Hi Cloudstack Community,
i have trouble with the Zone/Welcome Wizard in Cloudstack - the System VMs are
in a deployment/reboot loop.
Maybe because of the wrong or too long Bridge Name for VXLAN with EVPN.
*
Setup modify sh for VXLAN with EVPN
*
The Hosts have two physical NICs:
*
eno1 = Transfer LAN-1 OSPF 172.16.11.2/30
*
eno2 = Transfer LAN-2 OSPF 172.16.12.2/30
*
lo = Loopback for BGP with EVPN 10.1.0.1/32
*
brdrbd1 = Bridge for DRBD / Linstor Traffic 10.10.26.101 /24
*
vxlan1026 as Subinterface, added by NMCLI
*
brcsmm1 = Bridge for Cloudstack Management Traffic 10.10.28.101 /24
*
vxlan1028 as Subinterface, added by NMCLI
i’m looking for „normal“ VXLAN Bridges like brvxlan2001 for example customer1...
After the Wizard completes, the Systems VMs are permanently rebooted/deployed.
And the Wizard create following Interfaces: cloud0 and vxlan1028.1096@vxlan1028
Log Show (1096 should be the public VXLAN):
"“result”:“false”,“details”:“Failed to create vnet 1096: Error: argument
\"brvxlan1028-1096\" is wrong: \"name\" not a valid ifname... Cannot find
device \"brvxlan1028-1096\" Failed to create br: brvxlan1028-1096”
Failed to create vnet 1096: Error: argument "brvxlan1028-1096" is wrong: "name"
not a valid
ifname/usr/share/cloudstack-common/scripts/vm/network/vnet/modifyvlan.sh: line
59: /proc/sys/net/
ipv6/conf/brvxlan1028-1096/disable_ipv6: No such file or directoryCannot find
device "brvxlan1028-1096"Failed to create br: brvxlan1028-1096
i’ve following setups without success:
[SCR-20260129-kvah.png]
and
[image.png]
have someone a idea how to create the Interfaces and Traffic Types?
Best Regards,
Jan
