Hi, the vlan script will be executed because in the wizard i used only the number, without vxlan:// prefix. If no Prefix is given, VLAN will be used. I thought, if i choose type VXLAN, the VNI will be used and not the VLAN-ID. (CloudStack 4.21.0.0 )
Because of that, I’m a step further now, but i don’t know how to use the Pubic and Guest Traffic as VXLAN on a bridge (without an IP for the Hypervisor) Should the Guest and Traffic also have a label and/or an VNI (or should i create a dedicated bridge for Guest and Public)? brvx is down until a VXLAN sub-interface is added… [root@kvm01 ~]# brctl show bridge name bridge id STP enabled interfaces brcsmm1 8000.4ee1bcb57803 no vxlan1028 brdrbd1 8000.f6bdcd5a28d2 no vxlan1026 brvx 8000.000000000000 no [root@kvm01 ~]# ip -br link show lo UNKNOWN 00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP> eno1 UP 00:0e:1e:96:a0:40 <BROADCAST,MULTICAST,UP,LOWER_UP> eno2 UP 00:0e:1e:96:a0:42 <BROADCAST,MULTICAST,UP,LOWER_UP> eno3 UP 00:0e:1e:96:a0:44 <BROADCAST,MULTICAST,UP,LOWER_UP> eno4 UP 00:0e:1e:96:a0:46 <BROADCAST,MULTICAST,UP,LOWER_UP> brdrbd1 UP f6:bd:cd:5a:28:d2 <BROADCAST,MULTICAST,UP,LOWER_UP> vxlan1026 UNKNOWN f6:bd:cd:5a:28:d2 <BROADCAST,MULTICAST,UP,LOWER_UP> brcsmm1 UP 4e:e1:bc:b5:78:03 <BROADCAST,MULTICAST,UP,LOWER_UP> vxlan1028 UNKNOWN 4e:e1:bc:b5:78:03 <BROADCAST,MULTICAST,UP,LOWER_UP> brvx DOWN 00:00:00:00:00:00 <NO-CARRIER,BROADCAST,MULTICAST,UP> Jan Von: Júlíus Þór Bess <[email protected]> Datum: Dienstag, 3. Februar 2026 um 14:20 An: [email protected] <[email protected]> Betreff: Re: AW: VXLAN-EVPN Bridge Name and Traffic Labels Hi, Please show the output of "brctl show" and "ip -br link show" I suspect the GUEST network is inheriting brcsmm1 from Management since GUEST is not assigned a label. On 2/3/26 6:31 AM, Jan Vöhringer via users wrote: > Hi Júlíus, > > thank you for your message. > > i’ve created again a new zone (new DB from scratch) and do following traffic > tags: > > Physical Network 1, Isolation Method: VXLAN > > * > GUEST (without Label) > * > MANAGEMENT (brcsmm1) > * > PUBLIC (without Label) > * > STORAGE (brdrbd1) > > log show: Error: argument "brvxlan1028-1096" is wrong: "name" not a valid > ifname Failed to create br: brvxlan1028-1096 > > Failed to create vnet 1096: Error: argument "brvxlan1028-1096" is wrong: > "name" not a valid > ifname/usr/share/cloudstack-common/scripts/vm/network/vnet/modifyvlan.sh: > line 59: /proc/sys/net/ipv6/conf/brvxlan1028-1096/disable_ipv6: No such file > or directoryCannot find device "brvxlan1028-1096"Failed to create br: > brvxlan1028-1096 > > brvxlan1028-1096 - don’t know why this is used or created, brvxlan1028 is > brcsmm1 with subinterface vxlan1028 > 1096 is my public guest Network, but i didn’t used it in the wizard. > > and i can’t explain why still modifyvlan instead of modifyvxlan is used. > Maybe if NO Traffic Label is set, it uses modifyvlan? > > Best Regards, > Jan > > > Von: Júlíus Þór Bess <[email protected]> > Datum: Montag, 2. Februar 2026 um 18:10 > An: [email protected] <[email protected]> > Betreff: Re: VXLAN-EVPN Bridge Name and Traffic Labels > > Hi Jan, > > Max ifname length is 15 characters, so yes. The ifname of > brvxlan1028-1096 is too long. > > Did you replace the modify-vxlan.sh with the EVPN-VXLAN version? > Otherwise you're using the multicast version. > > I also notice that the modifyvlan.sh (notice vlan, not vxlan) is > executing and trying to create a VLAN on a traditional bridge... That's > probably not what you want. What should happen is that modifyvxlan.sh > should have created another bridge named brvx1096 which should have a > bridge slave of vxlan1096. Names might not be entirely correct but you > probably get what I mean. > > On 2/2/26 4:56 PM, Jan V�hringer via users wrote: >> Hi Cloudstack Community, >> >> i have trouble with the Zone/Welcome Wizard in Cloudstack - the System >> VMs are in a deployment/reboot loop. >> Maybe because of the wrong or too long Bridge Name for VXLAN with EVPN. >> >> * >> Setup modify sh for VXLAN with EVPN >> * >> The Hosts have two physical NICs: >> o >> eno1 = Transfer LAN-1 OSPF 172.16.11.2/30 >> o >> eno2 = Transfer LAN-2 OSPF 172.16.12.2/30 >> o >> lo = Loopback for BGP with EVPN 10.1.0.1/32 >> o >> brdrbd1 = Bridge for DRBD / Linstor Traffic 10.10.26.101 /24 >> + >> vxlan1026 as Subinterface, added by NMCLI >> o >> brcsmm1 = Bridge for Cloudstack Management Traffic >> 10.10.28.101 /24 >> + >> vxlan1028 as Subinterface, added by NMCLI >> >> >> i’m looking for „normal“ VXLAN Bridges like brvxlan2001 for example >> customer1... >> >> After the Wizard completes, the Systems VMs are permanently >> rebooted/deployed. And the Wizard create following Interfaces: cloud0 >> and vxlan1028.1096@vxlan1028 >> >> Log Show (1096 should be the public VXLAN): >> "“result”:“false”,“details”:“Failed to create vnet 1096: Error: >> argument \"brvxlan1028-1096\" is wrong: \"name\" not a valid ifname... >> Cannot find device \"brvxlan1028-1096\" Failed to create br: >> brvxlan1028-1096” >> Failed to create vnet 1096: Error: argument "brvxlan1028-1096" is >> wrong: "name" not a valid >> ifname/usr/share/cloudstack-common/scripts/vm/network/vnet/modifyvlan.sh: >> line 59: /proc/sys/net/ >> ipv6/conf/brvxlan1028-1096/disable_ipv6: No such file or >> directoryCannot find device "brvxlan1028-1096"Failed to create br: >> brvxlan1028-1096 >> >> >> i’ve following setups without success: >> SCR-20260129-kvah.png >> and >> image.png >> >> have someone a idea how to create the Interfaces and Traffic Types? >> >> Best Regards, >> Jan
