On Thu, Mar 05, 2015 at 10:37:54AM +0100, Sascha Wildner wrote: > On Wed, 04 Mar 2015 08:29:47 +0100, Remi Locherer <[email protected]> > wrote: > > >Hi, > > > >I installed dragonfly on a server with a 2TB raid volume. The installer > >just used 500GB out of the 2TB. I could grow the slice and partition > >with fdisk and disklabel64. How can I grow hammer? > > You can't. > > >hurricane# fdisk da0 > >******* Working on device /dev/da0 ******* > >parameters extracted from device are: > >cylinders=242244 heads=256 sectors/track=63 (16128 blks/cyl) > > > >Figures below won't work with BIOS for partitions not in cyl 1 > >parameters to be used for BIOS calculations are: > >cylinders=242244 heads=256 sectors/track=63 (16128 blks/cyl) > > > >Media sector size is 512 > >Warning: BIOS sector numbering starts with sector 1 > >Information from DOS bootblock is: > >The data for partition 1 is: > >sysid 165,(DragonFly/FreeBSD/NetBSD/386BSD) > > start 63, size 3906911169 (1907671 Meg), flag 80 (active) > > beg: cyl 0/ head 1/ sector 1; > > end: cyl 1023/ head 255/ sector 63 > > Looks OK, 2TB here. > > ># /dev/da0s1: > ># > ># Informational fields calculated from the above > ># All byte equivalent offsets must be aligned > ># > ># boot space: 1044992 bytes > ># data space: 1953454555 blocks # 1907670.46 MB (2000337464832 bytes) > > 2TB here too. > > >16 partitions: > ># size offset fstype fsuuid > > a: 1048576 0 4.2BSD # 1024.000MB > > b: 1952404952 1048576 HAMMER # 1906645.461MB > > a-stor_uuid: f3b48ee3-9b47-11e4-ab34-012481a71e2c > > b-stor_uuid: f3b48f25-9b47-11e4-ab34-012481a71e2c > > This looks weird, it is showing a 1GB /boot and the rest seems to be > assigned to the 'b' partition. Did you remove or mess with swap in the > installer's partition configuration screen?
I removed swap in the installer and dedicated an SSD (da1) to swap after the installation. Remi
