Greetings Team,
I am attempting to execute dpdk test-suite but am facing the below error PREREQ
EXCEPTION Traceback
[root@tester dts]# ./dts --config-file executions/execution.cfg
dts:
DUT 10.70.2.6
tester: ssh [email protected]<mailto:[email protected]>
tester: ssh [email protected]<mailto:[email protected]>
dut.10.70.2.6: ssh [email protected]<mailto:[email protected]>
dut.10.70.2.6: ssh [email protected]<mailto:[email protected]>
dts: CACHE: Cache will not be read.
dts: SKIP: The DPDK setup steps will be executed.
tester: sed -i '/10.70.2.6/d' ~/.ssh/known_hosts
tester: killall scapy 2>/dev/null; echo tester
tester: awk '/Hugepagesize/ {print $2}' /proc/meminfo
tester: umount `awk '/hugetlbfs/ { print $2 }'
/proc/mounts`
tester: awk '/hugetlbfs/ { print $2 }' /proc/mounts
tester: mkdir -p /mnt/huge
tester: mount -t hugetlbfs nodev /mnt/huge
tester: awk '/Hugepagesize/ {print $2}' /proc/meminfo
tester: echo 1024 >
/sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
tester: scp -v dep/tgen.tgz
[email protected]:~/<mailto:[email protected]:~/>
tester: scp -v dep/tclclient.tgz
[email protected]:~/<mailto:[email protected]:~/>
tester: tar zxf tgen.tgz
tester: tar zxf tclclient.tgz
tester: modprobe uio
tester: Core0 bypassed
tester: modprobe igb
tester: modprobe ixgbe
tester: modprobe e1000e
tester: modprobe e1000
tester: cat /sys/bus/pci/devices/0000\:04\:00.0/vendor
tester: cat /sys/bus/pci/devices/0000\:04\:00.0/device
tester: cat /sys/bus/pci/devices/0000\:04\:00.0/vendor
tester: cat /sys/bus/pci/devices/0000\:04\:00.0/device
tester: ifconfig eno49 up
tester: cat /sys/bus/pci/devices/0000\:04\:00.1/vendor
tester: cat /sys/bus/pci/devices/0000\:04\:00.1/device
tester: cat /sys/bus/pci/devices/0000\:04\:00.1/vendor
tester: cat /sys/bus/pci/devices/0000\:04\:00.1/device
tester: ifconfig eno50 up
tester: cat /sys/bus/pci/devices/0000\:05\:00.0/vendor
tester: cat /sys/bus/pci/devices/0000\:05\:00.0/device
tester: cat /sys/bus/pci/devices/0000\:05\:00.0/vendor
tester: cat /sys/bus/pci/devices/0000\:05\:00.0/device
tester: ifconfig ens2f0 up
tester: cat /sys/bus/pci/devices/0000\:05\:00.1/vendor
tester: cat /sys/bus/pci/devices/0000\:05\:00.1/device
tester: cat /sys/bus/pci/devices/0000\:05\:00.1/vendor
tester: cat /sys/bus/pci/devices/0000\:05\:00.1/device
tester: ifconfig ens2f1 up
tester: Tester: [0000:04:00.0 10df:0720] unknow_nic
tester: Tester: [0000:04:00.1 10df:0720] unknow_nic
tester: Tester: [0000:05:00.0 8086:10fb] ens2f0
tester: Tester: [0000:05:00.1 8086:10fb] ens2f1
tester: {'intf': 'ens2f0', 'mac': '14:02:ec:74:2b:ec',
'pci': '0000:05:00.0', 'ipv4': '10.70.12.5', 'ipv6':
'fe80::1602:ecff:fe74:2bec', 'type': '8086:10fb', 'port': <net_device.NetDevice
object at 0x7f7976c99790>}
tester: {'intf': 'ens2f1', 'mac': '14:02:ec:74:2b:ed',
'pci': '0000:05:00.1', 'ipv4': '10.70.3.5', 'ipv6':
'fe80::1602:ecff:fe74:2bed', 'type': '8086:10fb', 'port': <net_device.NetDevice
object at 0x7f7976c99650>}
dts: PREREQ EXCEPTION Traceback (most recent call
last):
File "/root/dts/framework/dts.py", line 341, in dts_run_prerequisties
dutobj.prerequisites()
File "/root/dts/framework/project_dpdk.py", line 326, in prerequisites
self.prepare_package()
File "/root/dts/framework/project_dpdk.py", line 273, in prepare_package
assert (os.path.isfile(self.package) is True), "Invalid package"
AssertionError: Invalid package
dts: CACHE: Discarding cache.
dts: DTS ended
The current running configuration in our set-up is as follows:
[root@tester dts]# cat conf/ports.cfg
# DUT Port Configuration
# [DUT IP]
# ports=
# pci=Pci BDF,intf=Kernel interface;
# pci=Pci BDF,mac=Mac address,peer=Tester Pci BDF,numa=Port Numa
# pci=Pci BDF,peer=IXIA:card.port
# pci=Pci BDF,peer=Tester Pci BDF,tp_ip=$(IP),tp_path=$({PERL_PATH);
# pci=Pci BDF,peer=Tester Pci BDF,sec_port=yes,first_port=Pci BDF;
# [VM NAME] virtual machine name; This section is for virutal scenario
# ports =
# dev_idx=device index of ports info, peer=Tester Pci BDF
[10.70.2.6]
ports =
pci=05:00.0,intf=ens2f0;
pci=05:00.1,intf=ens2f1;
[root@tester dts]# cat executions/execution.cfg
[Execution1]
crbs=10.70.2.6
drivername=igb_uio
test_suites=hello_world
test_suites=
cmdline,
hello_world
targets=x86_64-native-linuxapp-gcc
parameters=nic_type=niantic:func=true
[root@tester dts]# cat conf/crbs.cfg
#DUT crbs Configuration
#[DUT IP]
# dut_ip: DUT ip address
# dut_user: Login DUT username
# dut_passwd: Login DUT password
# os: operation system type linux or freebsd
# tester_ip: Tester ip address
# tester_passwd: Tester password
# ixia_group: IXIA group name
# channels: Board channel number
# bypass_core0: Whether by pass core0
[10.70.2.6]
dut_ip=10.70.2.6
dut_user=root
dut_passwd=HP1nvent
os=fedora
tester_ip=10.70.2.5
tester_passwd=HP1nvent
channels=4
It would be helpful if anyone could guide me with the correct pointers to go
over this issue and help me advance further.
Thanking in advance
Chengappa
If everyone is moving forward together, then success takes care of itself....!!
