On Mon, Mar 9, 2015 at 2:59 AM, George <[email protected]
<mailto:[email protected]>> wrote:
Hi guys,
I have the following question. I have an AsRock Vision 3D 137D
HTPC with i3 core and an NVidia GeForce 425 card.
I wish to use the system for a personal desktop and some
development etc.., the personal desktop is kind of a high
priority for this system for me.
I have managed to get a sort of decent, screen uses 1600x1200
instead of the 1920x1080 optimal fonts are streched etc. (I am
running XFCE), config for X see below:
# cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/OTF/"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "BX2235 23inch LCD"
HorizSync 31.469-79.976 <tel:31.469-79.976>
VertRefresh 56.250-75.029 <tel:56.250-75.029>
Modeline "1152x864_75.00" 104.00 1152 1224 1344
1536 864 867 871 905 -hsync +vsync
Modeline "1280x800_59.81" 83.25 1280 1352 1480
1680 800 803 809 831 -hsync +vsync
Modeline "1280x800_74.93" 106.25 1280 1360 1488
1696 800 803 809 838 -hsync +vsync
Modeline "1280x1024_60.02" 109.00 1280 1368 1496
1712 1024 1027 1034 1063 -hsync +vsync
Modeline "1280x1024_75.03" 138.75 1280 1368 1504
1728 1024 1027 1034 1072 -hsync +vsync
Modeline "1440x900_59.89" 106.25 1440 1528 1672 1904
900 903 909 934 -hsync +vsync
Modeline "1440x900_74.98" 136.50 1440 1536 1688
1936 900 903 909 942 -hsync +vsync
Modeline "1680x1200_60.00" 168.25 1680 1792 1968 2256
1200 1203 1213 1245 -hsync +vsync
Modeline "1680x1050_59.95" 146.00 1680 1784 1960 2240
1050 1053 1059 1089 -hsync +vsync
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576
1080 1083 1088 1120 -hsync +vsync
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1152x864_75.00" "1280x800_59.81"
"1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
"1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
"1680x1050_59.95" "1920x1080_60.00"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1152x864_75.00" "1280x800_59.81"
"1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
"1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
"1680x1050_59.95" "1920x1080_60.00"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1152x864_75.00" "1280x800_59.81"
"1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
"1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
"1680x1050_59.95" "1920x1080_60.00"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1152x864_75.00" "1280x800_59.81"
"1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
"1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
"1680x1050_59.95" "1920x1080_60.00"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1152x864_75.00" "1280x800_59.81"
"1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
"1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
"1680x1050_59.95" "1920x1080_60.00"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1152x864_75.00" "1280x800_59.81"
"1280x800_74.93" "1280x1024_60.02" "1280x1024_75.03"
"1440x900_59.89" "1440x900_74.98" "1680x1200_60.00"
"1680x1050_59.95" "1920x1080_60.00"
EndSubSection
EndSection
I tried also the "nv" NVidia??? driver but I get back "GeForce
425 not supported" the other drivers are ATI etc.. which will ot
work.
I have tried PC-BSD 10.1 release on the machine and it has an
NVidia driver which detects the card and everything looks OK on
the screen. DragonFly is a FreeBSD derivative just like PC-BSD. I
am wondering whether the driver has not been ported yet?? I have
used PC-BSD and it is very nice but it is kind of too slow
(compared to Ubuntu on the same machine) and I am having some
issues accessing an NetBSD NFS server it hangs with timeouts on
lockd ... anyway long story short. I decided to give DragonFly a
try and it is smocking fast to boot to shutdown to install
packages etc. ... if I could only get X setup it would be great.
Then I can move on to fighting HP printing etc. ;).
Here is a dmesg from the machine:
$ dmesg
Copyright (c) 2003-2014 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v4.0.3-RELEASE #27: Thu Jan 22 17:19:56 PST 2015
[email protected]:/usr/obj/build/home/justin/src/sys/X86_64_GENERIC
TSC invariant clock: 2409543436 <tel:2409543436> Hz, i8254 clock:
1193223 Hz
CPU: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz (2409.47-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x20655 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x9ae3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Thermal and PM Features=0x5<SENSOR,ARAT>
MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory = 6433078272 (6135 MB)
avail memory = 6023581696 <tel:6023581696> (5744 MB)
lapic: divisor index 0, frequency 66929700 Hz
Initialize MI interrupts
TSC testing MP synchronization ...
TSC is MP synchronized
TSC: cputimer freq 75296071, shift 5
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
disk scheduler: set policy of vn0 to noop
disk scheduler: set policy of vn1 to noop
disk scheduler: set policy of vn2 to noop
disk scheduler: set policy of vn3 to noop
disk scheduler: set policy of md0 to noop
md0: Malloc disk
ACPI: RSDP 0x00000000000F9EF0 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000D3770000 000044 (v01 102410 RSDT1223
20101024 MSFT 00000097)
ACPI: FACP 0x00000000D3770200 000084 (v01 A_M_I OEMFACP 12000601
MSFT 00000097)
ACPI: DSDT 0x00000000D3770460 0074A4 (v01 AS388 AS388115
00000115 INTL 20051117)
ACPI: FACS 0x00000000D3780000 000040
ACPI: APIC 0x00000000D3770390 00008C (v01 102410 APIC1223
20101024 MSFT 00000097)
ACPI: MCFG 0x00000000D3770420 00003C (v01 102410 OEMMCFG 20101024
MSFT 00000097)
ACPI: OEMB 0x00000000D3780040 000072 (v01 102410 OEMB1223
20101024 MSFT 00000097)
ACPI: AAFT 0x00000000D377A460 000027 (v01 102410 OEMAAFT 20101024
MSFT 00000097)
ACPI: HPET 0x00000000D377A490 000038 (v01 102410 OEMHPET 20101024
MSFT 00000097)
ACPI: ASF! 0x00000000D377A4D0 000099 (v32 LEGEND I865PASF
00000001 INTL 20051117)
ACPI: SSDT 0x00000000D37815F0 000363 (v01 DpgPmm CpuPm 00000012
INTL 20051117)
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
acpi0: <102410 RSDT1223> on motherboard
ACPI: All ACPI Tables successfully acquired
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
ACPI: Executed 1 blocks of module-level executable AML code
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem
0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: No _PRT found, routing with pci
pcib1: No _PRT found, routing with pci
vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem
0xd6000000-0xd7ffffff,0xd8000000-0xdfffffff,0xfa000000-0xfaffffff
irq 16 at device 0.0 on pci1
vgapci0: Boot video device
pci1: <multimedia, HDA> (vendor 0x10de, dev 0x0bea) at device 0.1
irq 17
pci0: <dasp> (vendor 0x8086, dev 0x0050) at device 4.0 irq 16
ehci0: <Intel PCH USB 2.0 controller USB-B> mem
0xf9ff8000-0xf9ff83ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x3b56) at device
27.0 irq 22
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xe800-0xe8ff
mem 0xf8ff8000-0xf8ffbfff,0xf8fff000-0xf8ffffff irq 16 at device
0.0 on pci2
re0: Hardware rev. 0x2c000000; PCI-E 125MHz
miibus0: <MII bus> on re0
rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT, 1000baseT-FDX, auto
usbus0: 480Mbps High Speed USB v2.0
re0: MAC address: e0:69:95:1f:6d:81
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci0: <NEC uPD720200 USB 3.0 controller> mem
0xfbdfe000-0xfbdfffff irq 17 at device 0.0 on pci3
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
usbus0
xhci0: 32 byte context size.
usbus1 on xhci0
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
ath0: <Atheros 9287> mem 0xfbef0000-0xfbefffff irq 18 at device
0.0 on pci4
usbus1: 5.0Gbps Super Speed USB v3.0
ugen1.1: <0x1033> at usbus1
uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1>
on usbus1
ath0: AR9287 mac 384.2 RF5133 phy 15.15
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
xhci1: <XHCI (generic) USB 3.0 controller> mem
0xfbff0000-0xfbffffff irq 19 at device 0.0 on pci5
xhci1: 32 byte context size.
usbus2 on xhci1
usbus2: 5.0Gbps Super Speed USB v3.0
ehci1: <Intel PCH USB 2.0 controller USB-A> mem
0xf9ff2000-0xf9ff23ff irq 23 at device 29.0 on pci0
usbus3: EHCI version 1.0
ugen2.1: <0x1b73> at usbus2
uhub2: <0x1b73 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1>
on usbus2
usbus3: <Intel PCH USB 2.0 controller USB-A> on ehci1
usbus3: 480Mbps High Speed USB v2.0
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ATA controller> port
0xc080-0xc08f,0xc400-0xc40f,0xc480-0xc483,0xc800-0xc807,0xc880-0xc883,0xcc00-0xcc07
irq 19 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci0
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
usbus3
disk scheduler: set policy of ad4 to noop
ad4: 953869MB <TOSHIBA MQ01ABD100 AX001A> at ata2-master UDMA33
ata3: <ATA channel 1> on atapci0
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x3b30) at device
31.3 irq 18
atapci1: <Intel ATA controller> port
0xb080-0xb08f,0xb400-0xb40f,0xb480-0xb483,0xb800-0xb807,0xb880-0xb883,0xbc00-0xbc07
irq 19 at device 31.5 on pci0
ata4: <ATA channel 0> on atapci1
uhub1: 4 ports with 4 removable, self powered
unknown: timeout waiting for read DRQ
unknown: timeout waiting for read DRQ
disk scheduler: set policy of acd0 to noop
acd0: DVDR <Slimtype DVD A DL8ATS/XAB2> at ata4-master UDMA33
ata5: <ATA channel 1> on atapci1
uhub3: 8 ports with 8 removable, self powered
acpi_button0: <Power Button> on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE03FACB600 001028 (v01 DpgPmm P001Ist 00000011
INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0B6167380 0004F4 (v01 PmRef P001Cst 00003001
INTL 20051117)
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: <ACPI CPU P-State> on cpu2
clockmod2: <CPU clock modulation> on cpu2
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: <ACPI CPU P-State> on cpu3
clockmod3: <CPU clock modulation> on cpu3
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
ACPI: Enabled 4 GPEs in block 00 to 3F
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
ugen3.2: <vendor 0x8087> at usbus3
uhub4: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00,
addr 2> on usbus3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
lm0: <Winbond W83627DHG Hardware Monitor> at port 0x290-0x297 on isa0
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: cannot reserve I/O port range
hpt27xx: no controller detected.
CAM: Configuring 4 busses
CAM: finished configuring all busses
disk scheduler: set policy of cd0 to noop
cd0 at ata2 bus 0 target 0 lun 0
cd0: <Slimtype DVD A DL8ATS XAB2> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not
present - tray open
uhub4: 8 ports with 8 removable, self powered
intr 19 on cpu3 at 40001/40000 hz, livelocked limit engaged!
ugen3.3: <vendor 0x05e3> at usbus3
uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/77.64, addr
3> on usbus3
uhub0: 6 ports with 6 removable, self powered
uhub5: 4 ports with 4 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub6: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00,
addr 2> on usbus0
ugen3.4: <vendor 0x05e3> at usbus3
uhub7: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/77.64, addr
4> on usbus3
uhub6: 6 ports with 6 removable, self powered
uhub7: 4 ports with 4 removable, self powered
ugen0.3: <Logitech> at usbus0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3>
on usbus0
kbd2 at ukbd0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3>
on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3>
on usbus0
ugen3.5: <vendor 0x05e3> at usbus3
uhub8: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr
5> on usbus3
uhub8: 4 ports with 4 removable, self powered
no B_DEVMAGIC (bootdev=0)
ugen3.6: <vendor 0x05e3> at usbus3
uhub9: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr
6> on usbus3
uhub9: 4 ports with 4 removable, self powered
ugen3.7: <HP> at usbus3
umass0: <HP Photosmart B110 series, class 0/0, rev 2.00/1.00,
addr 7> on usbus3
disk scheduler: set policy of da8 to noop
da8 at umass-sim0 bus 0 target 0 lun 0
da8: <HP Photosmart B110 1.00> Removable Direct Access SCSI-5 device
da8: 40.000MB/s transfers
da8: Attempt to query device size failed: NOT READY, Medium not
present
Mounting root from hammer:serno/23BBPJN0T.s1d
HAMMER(ROOT) recovery check seqno=00233441
HAMMER(ROOT) recovery range 300000000a56b9d8-300000000a56b9d8
HAMMER(ROOT) recovery nexto 300000000a56b9d8 endseqno=00233442
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 12416k, remaining available: 16384k
Mounting devfs
ugen3.8: <vendor 0x05e3> at usbus3
uhub10: <vendor 0x05e3 USB Hub 2.0, class 9/0, rev 2.00/7.02,
addr 8> on usbus3
uhub10: 4 ports with 4 removable, self powered
ugen3.9: <Prolific Technology Inc.> at usbus3
ugen3.10: <Prolific Technology Inc.> at usbus3
ugen3.11: <Logitech> at usbus3
ums1: <Logitech USB-PS2 Optical Mouse, class 0/0, rev 2.00/27.30,
addr 11> on usbus3
ums1: 8 buttons and [XYZT] coordinates ID=0
ugen3.12: <Darfon> at usbus3
ukbd1: <Darfon USB Combo Keyboard, class 0/0, rev 1.10/2.02, addr
12> on usbus3
kbd3 at ukbd1
uhid1: <Darfon USB Combo Keyboard, class 0/0, rev 1.10/2.02, addr
12> on usbus3
ulpt0: <HP Photosmart B110 series, class 0/0, rev 2.00/1.00, addr
7> on usbus3
ulpt0: using bi-directional mode
ucom init
uplcom0: <Prolific Technology Inc. USB-Serial Controller, class
0/0, rev 1.10/3.00, addr 10> on usbus3
attach tty
malloc:
uplcom1: <Prolific Technology Inc. USB-Serial Controller, class
0/0, rev 1.10/3.00, addr 9> on usbus3
attach tty
malloc:
ugen3.11: <Logitech> at usbus3 (disconnected)
ums1: at uhub4, port 4, addr 11 (disconnected)
ums1: detached
ugen3.12: <Darfon> at usbus3 (disconnected)
ukbd1: at uhub4, port 5, addr 12 (disconnected)
ukbd1: detached
uhid1: at uhub4, port 5, addr 12 (disconnected)
uhid1: detached
If someone can give me a pointer from what I have provided here
that would be great.
Thank you for making DragonFly!
Cheers,
George
--
Sincerely,
Zachary Crownover
