0/24 network as opposed to the
>> 172.16.10.0/24network in the document.
>>
>> I do not believe that there should be an issue with that as long as all
>> the necessary steps are followed.
>>
>> Looking forward to see what help we can get.
>>
>> RF
>>
>>
>>
>>
>> On Fri, May 31, 2013 at 10:38 AM, José Egas López
>> <josee...@farmaenlace.com>wrote:
>>
>>> Hi,
>>>
>>> I finished the installation of CS 400, when I try to run the UI on a
>>> browser the common error "Firefox can't establish a connection to the
>>> server" is displayed.
>>> Is something missing on my installation?
>>> I did all steps from the CS Install Guide.
>>> --
>>> *Jóse*
>>>
>>> ##############################**######################
>>> FARMAENLACE ha procesado su mensaje y esta limpio No imprima este mail
>>> a menos que sea necesario
>>>
>>>
>>
>> ####################################################
>> FARMAENLACE ha procesado su mensaje y esta limpio
>> No imprima este mail a menos que sea necesario
>>
>>
>
>
> ####################################################
> FARMAENLACE ha procesado su mensaje y esta limpio
> No imprima este mail a menos que sea necesario
>
