Can you check whether zone is enabled? if not enabled it.
On Sat, Oct 19, 2013 at 9:34 PM, Erdősi Péter <f...@niif.hu> wrote: > Hy, > > Can you try to vnc to sysvm machine? > root/password should be work, if you use the default sysvm template. > > > Peter > > 2013.10.19. 17:33 keltezéssel, motty cruz írta: > > thank you; >> I found the file : >> [root@kvm1 .ssh]# ls >> id_rsa.cloud id_rsa.pub.cloud known_hosts >> [root@kvm1 .ssh]# >> >> >> [root@kvm1 network-scripts]# ssh -i ~/.ssh/id_rsa.cloud -p 3922 >> 169.254.2.56 >> ssh: connect to host 169.254.2.56 port 3922: No route to host >> [root@kvm1 network-scripts]# >> >> >> I get no route to host, I'm running out of ideas. please help >> >> >> >> On Thu, Oct 17, 2013 at 9:15 PM, Jayapal Reddy Uradi < >> jayapalreddy.ur...@citrix.com> wrote: >> >> Hi, >>> >>> use the key file at /root/.ssh/id_rsa.cloud >>> If it not found, locate key file >>> >>> >>> Thanks, >>> Jayapal >>> >>> On 18-Oct-2013, at 2:41 AM, motty cruz <motty.c...@gmail.com> wrote: >>> >>> Thanks Peter, >>>> I tried the command you suggested, >>>> >>>> [root@kvm1 network-scripts]# ssh -i .ssh/id_rsa.cloud -p 3922 >>>> >>> 169.254.3.53 >>> >>>> Warning: Identity file .ssh/id_rsa.cloud not accessible: No such file or >>>> directory. >>>> ssh: connect to host 169.254.3.53 port 3922: No route to host >>>> [root@kvm1 network-scripts]# >>>> >>>> do you mind providing the config file of your vlans? I believe VLANs >>>> are >>>> not configure properly >>>> here is my management/storage bridge >>>> less ifcfg-eth1: >>>> >>>> DEVICE=eth1 >>>> HWADDR=00:25:90:88:51:5D >>>> ONBOOT=yes >>>> BRIDGE=cloudbr1 >>>> [root@kvm1 network-scripts]# >>>> >>>> less ifcfg-cloudbr1: >>>> DEVICE=cloudbr1 >>>> ONBOOT=yes >>>> TYPE=Bridge >>>> IPADDR=10.107.0.7 >>>> NETMASK=255.255.255.0 >>>> DNS1=8.8.8.8 >>>> DNS2=10.0.10.0 >>>> >>>> Thank you for your support! >>>> >>>> >>>> On Thu, Oct 17, 2013 at 1:45 PM, Erdősi Péter <f...@niif.hu> wrote: >>>> >>>> Hello! >>>>> >>>>> I stucked something like this in Xen. >>>>> The problem was the networks (and vlans) on sysvm. >>>>> Can you ssh it (in xen, ssh -i .ssh/id_rsa.cloud -p 3922 169.254.X.Y >>>>> from the xen host machine, which own the guest), and check the network >>>>> avaibility of the system vm? >>>>> >>>>> Best regards, >>>>> Peter >>>>> >>>>> >>>>> 2013.10.17. 22:31 keltezéssel, motty cruz írta: >>>>> >>>>> Hello, install Cloudstack 4.2 with KVM hypervisors, Console Proxy MV >>>>> >>>>>> started but I am not able to ping the private or public IP, second VM >>>>>> won't >>>>>> start. When I ran the command >>>>>> [root@kvm1 network-scripts]# virsh list >>>>>> Id Name State >>>>>> ------------------------------****---------------------- >>>>>> 2 v-2-VM running >>>>>> 4 s-3-VM running >>>>>> >>>>>> [root@kvm1 network-scripts]# >>>>>> >>>>>> I see both VMs running; I configured zone with advance network, >>>>>> guest/public network on eth0, management/storage on eth1 >>>>>> >>>>>> any ideas or suggestions? >>>>>> >>>>>> Thanks, >>>>>> >>>>>> >>>>>> >>> >