Hi Rosen / Team,
I cross checked on the pre-requisite package and I see that the following packages are installed on both TESTER and TARGET DUT * dnf install tcl * dnf install python-xlwt * dnf install python-pexpect * dnf install numpy * dnf install python-docutils * dnf install pcapy * dnf install python-xlrd * dnf install scapy Apart from these, if there are any missing packages to be installed kindly do let me know so that I can have them installed too. Awaiting for your response, patiently. Thanks & Regards, Chengappa -----Original Message----- From: M R, Chengappa (Network Function Virtualization) Sent: Friday, April 27, 2018 8:41 AM To: 'Rosen, Rami' <[email protected]>; [email protected] Subject: RE: DPDK Test Suite failing with PREREQ EXCEPTION Traceback Hi Rosen, Many thanks for acknowledging the issue addressed in the mail. Yes I have taken care and made sure that all the required packages are installed. However, let me go thru the link you have shared cross check the list of system requirements and get back to you. Best Regards, Chengappa -----Original Message----- From: Rosen, Rami [mailto:[email protected]] Sent: Friday, April 27, 2018 8:16 AM To: M R, Chengappa (Network Function Virtualization) <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]> Subject: RE: DPDK Test Suite failing with PREREQ EXCEPTION Traceback Hi, The exception you got typically happens when a package is not installed on the host. Did you install all the packages which appear in the System Requirements section of the DTS gsg ? (like python-xlwt, python-pexpect and the others) ? see: See: http://dpdk.org/doc/dts/gsg/sys_reqs.html In case this won't help, I would suggest to ask in the DTS mailing list, [email protected]<mailto:[email protected]>. Regards, Rami Rosen -----Original Message----- From: users [mailto:[email protected]] On Behalf Of M R, Chengappa (Network Function Virtualization) Sent: Thursday, April 26, 2018 13:04 To: [email protected]<mailto:[email protected]> Cc: M R, Chengappa (Network Function Virtualization) <[email protected]<mailto:[email protected]>> Subject: [dpdk-users] DPDK Test Suite failing with PREREQ EXCEPTION Traceback Importance: High Greetings Team, I am attempting to execute dpdk test-suite but am facing the below error PREREQ EXCEPTION Traceback [root@tester dts]# ./dts --config-file executions/execution.cfg dts: DUT 10.70.2.6 tester: ssh [email protected]<mailto:[email protected]<mailto:[email protected]%3cmailto:[email protected]>> tester: ssh [email protected]<mailto:[email protected]<mailto:[email protected]%3cmailto:[email protected]>> dut.10.70.2.6: ssh [email protected]<mailto:[email protected]<mailto:[email protected]%3cmailto:[email protected]>> dut.10.70.2.6: ssh [email protected]<mailto:[email protected]<mailto:[email protected]%3cmailto:[email protected]>> dts: CACHE: Cache will not be read. dts: SKIP: The DPDK setup steps will be executed. tester: sed -i '/10.70.2.6/d' ~/.ssh/known_hosts tester: killall scapy 2>/dev/null; echo tester tester: awk '/Hugepagesize/ {print $2}' /proc/meminfo tester: umount `awk '/hugetlbfs/ { print $2 }' /proc/mounts` tester: awk '/hugetlbfs/ { print $2 }' /proc/mounts tester: mkdir -p /mnt/huge tester: mount -t hugetlbfs nodev /mnt/huge tester: awk '/Hugepagesize/ {print $2}' /proc/meminfo tester: echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages tester: scp -v dep/tgen.tgz [email protected]:~/<mailto:[email protected]:~/<mailto:[email protected]:~/%3cmailto:[email protected]:~/>> tester: scp -v dep/tclclient.tgz [email protected]:~/<mailto:[email protected]:~/<mailto:[email protected]:~/%3cmailto:[email protected]:~/>> tester: tar zxf tgen.tgz tester: tar zxf tclclient.tgz tester: modprobe uio tester: Core0 bypassed tester: modprobe igb tester: modprobe ixgbe tester: modprobe e1000e tester: modprobe e1000 tester: cat /sys/bus/pci/devices/0000\:04\:00.0/vendor tester: cat /sys/bus/pci/devices/0000\:04\:00.0/device tester: cat /sys/bus/pci/devices/0000\:04\:00.0/vendor tester: cat /sys/bus/pci/devices/0000\:04\:00.0/device tester: ifconfig eno49 up tester: cat /sys/bus/pci/devices/0000\:04\:00.1/vendor tester: cat /sys/bus/pci/devices/0000\:04\:00.1/device tester: cat /sys/bus/pci/devices/0000\:04\:00.1/vendor tester: cat /sys/bus/pci/devices/0000\:04\:00.1/device tester: ifconfig eno50 up tester: cat /sys/bus/pci/devices/0000\:05\:00.0/vendor tester: cat /sys/bus/pci/devices/0000\:05\:00.0/device tester: cat /sys/bus/pci/devices/0000\:05\:00.0/vendor tester: cat /sys/bus/pci/devices/0000\:05\:00.0/device tester: ifconfig ens2f0 up tester: cat /sys/bus/pci/devices/0000\:05\:00.1/vendor tester: cat /sys/bus/pci/devices/0000\:05\:00.1/device tester: cat /sys/bus/pci/devices/0000\:05\:00.1/vendor tester: cat /sys/bus/pci/devices/0000\:05\:00.1/device tester: ifconfig ens2f1 up tester: Tester: [0000:04:00.0 10df:0720] unknow_nic tester: Tester: [0000:04:00.1 10df:0720] unknow_nic tester: Tester: [0000:05:00.0 8086:10fb] ens2f0 tester: Tester: [0000:05:00.1 8086:10fb] ens2f1 tester: {'intf': 'ens2f0', 'mac': '14:02:ec:74:2b:ec', 'pci': '0000:05:00.0', 'ipv4': '10.70.12.5', 'ipv6': 'fe80::1602:ecff:fe74:2bec', 'type': '8086:10fb', 'port': <net_device.NetDevice object at 0x7f7976c99790>} tester: {'intf': 'ens2f1', 'mac': '14:02:ec:74:2b:ed', 'pci': '0000:05:00.1', 'ipv4': '10.70.3.5', 'ipv6': 'fe80::1602:ecff:fe74:2bed', 'type': '8086:10fb', 'port': <net_device.NetDevice object at 0x7f7976c99650>} dts: PREREQ EXCEPTION Traceback (most recent call last): File "/root/dts/framework/dts.py", line 341, in dts_run_prerequisties dutobj.prerequisites() File "/root/dts/framework/project_dpdk.py", line 326, in prerequisites self.prepare_package() File "/root/dts/framework/project_dpdk.py", line 273, in prepare_package assert (os.path.isfile(self.package) is True), "Invalid package" AssertionError: Invalid package dts: CACHE: Discarding cache. dts: DTS ended The current running configuration in our set-up is as follows: [root@tester dts]# cat conf/ports.cfg # DUT Port Configuration # [DUT IP] # ports= # pci=Pci BDF,intf=Kernel interface; # pci=Pci BDF,mac=Mac address,peer=Tester Pci BDF,numa=Port Numa # pci=Pci BDF,peer=IXIA:card.port # pci=Pci BDF,peer=Tester Pci BDF,tp_ip=$(IP),tp_path=$({PERL_PATH); # pci=Pci BDF,peer=Tester Pci BDF,sec_port=yes,first_port=Pci BDF; # [VM NAME] virtual machine name; This section is for virutal scenario # ports = # dev_idx=device index of ports info, peer=Tester Pci BDF [10.70.2.6] ports = pci=05:00.0,intf=ens2f0; pci=05:00.1,intf=ens2f1; [root@tester dts]# cat executions/execution.cfg [Execution1] crbs=10.70.2.6 drivername=igb_uio test_suites=hello_world test_suites= cmdline, hello_world targets=x86_64-native-linuxapp-gcc parameters=nic_type=niantic:func=true [root@tester dts]# cat conf/crbs.cfg #DUT crbs Configuration #[DUT IP] # dut_ip: DUT ip address # dut_user: Login DUT username # dut_passwd: Login DUT password # os: operation system type linux or freebsd # tester_ip: Tester ip address # tester_passwd: Tester password # ixia_group: IXIA group name # channels: Board channel number # bypass_core0: Whether by pass core0 [10.70.2.6] dut_ip=10.70.2.6 dut_user=root dut_passwd=HP1nvent os=fedora tester_ip=10.70.2.5 tester_passwd=HP1nvent channels=4 It would be helpful if anyone could guide me with the correct pointers to go over this issue and help me advance further. Thanking in advance Chengappa If everyone is moving forward together, then success takes care of itself....!!
