Hi all,
I have already set up 2 VFs on enslf1 NIC. The DPDK version is
dpdk-stable-19.11.7. There is one issue related to max packet length to 9600.
I tried both igb_uio and VFIO_PCI as driver. Could you kindly guide me how to
fix this issue?
#ens1f1 setting
5: ens1f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode
DEFAULT group default qlen 1000
link/ether f8:f2:1e:13:e0:9d brd ff:ff:ff:ff:ff:ff
vf 0 MAC 00:11:22:33:44:55, vlan 2, spoof checking on, link-state auto,
trust off, query_rss off
vf 1 MAC 00:11:22:33:44:55, vlan 1, spoof checking on, link-state auto,
trust off, query_rss off
#ens1f1 profile
ethtool -i ens1f1
driver: ixgbe
version: 5.1.0-k
firmware-version: 0x00015e0b
expansion-rom-version:
bus-info: 0000:03:00.1
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
#issue I met
EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: PCI device 0000:03:10.1 on NUMA socket 0
EAL: probe driver: 8086:10ed net_ixgbe_vf
EAL: using IOMMU type 1 (Type 1)
initializing port 0 for TX, drv=net_ixgbe_vf
Port 0 MAC: 00 11 22 33 44 55
Port 0: nb_rxd 4096 nb_txd 4096
ixgbevf_dev_rx_init(): Set max packet length to 9600 failed.
ixgbevf_dev_start(): Unable to initialize RX hardware (-22)
Thanks,
Thomas.
