Hi Anshul, Thanks for your reply.
Can you specify the setting parameter? All I can see under settings for a zone are below : 1. enable.dynamic.scale.vm Enables/Disables dynamically scaling a vm 2. guest.domain.suffix Default domain name for vms inside virtualized networks fronted by router 3. minreq.sysvmtemplate.version What version should the Virtual Routers report 4. network.router.EnableServiceMonitoring service monitoring in router enable/disable option, 5. network.throttling.rate Default data transfer rate in megabits per second allowed in network. 6. pool.storage.allocated.capacity.disablethreshold Percentage (as a value between 0 and 1) of allocated storage utilization above which allocators will disable using the pool for low allocated storage available. 7. pool.storage.capacity.disablethreshold Percentage (as a value between 0 and 1) of storage utilization above which allocators will disable using the pool for low storage available. 8. system.vm.use.local.storage Indicates whether to use local storage pools or shared storage pools for system VMs. 9. use.external.dns Bypass internal dns, use external dns1 and dns2 regards, Imran -----Original Message----- From: Anshul Gangwar [mailto:[email protected]] Sent: Thursday, August 03, 2017 1:32 PM To: [email protected] Subject: Re: CloudStack 4.9 Enabling Local Storage for Zones That option is available in zone details. Regards, Anshul On 03/08/17, 1:16 PM, "Imran Ahmed" <[email protected]> wrote: Hello All, I am working on a cloudstack 4.9 setup with a few KVM hosts. Some of the KVM hosts have local primary storage besides the NFS storage. In the global settings I could not find an option to enable local storage for the zone. ( I am using advanced zone here). When I tried to create a VM instance on the local storage, it gave an error saying something like " Local storage is not enabled for the zone...." To resolve this issue, I had to manually enable the local storage setting in the database as below: update data_center set is_local_storage_enabled = 1 where id =<zone id here> ; I wonder why this option is not available on the GUI under global settings.. Thanks and regards, Imran DISCLAIMER ========== This e-mail may contain privileged and confidential information which is the property of Accelerite, a Persistent Systems business. It is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, you are not authorized to read, retain, copy, print, distribute or use this message. If you have received this communication in error, please notify the sender and delete all copies of this message. Accelerite, a Persistent Systems business does not accept any liability for virus infected mails.
