Hy,
Can you try to vnc to sysvm machine?
root/password should be work, if you use the default sysvm template.
Peter
2013.10.19. 17:33 keltezéssel, motty cruz írta:
thank you;
I found the file :
[root@kvm1 .ssh]# ls
id_rsa.cloud id_rsa.pub.cloud known_hosts
[root@kvm1 .ssh]#
[root@kvm1 network-scripts]# ssh -i ~/.ssh/id_rsa.cloud -p 3922 169.254.2.56
ssh: connect to host 169.254.2.56 port 3922: No route to host
[root@kvm1 network-scripts]#
I get no route to host, I'm running out of ideas. please help
On Thu, Oct 17, 2013 at 9:15 PM, Jayapal Reddy Uradi <
jayapalreddy.ur...@citrix.com> wrote:
Hi,
use the key file at /root/.ssh/id_rsa.cloud
If it not found, locate key file
Thanks,
Jayapal
On 18-Oct-2013, at 2:41 AM, motty cruz <motty.c...@gmail.com> wrote:
Thanks Peter,
I tried the command you suggested,
[root@kvm1 network-scripts]# ssh -i .ssh/id_rsa.cloud -p 3922
169.254.3.53
Warning: Identity file .ssh/id_rsa.cloud not accessible: No such file or
directory.
ssh: connect to host 169.254.3.53 port 3922: No route to host
[root@kvm1 network-scripts]#
do you mind providing the config file of your vlans? I believe VLANs are
not configure properly
here is my management/storage bridge
less ifcfg-eth1:
DEVICE=eth1
HWADDR=00:25:90:88:51:5D
ONBOOT=yes
BRIDGE=cloudbr1
[root@kvm1 network-scripts]#
less ifcfg-cloudbr1:
DEVICE=cloudbr1
ONBOOT=yes
TYPE=Bridge
IPADDR=10.107.0.7
NETMASK=255.255.255.0
DNS1=8.8.8.8
DNS2=10.0.10.0
Thank you for your support!
On Thu, Oct 17, 2013 at 1:45 PM, Erdősi Péter <f...@niif.hu> wrote:
Hello!
I stucked something like this in Xen.
The problem was the networks (and vlans) on sysvm.
Can you ssh it (in xen, ssh -i .ssh/id_rsa.cloud -p 3922 169.254.X.Y
from the xen host machine, which own the guest), and check the network
avaibility of the system vm?
Best regards,
Peter
2013.10.17. 22:31 keltezéssel, motty cruz írta:
Hello, install Cloudstack 4.2 with KVM hypervisors, Console Proxy MV
started but I am not able to ping the private or public IP, second VM
won't
start. When I ran the command
[root@kvm1 network-scripts]# virsh list
Id Name State
------------------------------**----------------------
2 v-2-VM running
4 s-3-VM running
[root@kvm1 network-scripts]#
I see both VMs running; I configured zone with advance network,
guest/public network on eth0, management/storage on eth1
any ideas or suggestions?
Thanks,
