Okay, I have tried this
chmod 777 /usr/share/cloud/management/logs/catalina.out Seems it helps to get the tomcat to run. but the command not need before, I think at lease last week, I have never run this command to change the permission and have succeeded to set-up the management without any problem. Or I have miss something? Thank you. On Sat, Jun 1, 2013 at 1:17 AM, wq meng <wqm...@gmail.com> wrote: > Hello, > > I also have this problem since last weekend, I do not very think that > I have changed much how to setup the cloud management. > > Too worse that there is no logs left on my server. > > [root@localhost x86_64]# tail -n 200 > /var/log/cloud/management/management-server.log > tail: cannot open `/var/log/cloud/management/management-server.log' > for reading: No such file or directory > > What's have changed? I have try on CentOS 6.4 X86_64 and CS 4.02. > > > For other logs. > Only > > [root@localhost x86_64]# tail /var/log/cloud/setupManagement.log > DEBUG:root:execute:service cloud-management status > DEBUG:root:Failed to execute:cloud-management is stopped > The pid file locates at /var/run/cloud-management.pid and lock file at > /var/lock/subsys/cloud-management. > Starting cloud-management will take care of them or you can > manually clean up. > DEBUG:root:execute:chkconfig --level 2345 cloud-management on > DEBUG:root:execute:service cloud-management status > DEBUG:root:Failed to execute:cloud-management is stopped > The pid file locates at /var/run/cloud-management.pid and lock file at > /var/lock/subsys/cloud-management. > Starting cloud-management will take care of them or you can > manually clean up. > DEBUG:root:execute:service cloud-management start > [root@localhost x86_64]# > > > And > > > [root@localhost x86_64]# cat /var/log/cloud/management/catalina.out > /usr/sbin/tomcat6: line 30: > /usr/share/cloud/management/logs/catalina.out: Permission denied > /usr/sbin/tomcat6: line 30: > /usr/share/cloud/management/logs/catalina.out: Permission denied > /usr/sbin/tomcat6: line 30: > /usr/share/cloud/management/logs/catalina.out: Permission denied > /usr/sbin/tomcat6: line 30: > /usr/share/cloud/management/logs/catalina.out: Permission denied > > > > > Should be the Permission problem? > > Thanks > > On Fri, May 31, 2013 at 11:37 PM, <josee...@farmaenlace.com> wrote: >> I run that command and it returns the following: >> >> =============== >> cloud-management interrupted but a pid file exists >> The pid file locates at /var/run/cloud-management.pid and lock file at >> /var/lock/subsys/cloud-management. >> Starting cloud-management will take care of them or you can >> manually clean up. >> =========== >> >> On /etc/hosts I got: >> 127.0.0.1 localhost localhost.localdomain localhost4 >> localhost4.localdomain4 >> ::1 localhost localhost.localdomain localhost6 >> localhost6.localdomain6 >> #127.0.0.1 ServerManagement.xdomain.com >> ServerManagement.localhost.localdomain localhost >> 192.168.238.40 ServerManagement.xdomain.com ServerManagement >> >> On /etc/network I got: >> NETWORKING=yes >> HOSTNAME=ServerManagement.xdomain.com >> >> Let me know if something is wrong in those files. >> >>> Try to run >>> >>> service cloud-management status >>> >>> -Oded >>> >>> -----Original Message----- >>> From: Pranav Saxena [mailto:pranav.sax...@citrix.com] >>> Sent: Friday, May 31, 2013 4:55 PM >>> To: users@cloudstack.apache.org >>> Cc: rogelio.fiorenz...@gmail.com; josee...@farmaenlace.com >>> Subject: RE: Unable to display UI >>> >>> Guys , can you check your management server logs and see if there is any >>> exception being thrown ? >>> >>> Also can you try the following - >>> >>> Try editing the HOSTNAME in the file "/etc/sysconfig/network" apart from >>> the file "/etc/hosts" >>> For example >>> /etc/hosts: >>> 192.168.1.1 xxxxx >>> >>> /etc/sysconfig/network: >>> Hostname= xxxxx >>> >>> Thanks, >>> Pranav >>> >>> -----Original Message----- >>> From: Rogelio Fiorenzano [mailto:rogelio.fiorenz...@gmail.com] >>> Sent: Friday, May 31, 2013 8:19 PM >>> To: users@cloudstack.apache.org >>> Subject: Re: Unable to display UI >>> >>> Jose-- >>> >>> I'm avidly waiting to see the responses that come to you because I'm >>> experiencing the very same issue. I've gone through the "Quick >>> Installation Guide" about 10 times from beginning to end re-confirming >>> that every step was followed. >>> >>> My setup is slightly different than the "QIG" in that I changed the >>> private IP address to a 192.168.1.0/24 network as opposed to the >>> 172.16.10.0/24network in the document. >>> >>> I do not believe that there should be an issue with that as long as all >>> the necessary steps are followed. >>> >>> Looking forward to see what help we can get. >>> >>> RF >>> >>> >>> >>> >>> On Fri, May 31, 2013 at 10:38 AM, José Egas López >>> <josee...@farmaenlace.com>wrote: >>> >>>> Hi, >>>> >>>> I finished the installation of CS 400, when I try to run the UI on a >>>> browser the common error "Firefox can't establish a connection to the >>>> server" is displayed. >>>> Is something missing on my installation? >>>> I did all steps from the CS Install Guide. >>>> -- >>>> *Jóse* >>>> >>>> ##############################**###################### >>>> FARMAENLACE ha procesado su mensaje y esta limpio No imprima este mail >>>> a menos que sea necesario >>>> >>>> >>> >>> #################################################### >>> FARMAENLACE ha procesado su mensaje y esta limpio >>> No imprima este mail a menos que sea necesario >>> >>> >> >> >> #################################################### >> FARMAENLACE ha procesado su mensaje y esta limpio >> No imprima este mail a menos que sea necesario >>
