Actually, the Jumbo frame is enanbled during . What could be the reason for
failure to set max package length to 9600 bytes?
struct rte_eth_rxmode rxmode =
{ .split_hdr_size = 0,
.max_rx_pkt_len = MAX_RX_LEN,
.offloads=(DEV_RX_OFFLOAD_JUMBO_FRAME
/*|DEV_RX_OFFLOAD_CRC_STRIP*/)
};
At 2021-04-08 00:06:06, "vdf" <thomas200...@163.com> wrote:
>Hi all,
>
>
>I have already set up 2 VFs on enslf1 NIC. The DPDK version is
>dpdk-stable-19.11.7. There is one issue related to max packet length to 9600.
>I tried both igb_uio and VFIO_PCI as driver. Could you kindly guide me how to
>fix this issue?
>
>
>#ens1f1 setting
>5: ens1f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode
>DEFAULT group default qlen 1000
> link/ether f8:f2:1e:13:e0:9d brd ff:ff:ff:ff:ff:ff
> vf 0 MAC 00:11:22:33:44:55, vlan 2, spoof checking on, link-state auto,
> trust off, query_rss off
> vf 1 MAC 00:11:22:33:44:55, vlan 1, spoof checking on, link-state auto,
> trust off, query_rss off
>#ens1f1 profile
> ethtool -i ens1f1
>driver: ixgbe
>version: 5.1.0-k
>firmware-version: 0x00015e0b
>expansion-rom-version:
>bus-info: 0000:03:00.1
>supports-statistics: yes
>supports-test: yes
>supports-eeprom-access: yes
>supports-register-dump: yes
>supports-priv-flags: yes
>
>
>#issue I met
>EAL: Selected IOVA mode 'PA'
>
>EAL: Probing VFIO support...
>
>EAL: VFIO support initialized
>
>EAL: PCI device 0000:03:10.1 on NUMA socket 0
>
>EAL: probe driver: 8086:10ed net_ixgbe_vf
>
>EAL: using IOMMU type 1 (Type 1)
>
>initializing port 0 for TX, drv=net_ixgbe_vf
>
>Port 0 MAC: 00 11 22 33 44 55
>
>Port 0: nb_rxd 4096 nb_txd 4096
>
>ixgbevf_dev_rx_init(): Set max packet length to 9600 failed.
>
>ixgbevf_dev_start(): Unable to initialize RX hardware (-22)
>
>
>
>Thanks,
>Thomas.
>
>
>
>
