Check in cloudstack management server mysql database .
Thanks, Jayapal > -----Original Message----- > From: wq meng [mailto:wqm...@gmail.com] > Sent: Tuesday, 11 June 2013 5:10 PM > To: users@cloudstack.apache.org > Subject: Re: allow outbound access by default on virtual routers > > Hello Jayapal, > > > Where is the nics tables, is it inside the router? Or in the CloudStack > configuration? > > > Thank you very much. > > > On Tue, Jun 11, 2013 at 7:11 PM, Jayapal Reddy Uradi < > jayapalreddy.ur...@citrix.com> wrote: > > > Hi, > > > > cmdline is having the correct config for eth2. > > But router received command with interface eth3 instead of eth2, some > > thing is wrong here. > > > > Please see what is device_id for the nic with the public ip in 'nics' > > table. > > > > One possibility can be hypervisor might returning wrong device id for > > the public interface. > > > > Thanks, > > Jayapal > > > > > > On 11-Jun-2013, at 4:12 PM, wq meng <wqm...@gmail.com> > > wrote: > > > > > Hello, > > > > > > Here is the cmdline file and the logs from message file, there is > > something > > > tell that cloud setup eth3 with rules. > > > > > > http://pastebin.com/4WvpukKW > > > > > > > > > Thank you very much. > > > > > > > > > On Tue, Jun 11, 2013 at 6:11 PM, wq meng <wqm...@gmail.com> wrote: > > > > > >> Should be there is something not work as expected when some > > >> situation, with this script ? > > >> > > >> /etc/init.d/cloud-early-config > > >> > > >> > > >> Thank you very much. > > >> > > >> On Tue, Jun 11, 2013 at 5:59 PM, wq meng <wqm...@gmail.com> > wrote: > > >> > > >>> Not sure why, is there a solution? > > >>> > > >>> Here is the new result, after create a new V-router. > > >>> > > >>> This time, the eth4 is disappear . But eth3 still there. > > >>> > > >>> Why??? > > >>> > > >>> http://pastebin.com/G0NjNCuA > > >>> > > >>> > > >>> Thank you very much. > > >>> > > >>> > > >>> On Tue, Jun 11, 2013 at 5:49 PM, Jayapal Reddy Uradi < > > >>> jayapalreddy.ur...@citrix.com> wrote: > > >>> > > >>>> * packets are going out WITHOUT NAT and in reply the packets are > > >>>> not reaching private ip address. > > >>>> > > >>>> Thanks > > >>>> Jayapal > > >>>> > > >>>> On 11-Jun-2013, at 2:56 PM, Jayapal Reddy Uradi < > > >>>> jayapalreddy.ur...@citrix.com> > > >>>> wrote: > > >>>> > > >>>>> Hi, > > >>>>> > > >>>>> If you observe in your router there 3 public interfaces with the > > >>>>> same > > >>>> IP address. > > >>>>> The outbound/egress traffic is passing from eth0 to eth2. > > >>>>> > > >>>>> The iptables nat SNAT rule is not there on the eth2, but the > > >>>>> rules > > >>>> are on the eth3 and eth4 interface. > > >>>>> So the packets are going out without NAT and in reply the > > >>>>> packets are > > >>>> not reaching back. > > >>>>> > > >>>>> So please check why you router has multiple SNAT ip addresses. > > >>>>> Try destroying router and see the router is coming up one public > > >>>> interface eth2 or not. > > >>>>> > > >>>>> 1. Interfaces with same ip address > > >>>>> > > >>>>> 1. > > >>>>> eth2 Link encap:Ethernet HWaddr 06:74:78:00:00:a2 > > >>>>> 2. > > >>>>> inet addr:198.105.191.145 Bcast:198.105.191.255 > > >>>> Mask:255.255.255.0 > > >>>>> 3. > > >>>>> 4. > > >>>>> 5. > > >>>>> eth3 Link encap:Ethernet HWaddr 06:6f:64:00:00:a2 > > >>>>> 6. > > >>>>> inet addr:198.105.191.145 Bcast:198.105.191.255 > > >>>> Mask:255.255.255.0 > > >>>>> 7. > > >>>>> 8. > > >>>>> 9. > > >>>>> eth4 Link encap:Ethernet HWaddr 06:1e:c4:00:00:a2 > > >>>>> 10. > > >>>>> inet addr:198.105.191.145 Bcast:198.105.191.255 > > >>>> Mask:255.255.255.0 > > >>>>> 11. > > >>>>> 12. > > >>>>> > > >>>>> 2. Here traffic is accepted on eth0 to eth2 (179 packets) > > >>>>> 179 15036 FW_OUTBOUND all -- eth0 eth2 0.0.0.0/0 > > >>>> 0.0.0.0/0 > > >>>>> > > >>>>> 3. In iptables nat table doesn't have the SNAT rule to nat the > > traffic. > > >>>>> > > >>>>> 1. > > >>>>> Chain POSTROUTING (policy ACCEPT 5 packets, 616 bytes) 2. > > >>>>> pkts bytes target prot opt in out source > > >>>> destination > > >>>>> 3. > > >>>>> 0 0 SNAT all -- * eth3 0.0.0.0/0 > > >>>> 0.0.0.0/0 to:198.105.191.145 > > >>>>> 4. > > >>>>> 0 0 SNAT all -- * eth4 0.0.0.0/0 > > >>>> 0.0.0.0/0 to:198.105.191.145 > > >>>>> 5. > > >>>>> > > >>>>> > > >>>>> > > >>>>> Thanks, > > >>>>> Jayapal > > >>>>> > > >>>>> On 10-Jun-2013, at 11:16 PM, wq meng > <wqm...@gmail.com<mailto: > > >>>> wqm...@gmail.com>> wrote: > > >>>>> > > >>>>> Hello Jayapal, > > >>>>> > > >>>>> Setup details is that only 1 PC, with 1 network interface. eth1. > > >>>>> > > >>>>> I add br0 to eth1, and br0:0 to eth1. br0 work as KVM tag for mgmt. > > >>>>> add eth1.1200 as the public VLan, 1200 is public vlan tag, add > > >>>>> eth1.1300 as the guest Vlan, 1300 is the guest vlan tag. > > >>>>> add cloudVirBr1200 to eth1.1200, KVM tag for* public* is > > >>>> cloudVirBr1200 > > >>>>> add cloudVirBr1300 to eth1.1300, KVM tag for private is > > cloudVirBr1300 > > >>>>> > > >>>>> Here is the IP ranges. > > >>>>> http://pastebin.com/uZBpx0Lr > > >>>>> > > >>>>> Here is how the NIC and bridges configuration on the Computer. > > >>>>> http://pastebin.com/86jRex72 > > >>>>> > > >>>>> Here is the result from the v-router. > > >>>>> http://pastebin.com/dcDUuyP7 > > >>>>> > > >>>>> > > >>>>> Thank you very much. > > >>>>> > > >>>>> > > >>>>> On Mon, Jun 10, 2013 at 4:58 PM, Jayapal Reddy Uradi < > > >>>>> jayapalreddy.ur...@citrix.com> wrote: > > >>>>> > > >>>>> Hi, > > >>>>> > > >>>>> In advanced zone you can use openVswitch. > > >>>>> Please share setup details like hypervisor, public ip range. > > >>>>> > > >>>>> Did you deploy vm with default network offering ? > > >>>>> > > >>>>> Please share your below commands output on router via > > >>>>> pastebin.com Iptables -L -nv Iptables -t nat -L -nv Iptables -t > > >>>>> mangle -L -nv > > >>>>> > > >>>>> Ifconfig > > >>>>> > > >>>>> Lets figure out is there any problem in cloudstack configuration. > > >>>>> > > >>>>> Thanks, > > >>>>> Jayapal > > >>>>> -----Original Message----- > > >>>>> From: wq meng [mailto:wqm...@gmail.com] > > >>>>> Sent: Sunday, 9 June 2013 1:43 AM > > >>>>> To: users@cloudstack.apache.org > > >>>>> Subject: Re: allow outbound access by default on virtual routers > > >>>>> > > >>>>> Hello Jayapal, > > >>>>> > > >>>>> Seems the problem exist in CS4.1.0 too. > > >>>>> > > >>>>> And I have tried the same NAT rule, not work. > > >>>>> iptables -t nat -A POSTROUTING -s 10.1.1.0/24 -o eth2 -j SNAT > > >>>>> --to > > >>>>> xxx.105.191.147 > > >>>>> > > >>>>> > > >>>>> Should use OpenvSwich? Is the OpenvSwitch is recommend? > > >>>>> > > >>>>> > > >>>>> Thanks > > >>>>> > > >>>>> > > >>>>> On Sun, Jun 2, 2013 at 5:01 AM, wq meng <wqm...@gmail.com> > wrote: > > >>>>> > > >>>>> Hello Jayapal, > > >>>>> > > >>>>> I add a iptables rule > > >>>>> > > >>>>> iptables -t nat -A POSTROUTING -s 10.1.1.0/24 -o eth2 -j SNAT > > >>>>> --to > > >>>>> xxx.105.191.147 > > >>>>> > > >>>>> And it seems works now. I can ping Google inside the Guest VM. > > >>>>> > > >>>>> > > >>>>> Just a few questions, Why in my VR-VM, it have eth3, eth4? > > >>>>> Where are they come from, in the interface file, there is not > > configuration > > >>>>> for eth3 and eth4 at all. > > >>>>> > > >>>>> Sometimes, I reboot the VR-VM, the eth4 is disappear, only left > > >>>>> eth3, but as you can know, it still not work, As eth3 is not a NIC at > > >>>>> all. > > >>>>> > > >>>>> Then maybe the VR-VM have some buggy scripts when the VR-VM > > >>>>> start , and which mis-configuration the NICs and also the NAT > > >>>>> rules for VRouter? > > >>>>> > > >>>>> > > >>>>> As the CS4.1 will be release soon on Monday, I am not sure, if > > >>>>> it need spend more time to look deep. > > >>>>> > > >>>>> Thank you very much. > > >>>>> > > >>>>> > > >>>>> On Sat, Jun 1, 2013 at 6:38 PM, wq meng <wqm...@gmail.com> > wrote: > > >>>>> > > >>>>> Hello, > > >>>>> > > >>>>> Sorry for the delay, > > >>>>> > > >>>>> Here is the NAT table. Please check. > > >>>>> The xxx.105.191.147 IP is the public IP for the VRouter-VM. > > >>>>> > > >>>>> root@r-6-VM:~# iptables -t nat -L -nv Chain PREROUTING (policy > > ACCEPT > > >>>>> 258 packets, 13822 bytes) > > >>>>> pkts bytes target prot opt in out source > > >>>>> destination > > >>>>> > > >>>>> Chain POSTROUTING (policy ACCEPT 4 packets, 532 bytes) > > >>>>> pkts bytes target prot opt in out source > > >>>>> destination > > >>>>> 0 0 SNAT all -- * eth3 0.0.0.0/0 > > >>>>> 0.0.0.0/0 to:xxx.105.191.147 > > >>>>> 0 0 SNAT all -- * eth4 0.0.0.0/0 > > >>>>> 0.0.0.0/0 to:xxx.105.191.147 > > >>>>> > > >>>>> Chain OUTPUT (policy ACCEPT 3 packets, 448 bytes) > > >>>>> pkts bytes target prot opt in out source > > >>>>> destination > > >>>>> > > >>>>> root@r-6-VM:~# > > >>>>> > > >>>>> > > >>>>> Thanks a lot. > > >>>>> > > >>>>> > > >>>>> On Mon, May 27, 2013 at 1:09 PM, Jayapal Reddy Uradi < > > >>>>> jayapalreddy.ur...@citrix.com> wrote: > > >>>>> > > >>>>> From the packet captures on eth2, the vm IP seems to be not > NATed. > > >>>>> 13:39:41.991966 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 126, length 64 > > >>>>> > > >>>>> Can you also share iptables -t nat -L -nv output. > > >>>>> > > >>>>> Thanks, > > >>>>> Jayapal > > >>>>> > > >>>>> -----Original Message----- > > >>>>> From: wq meng [mailto:wqm...@gmail.com] > > >>>>> Sent: Friday, 24 May 2013 7:13 PM > > >>>>> To: users@cloudstack.apache.org > > >>>>> Subject: Re: allow outbound access by default on virtual routers > > >>>>> > > >>>>> Hello Jayapal > > >>>>> > > >>>>> > > >>>>> > > >>>>> > > >>>>> I ping google.com on the Guest VM, > > >>>>> > > >>>>> Here is the dump data from the router - VM. > > >>>>> > > >>>>> Please review. > > >>>>> > > >>>>> And the 2.*.2 is public IP, which I replace to the real ip. > > >>>>> > > >>>>> > > >>>>> Thank you very much. > > >>>>> > > >>>>> > > >>>>> > > >>>>> > > >>>>> root@r-7-VM:~# > > >>>>> root@r-7-VM:~# tcpdump -i eth0 -nq > > >>>>> tcpdump: verbose output suppressed, use -v or -vv for full > > >>>>> protocol decode listening on eth0, link-type EN10MB (Ethernet), > > >>>>> capture size 65535 bytes > > >>>>> 13:38:52.979198 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 77, length 64 > > >>>>> 13:38:53.979203 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 78, length 64 > > >>>>> 13:38:54.979205 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 79, length 64 > > >>>>> 13:38:55.978182 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 80, length 64 > > >>>>> 13:38:56.979188 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 81, length 64 > > >>>>> 13:38:57.979299 ARP, Request who-has 10.1.1.1 tell 10.1.1.4, > > >>>>> length 28 > > >>>>> 13:38:57.979307 ARP, Reply 10.1.1.1 is-at 02:00:00:b1:00:05, > > >>>>> length 28 > > >>>>> 13:38:57.979315 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 82, length 64 > > >>>>> 13:38:58.979250 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 83, length 64 > > >>>>> 13:38:59.979297 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 84, length 64 > > >>>>> 13:39:00.979313 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 85, length 64 > > >>>>> 13:39:01.978311 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 86, length 64 > > >>>>> 13:39:02.979282 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 87, length 64 > > >>>>> 13:39:03.979323 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 88, length 64 > > >>>>> 13:39:04.979315 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 89, length 64 > > >>>>> 13:39:05.979364 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 90, length 64 > > >>>>> 13:39:06.979420 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 91, length 64 > > >>>>> 13:39:07.978421 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 92, length 64 > > >>>>> 13:39:08.978432 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 93, length 64 > > >>>>> 13:39:09.979447 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 94, length 64 > > >>>>> 13:39:10.979437 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 95, length 64 > > >>>>> 13:39:11.979474 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 96, length 64 > > >>>>> 13:39:12.979473 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 97, length 64 > > >>>>> 13:39:13.978525 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 98, length 64 > > >>>>> 13:39:14.978535 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 99, length 64 > > >>>>> 13:39:15.979562 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 100, length 64 > > >>>>> 13:39:16.979575 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 101, length 64 > > >>>>> 13:39:17.979602 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 102, length 64 > > >>>>> 13:39:18.979584 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 103, length 64 > > >>>>> 13:39:19.988541 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 104, length 64 > > >>>>> 13:39:20.988615 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 105, length 64 > > >>>>> 13:39:21.988598 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 106, length 64 > > >>>>> 13:39:22.989582 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 107, length 64 > > >>>>> 13:39:23.989666 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 108, length 64 > > >>>>> 13:39:24.989695 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 109, length 64 > > >>>>> 13:39:25.989725 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 110, length 64 ^C > > >>>>> 36 packets captured > > >>>>> 36 packets received by filter > > >>>>> 0 packets dropped by kernel > > >>>>> root@r-7-VM:~# tcpdump -i eth2 -nq > > >>>>> tcpdump: verbose output suppressed, use -v or -vv for full > > >>>>> protocol decode listening on eth2, link-type EN10MB (Ethernet), > > >>>>> capture size 65535 bytes > > >>>>> 13:39:38.380208 ARP, Request who-has 2.*.2.22 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:38.982570 STP 802.1d, Config, Flags [none], bridge-id > > >>>>> 8000.00:25:90:a4:98:3e.8004, length 35 > > >>>>> 13:39:38.987877 ARP, Request who-has 2.*.2.35 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:38.991937 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 123, length 64 > > >>>>> 13:39:39.194709 ARP, Request who-has 2.*.2.22 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:39.599296 ARP, Request who-has 2.*.2.35 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:39.904508 ARP, Request who-has 2.*.2.22 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:39.991931 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 124, length 64 > > >>>>> 13:39:40.417287 ARP, Request who-has 2.*.2.35 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:40.730305 ARP, Request who-has 2.*.2.22 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:40.982552 STP 802.1d, Config, Flags [none], bridge-id > > >>>>> 8000.00:25:90:a4:98:3e.8004, length 35 > > >>>>> 13:39:40.991980 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 125, length 64 > > >>>>> 13:39:41.337501 ARP, Request who-has 2.*.2.35 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:41.437224 ARP, Request who-has 2.*.2.22 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:41.991966 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 126, length 64 > > >>>>> 13:39:42.903756 ARP, Request who-has 2.*.2.248 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:39:42.982539 STP 802.1d, Config, Flags [none], bridge-id > > >>>>> 8000.00:25:90:a4:98:3e.8004, length 35 > > >>>>> 13:39:42.992996 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 127, length 64 > > >>>>> 13:39:43.682772 ARP, Request who-has 2.*.2.248 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:39:43.993009 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 128, length 64 > > >>>>> 13:39:44.502714 ARP, Request who-has 2.*.2.248 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:39:44.509679 ARP, Request who-has 2.*.2.228 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:39:44.585413 ARP, Request who-has 2.*.2.70 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:44.982554 STP 802.1d, Config, Flags [none], bridge-id > > >>>>> 8000.00:25:90:a4:98:3e.8004, length 35 > > >>>>> 13:39:44.993017 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 129, length 64 > > >>>>> 13:39:45.160097 ARP, Request who-has 2.*.2.53 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:45.215168 ARP, Request who-has 2.*.2.70 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:45.318277 ARP, Request who-has 2.*.2.228 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:39:45.325738 ARP, Request who-has 2.*.2.34 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:45.421375 ARP, Request who-has 2.*.2.248 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:39:45.826574 ARP, Request who-has 2.*.2.70 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:45.928821 ARP, Request who-has 2.*.2.228 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:39:45.930246 ARP, Request who-has 2.*.2.53 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:45.993039 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 130, length 64 > > >>>>> 13:39:46.030400 ARP, Request who-has 2.*.2.248 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:39:46.031609 ARP, Request who-has 2.*.2.34 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:46.349636 ARP, Request who-has 2.*.2.3 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:46.439927 ARP, Request who-has 2.*.2.70 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:46.486265 ARP, Request who-has 2.*.2.32 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:46.541822 ARP, Request who-has 2.*.2.228 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:39:46.850884 ARP, Request who-has 2.*.2.53 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:46.952230 ARP, Request who-has 2.*.2.34 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:46.982553 STP 802.1d, Config, Flags [none], bridge-id > > >>>>> 8000.00:25:90:a4:98:3e.8004, length 35 > > >>>>> 13:39:46.993050 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 131, length 64 > > >>>>> 13:39:47.051629 ARP, Request who-has 2.*.2.70 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:47.154197 ARP, Request who-has 2.*.2.228 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:39:47.155893 ARP, Request who-has 2.*.2.3 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:47.258228 ARP, Request who-has 2.*.2.32 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:47.459210 ARP, Request who-has 2.*.2.53 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:47.561218 ARP, Request who-has 2.*.2.34 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:47.970622 ARP, Request who-has 2.*.2.32 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:47.971612 ARP, Request who-has 2.*.2.3 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:47.993074 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 132, length 64 > > >>>>> 13:39:48.380271 ARP, Request who-has 2.*.2.34 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:48.381173 ARP, Request who-has 2.*.2.53 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:48.581498 ARP, Request who-has 2.*.2.32 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:48.890259 ARP, Request who-has 2.*.2.3 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:48.982519 STP 802.1d, Config, Flags [none], bridge-id > > >>>>> 8000.00:25:90:a4:98:3e.8004, length 35 > > >>>>> 13:39:48.994081 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 133, length 64 > > >>>>> 13:39:49.290934 ARP, Request who-has 2.*.2.42 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:49.302649 ARP, Request who-has 2.*.2.32 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:49.433752 ARP, Request who-has 2.*.2.116 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:39:49.812965 ARP, Request who-has 2.*.2.3 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:49.994099 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 134, length 64 > > >>>>> 13:39:50.014695 ARP, Request who-has 2.*.2.42 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:50.118276 ARP, Request who-has 2.*.2.116 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:39:50.933507 ARP, Request who-has 2.*.2.116 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:39:50.934227 ARP, Request who-has 2.*.2.42 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:50.982526 STP 802.1d, Config, Flags [none], bridge-id > > >>>>> 8000.00:25:90:a4:98:3e.8004, length 35 > > >>>>> 13:39:50.994092 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 135, length 64 > > >>>>> 13:39:51.643878 ARP, Request who-has 2.*.2.42 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:51.848044 ARP, Request who-has 2.*.2.116 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:39:51.994151 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 136, length 64 > > >>>>> 13:39:52.452001 ARP, Request who-has 2.*.2.116 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:39:52.453417 ARP, Request who-has 2.*.2.42 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:52.982496 STP 802.1d, Config, Flags [none], bridge-id > > >>>>> 8000.00:25:90:a4:98:3e.8004, length 35 > > >>>>> 13:39:52.994150 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 137, length 64 > > >>>>> 13:39:53.994171 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 138, length 64 > > >>>>> 13:39:54.982573 STP 802.1d, Config, Flags [none], bridge-id > > >>>>> 8000.00:25:90:a4:98:3e.8004, length 35 > > >>>>> 13:39:54.994188 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 139, length 64 > > >>>>> 13:39:55.995186 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 140, length 64 > > >>>>> 13:39:56.982561 STP 802.1d, Config, Flags [none], bridge-id > > >>>>> 8000.00:25:90:a4:98:3e.8004, length 35 > > >>>>> 13:39:56.995215 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 141, length 64 > > >>>>> 13:39:57.991661 ARP, Request who-has 2.*.2.1 tell 2.*.2.25, > > >>>>> length > > >>>>> 28 > > >>>>> 13:39:57.992092 ARP, Reply 2.*.2.1 is-at 5c:5e:ab:da:b9:c0, > > >>>>> length > > >>>>> 42 > > >>>>> 13:39:57.995220 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 142, length 64 > > >>>>> 13:39:58.982566 STP 802.1d, Config, Flags [none], bridge-id > > >>>>> 8000.00:25:90:a4:98:3e.8004, length 35 > > >>>>> 13:39:58.995244 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 143, length 64 > > >>>>> 13:39:59.995280 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 144, length 64 > > >>>>> 13:40:00.417613 ARP, Request who-has 2.*.2.4 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:40:00.982547 STP 802.1d, Config, Flags [none], bridge-id > > >>>>> 8000.00:25:90:a4:98:3e.8004, length 35 > > >>>>> 13:40:00.995274 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 145, length 64 > > >>>>> 13:40:01.170853 ARP, Request who-has 2.*.2.4 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:40:01.996303 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 146, length 64 > > >>>>> 13:40:02.074725 ARP, Request who-has 2.*.2.4 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:40:02.359140 ARP, Request who-has 2.*.2.161 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:40:02.982500 STP 802.1d, Config, Flags [none], bridge-id > > >>>>> 8000.00:25:90:a4:98:3e.8004, length 35 > > >>>>> 13:40:02.985123 ARP, Request who-has 2.*.2.4 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:40:02.996303 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 147, length 64 > > >>>>> 13:40:03.186378 ARP, Request who-has 2.*.2.161 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:40:03.417268 ARP, Request who-has 2.*.2.20 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:40:03.699414 ARP, Request who-has 2.*.2.4 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:40:03.996329 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 148, length 64 > > >>>>> 13:40:03.998677 ARP, Request who-has 2.*.2.161 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:40:04.301363 ARP, Request who-has 2.*.2.20 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:40:04.432828 ARP, Request who-has 2.*.2.115 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:40:04.435467 ARP, Request who-has 2.*.2.23 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:40:04.820262 ARP, Request who-has 2.*.2.161 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:40:04.920378 ARP, Request who-has 2.*.2.20 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:40:04.982690 STP 802.1d, Config, Flags [none], bridge-id > > >>>>> 8000.00:25:90:a4:98:3e.8004, length 35 > > >>>>> 13:40:04.996336 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, > > >>>>> id 56879, seq 149, length 64 > > >>>>> 13:40:05.124674 ARP, Request who-has 2.*.2.23 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:40:05.124678 ARP, Request who-has 2.*.2.115 tell 2.*.2.1, > > >>>>> length 42 > > >>>>> 13:40:05.399662 ARP, Request who-has 2.*.2.12 tell 2.*.2.1, > > >>>>> length > > >>>>> 42 > > >>>>> 13:40:05.429940 ARP, Request who-has 2.*.2.161 tell 2.*.2.1, > > >>>>> length 42 ^C > > >>>>> 115 packets captured > > >>>>> 115 packets received by filter > > >>>>> 0 packets dropped by kernel > > >>>>> root@r-7-VM:~# > > >>>>> > > >>>>> > > >>>>> On Fri, May 24, 2013 at 12:55 PM, Jayapal Reddy Uradi > > >>>>> <jayapalreddy.ur...@citrix.com> wrote: > > >>>>> Iptables rules are looking fine. > > >>>>> Can you please do the following. > > >>>>> 1. ping google.com from vm > > >>>>> 2. run the tcpdump command on the router eth0, eth2 and see the > > >>>>> packets are reaching to guest interface tcpdump -i eth0 -nq > > >>>>> tcpdump -i eth2 -nq > > >>>>> > > >>>>> If guest vm icmp packets are not reaching to eth0 and eth2 then > > >>>>> there is issue in your network setup. > > >>>>> > > >>>>> Thanks, > > >>>>> Jayapal > > >>>>> > > >>>>> > > >>>>> -----Original Message----- > > >>>>> From: wq meng [mailto:wqm...@gmail.com] > > >>>>> Sent: Friday, 24 May 2013 1:27 AM > > >>>>> To: users@cloudstack.apache.org > > >>>>> Subject: Re: allow outbound access by default on virtual routers > > >>>>> > > >>>>> Hello, > > >>>>> > > >>>>> Have you tried this and get this to work? > > >>>>> > > >>>>> I think I have the same problem just can not get the Guest VM to > > >>>>> access outbound by the V-router vm. > > >>>>> > > >>>>> my guest NIC is eth0, the public NIC is eth2. > > >>>>> > > >>>>> Here is the default rules in the Router VM. How to apply the > > >>>>> rules to get the Guest VM can access outbound? > > >>>>> > > >>>>> Could you help me to show how? I have tried many times, just > > >>>>> no > > >>>>> luck of > > >>>>> it. > > >>>>> > > >>>>> Thank you very much. > > >>>>> > > >>>>> > > >>>>> root@r-7-VM:~# cat /etc/iptables/rules > > >>>>> > > >>>>> > > >>>>> # Licensed to the Apache Software Foundation (ASF) under one # > > >>>>> or more contributor license agreements. See the NOTICE file # > > >>>>> distributed with this work for additional information # > > >>>>> regarding copyright ownership. The ASF licenses this file # to > > >>>>> you under the Apache License, Version 2.0 (the # "License"); you > > >>>>> may not use this file except in compliance # with the License. > > >>>>> You may obtain a copy of the License at # > > >>>>> # http://www.apache.org/licenses/LICENSE-2.0 > > >>>>> # > > >>>>> # Unless required by applicable law or agreed to in writing, # > > >>>>> software distributed under the License is distributed on an # > > >>>>> "AS IS" > > >>>>> BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY # KIND, > either > > >>>>> express or implied. > > >>>>> See the License for the # specific language governing > > >>>>> permissions and limitations # under the License. > > >>>>> > > >>>>> *nat > > >>>>> :PREROUTING ACCEPT [0:0] > > >>>>> :POSTROUTING ACCEPT [0:0] > > >>>>> :OUTPUT ACCEPT [0:0] > > >>>>> COMMIT > > >>>>> *filter > > >>>>> :INPUT DROP [0:0] > > >>>>> :FORWARD DROP [0:0] > > >>>>> :OUTPUT ACCEPT [0:0] > > >>>>> -A INPUT -d 224.0.0.18/32 -j ACCEPT -A INPUT -d 225.0.0.50/32 -j > > >>>>> ACCEPT -A INPUT -i eth0 -m state --state RELATED,ESTABLISHED -j > > >>>>> ACCEPT -A INPUT -i > > >>>>> eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i > > >>>>> eth2 -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p > > >>>>> icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p udp > > >>>>> -m udp --dport 67 -j ACCEPT -A INPUT -i eth0 -p udp -m udp > > >>>>> --dport 53 -j ACCEPT -A INPUT -i eth1 -p tcp -m state --state > > >>>>> NEW --dport 3922 -j ACCEPT -A INPUT -i eth0 -p tcp -m state -- > > >>>>> state NEW --dport 8080 -j ACCEPT -A INPUT -i eth0 -p tcp -m > > >>>>> state --state NEW --dport 80 -j ACCEPT -A FORWARD -i eth0 -o > > >>>>> eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD > > >>>>> -i eth0 -o eth2 -j ACCEPT -A FORWARD -i eth2 -o eth0 -m state > > >>>>> --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -i eth0 -o eth0 > > >>>>> -m state --state NEW -j ACCEPT -A FORWARD -i > > >>>>> eth0 -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT > > >>>>> COMMIT *mangle :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] > > >>>>> :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING > ACCEPT > > >>>>> [0:0] -A PREROUTING -m state --state ESTABLISHED,RELATED -j > > >>>>> CONNMARK -- restore-mark -A POSTROUTING -p udp --dport > bootpc -j > > >>>>> CHECKSUM -- checksum-fill COMMIT > > >>>>> > > >>>>> > > >>>>> root@r-7-VM:~# ifconfig > > >>>>> > > >>>>> > > >>>>> On Mon, May 20, 2013 at 5:29 PM, Jayapal Reddy Uradi > > >>>>> <jayapalreddy.ur...@citrix.com> wrote: > > >>>>> > > >>>>> Currently we don't have the configurable option. > > >>>>> > > >>>>> 1. You can add egress rule on network with protocol 'all' to > > >>>>> allow all outbound traffic once the network is created. > > >>>>> > > >>>>> 2. If you want to allow traffic by default when ever router is > > >>>>> created One work around will be add the below line into the > > >>>>> iptables-router file > > >>>>> after the this line -I FW_OUTBOUND -m state --state > > >>>>> RELATED,ESTABLISHED > > >>>>> -j ACCEPT > > >>>>> > > >>>>> -A FW_OUTBOUND -j ACCEPT > > >>>>> > > >>>>> > > >>>>> Thanks, > > >>>>> Jayapal > > >>>>> > > >>>>> > > >>>>> On 20-May-2013, at 2:18 PM, Len Bellemore > > >>>>> <len.bellem...@controlcircle.com> wrote: > > >>>>> > > >>>>> Hi Guys > > >>>>> > > >>>>> Anyone know if it's possible to change some of the default > > >>>>> options on a virtual router, so that every time it gets created > > >>>>> it has particular rules? > > >>>>> > > >>>>> My main issue is that I want to allow outbound access by default > > >>>>> to every account. > > >>>>> > > >>>>> Thanks > > >>>>> Len > > >>>>> > > >>>>> > > >>>>> > > >>>>> > > >>>>> > > >>>>> > > >>>>> > > >>>>> > > >>>> > > >>>> > > >>> > > >> > > > >
