To me it looks like you had some hardware switch to shut that wlan off. However, I do not see the problem with starting this iwn wifi card, I have also an iwn wifi, so I know, that the problems start when you try operating it. Like with 802.11n and so on.
On Wed, 13 Nov 2013 12:09:48 -0600 "Lanir W." <[email protected]> wrote: > Hi, > > I've been attempting to use an Intel Centrino Advanced-N 6235 on a > DragonFlyBSD box. I tried under 3.4 and 3.6 but I don't seem able to > bring up the interface. I tried module loading as you can see in the > dmesg below but that appears unnecessary and didn't change the > results I'm getting. I haven't altered the X86_64_GENERIC kernel > configuration. > > Is the iwn6000 firmware recent enough to work with the 6235? > > Thanks in advance for any help/info. > > Error message: > > dfly# ifconfig wlan create wlandev iwn0 > ifconfig: SIOCIFCREATE2: Device not configured > > Background info: > > dfly# pciconf -lv > ... > none6@pci0:4:0:0: class=0x028000 card=0x40608086 chip=0x088e8086 > rev=0x24 hdr=0x00 > vendor = 'Intel Corporation' > device = 'Centrino Advanced-N 6235' > class = network > > dfly# dmesg | grep iwn > interface iwn6000fw_fw.1 already present in the KLD 'kernel'! > module iwn4965fw_fw already present! > module iwn1000fw_fw already present! > module iwn5000fw_fw already present! > module iwn5150fw_fw already present! > module iwn6000fw_fw already present! > module_register: module pci/iwn already exists! > Module pci/iwn failed to register: 17 > module_register: module pci/iwn already exists! > Module pci/iwn failed to register: 17 > module_register: module pci/iwn already exists! > Module pci/iwn failed to register: 17 -- Lars Schotte @ bernadett.gusto 3.11.7-200.fc19.i686.PAE i686 GNU/Linux Claws Mail version 3.9.2
