Yep, same here. Here are some of the messages I'm seeing: No /loader vm_page_alloc_contig: (a bunch of these)
ahci0.0: START HARDRESET ahci0.0: Cannot start FIS reception ahci0.0: PMPROBE failed to start port, cannot soft reset ahci0.0: Cannot start FIS reception ahci0.0: failed to start command DMA on port, disabling ahci0.0: END HARDRESET 16 ahci0.0: waiting 10 seconds on insertion The above ahci sequence repeats about 4 times. fwohci0: phi read failed(1) (a ton of these) And eventually this: xpt: func=0xffffffff80281817 arg=0 (3 or 4 times) Giving up, interrupt routing is probably hosed Mounting root from ufs:da8s1a no disk named 'da8s1a' setrootbyname failed ffs_mountroot: can't find rootvp Root mount failed: 6 Tim On Wed, Jul 25, 2012 at 12:23 PM, Pierre Abbat <p...@phma.optus.nu> wrote: > On Wednesday 25 July 2012 13:54:11 Tim Darby wrote: > > Unfortunately, it failed during boot on my Dell Studio 14z laptop (1440), > > so I think DF just doesn't like this hardware. I did try booting without > > ACPI and AHCI, but no luck. Lots of errors, but where it failed each > time > > was at device "xpt". I can provide exact error messages, if you want. > > Sounds like my laptop. The interrupt routing is hosed and it couldn't mount > the root filesystem of the CD or thumb drive. > > Pierre > > -- > The Black Garden on the Mountain is not on the Black Mountain. >
