Hi Adeel,

This would most likely get you into trouble with your red tape admins – if you 
simply set the IP address 10.103.72.65 statically and let’s say your DHCP lease 
time is 24 hours – then after 24 hours the DHCP server will not have seen any 
DHCP renewals (DHCP starts the renewal process after half the lease time – i.e. 
in this case 12 hours), and therefore assumes the address is no longer in use. 
Another host may therefore pick up the same IP and you end up with IP conflicts.

Regards,
Dag Sonstebo
Cloud Architect
ShapeBlue

On 22/03/2017, 12:39, "Muhammad Adeel Zahid" <[email protected]> wrote:

    Hi Dag,
    
    
    DHCP and its settings are beyond my control. I will have to go through some 
procedures (aka red tape) to get the exclusions static IPs bound to ACS and 
KVM. For now,  what I am thinking to do is, connect to network and get an IP 
10.103.72.65 and declare it as static in network settings of my computer (say 
ACS management server) and rely on the fact that IP wouldn't change as long as 
I don't reconnect.
    
    Once the testing is done, we can go through the approval procedures for MAC 
binding and IP addresses exclusion from DHCP.
    
    
    Would it work as I think?
    
    
    Regards
    
    Adeel
    
    ________________________________
    From: Dag Sonstebo <[email protected]>
    Sent: Wednesday, March 22, 2017 5:31:12 PM
    To: [email protected]
    Subject: Re: Cloudstack and KVM installation with IP addresses allocated by 
DHCP
    
    Hi Muhammed,
    
    This is done externally to CloudStack and depends on what DHCP 
infrastructure you have in place. All DHCP implementations have the option to 
reserve an address, i.e. a setting that confirms your MAC address – e.g. 
01:02:03:AA:BB:CC is always handed out the same IP address – in your case e.g. 
10.103.72.65/23. Once you have set this on your DHCP server(s) you can safely 
set the IP address statically on your servers if you don’t want to rely on DHCP 
– this means you will never have an IP conflict between a statically configured 
IP address and your DHCP scope.
    
    Please note though – you will most likely need more IP addresses for 
CloudStack than the 1 (2?) you already have – CloudStack needs more IP 
addresses for it’s system range. As a result you are much better off using a 
subnet without DHCP – or configure an exclusion in your DHCP scope, e.g. 
something 10.103.72.1-10.103.72.99, such that you can safely use this excluded 
range for CloudStack.
    
    Regards,
    Dag Sonstebo
    Cloud Architect
    ShapeBlue
    
    On 22/03/2017, 12:22, "Muhammad Adeel Zahid" <[email protected]> wrote:
    
        Thanks Boris and Dag for quick reply.
    
    
        @Dag How do I utilize static IP addresses in combination with DHCP 
reservations?
    
    
        I have just installed CentOs and connected to the network on wire. DHCP 
has given me 10.103.72.65/23 IP address. What do I need to do from now on?
    
    
        Regards
    
        ________________________________
        From: Dag Sonstebo <[email protected]>
        Sent: Wednesday, March 22, 2017 4:41:26 PM
        To: [email protected]
        Subject: Re: Cloudstack and KVM installation with IP addresses 
allocated by DHCP
    
        Hi Muhammed,
    
        This may be possible if your DNS infrastructure is rock solid and is 
guaranteed to work from all CloudStack networks (you would possibly also have 
to set your TTL on your DNS entries low)  – but all in all I would recommend 
you utilize static IP addresses, alternatively in combination with DHCP 
reservations to ensure you don’t have IP conflicts in your infrastructure.
    
        Regards,
        Dag Sonstebo
        Cloud Architect
        ShapeBlue
    
        On 22/03/2017, 11:26, "Muhammad Adeel Zahid" <[email protected]> 
wrote:
    
            Hello guys,
    
    
            I have two systems and both of them are connected to a network that 
allocates IP addresses using DHCP. I want to install cloudstack management 
server on the one system and KVM (hypervisor) on the other system.
    
            Can I do this? What steps would differ from normal (with static 
IPs)  ACS and KVM installation?
    
    
            Regards
    
            Adeel
    
    
    
        [email protected]
        www.shapeblue.com<http://www.shapeblue.com>
        53 Chandos Place, Covent Garden, London  WC2N 4HSUK
        @shapeblue
    
    
    
    
    
    
    [email protected]
    www.shapeblue.com<http://www.shapeblue.com>
    53 Chandos Place, Covent Garden, London  WC2N 4HSUK
    @shapeblue
    
    
    
    


[email protected] 
www.shapeblue.com
53 Chandos Place, Covent Garden, London  WC2N 4HSUK
@shapeblue
  
 

Reply via email to