I have experience with multiple guest physical networks, not public networks.
New physical network can be added via api (or cloudmonkey) 1. createPhysicalNetwork 2. updatePhysicalNetwork to Enabled 3. addTrafficType to the physical network with network label like cloudbr0. Please refer to cloudstack api https://cloudstack.apache.org/api/apidocs-4.17/ For guest physical networks, tags are must. Not sure if public physical networks work without tag. -Wei On Tuesday, 3 January 2023, Lukáš Mrtvý <lukas.mr...@gmail.com> wrote: > Yes, another physical network. > I tried to bridge eth0 and eth2 ( both are flat networks, not VLANs), but > got blocked by the telco provider in the datacenter, as eth2 is a physical > network connected to the internet. > Can You elaborate on how is possible ( without NATting ) to have two > physical networks as "Public" networks? Of course, I want to deploy > SystemVMs to eth0. Thanks > > út 3. 1. 2023 v 16:42 odesílatel Alex Mattioli < > alex.matti...@shapeblue.com> > napsal: > > > You mean another physical network completely? That's also possible, but a > > bit more complex. > > In your case, can't you just use another VLAN in the same physical > network? > > > > Cheers, > > Alex > > > > > > > > > > -----Original Message----- > > From: Lukáš Mrtvý <lukas.mr...@gmail.com> > > Sent: 03 January 2023 15:43 > > To: users@cloudstack.apache.org > > Subject: Re: Multiple public networks per zone ? > > > > Hello, > > I am talking about using another "cable" as another public network to > > deploy system VMs to. > > > > For example this > > > > https://mermaid.live/view#pako:eNptkDFvAjEMhf- > K5alInNoy3toulcpStiqLuRgu4uKcgiOEgP9e56Corbo9P33W8_MJu-QZW9xmGnt4_ > 3ACkFNRztA0zTmS0JYji4KwHlLenYG1f_6DjWU9hO4X8lSRIEaY-_B2E7N_ > cHiEA8m0tPi5VNFbSLX3ZX098mVIxa-Uul214R4G98smtYAqWTzOMXKOFLz1P > FXTofZWymFr0vOGyqAOnVwMpaJpdZQOW82F51hGT8qvgSw8fpsjyWdKNm5o2 > NvMPmjKy-srp49evgCD7nXA > > > > - public network ( RFC1918 ) is reachable via router or other devices ( > > haproxy, vpn ) on this network, for example haproxy doing reverse proxy > for > > cloudstack ui > > - management network ( RFC1918 ) is available only for certain peope via > > conditional routing > > - public network / wan ( IPv4 pool ) is directly connected to the > internet > > > > út 3. 1. 2023 v 14:17 odesílatel Alex Mattioli < > > alex.matti...@shapeblue.com> > > napsal: > > > > > Hi Lukáš, > > > Definite possible. > > > You can just add a new "public" IP range to your zone and select the > > > option "Set Reservation" and then "SystemVM". You then need to destroy > > > your SystemVMs, they will be recreated with those IPs. > > > Cheers, > > > Alex > > > > > > > > > > > > > > > > > > -----Original Message----- > > > From: Lukáš Mrtvý <lukas.mr...@gmail.com> > > > Sent: 31 December 2022 10:37 > > > To: users@cloudstack.apache.org > > > Subject: Multiple public networks per zone ? > > > > > > Is possible to create multiple public networks per zone ? ( traffic > > type: > > > Public ) > > > I would like to put systemvms to this network to save two "Public" > > > IPv4, these arent cheap these days. The use case would be to deploy > > > systemvms to > > > RFC1918 external network and use reverse proxy to access cloudstack > > > webui and systemvms from the internet via this reverse proxy. Other > > > one public network would be an actual WAN. ( NAT isnt solution for me > > > ) Thanks BR, LM > > > > > > > > > -- > > S pozdravem > > Lukáš Mrtvý > > > > > -- > S pozdravem > Lukáš Mrtvý >
