Hello All,
The simulation is running for about 23 hours, and the warning below is showing up repeatedly. Is it normal ? I saw in archived emails about CarpetRegrid2 Warnings, that Erik mentioned that : "Carpet attempts to do so ten times, then gives up assuming there is an internal inconsistency" But here it is still processing. and the warning had shown up for about a hundred times! WARNING level 1 from host compute-0-46.local process 0 while executing schedule bin (none), routine (no thorn)::(no routine) in thorn CarpetRegrid2, file /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/CarpetRegrid2/regrid.cc:390: -> Could not enforce grid structure properties in this round, starting another round INFO (CarpetRegrid2): Enforcing grid structure properties, iteration 2 WARNING level 1 from host compute-0-46.local process 0 while executing schedule bin (none), routine (no thorn)::(no routine) in thorn CarpetRegrid2, file /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/CarpetRegrid2/regrid.cc:390: -> Could not enforce grid structure properties in this round, starting another round WARNING level 1 from host compute-0-46.local process 1 while executing schedule bin (none), routine (no thorn)::(no routine) in thorn CarpetRegrid2, file /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/CarpetRegrid2/regrid.cc:390: -> Could not enforce grid structure properties in this round, starting another round --------------------------- Hassan Khalvati Master Student Department of Physics Sharif University of Technology Tehran, Azadi hassan.khalv...@physics.sharif.edu > Dear Roland > Thank you for your prompt response. > The simulation is still going on and there is no level 0 warning. > > > > > > > > > > > > >> Hello Hassan, >> >> all warnings that are level 1 and higher can be ignored (high level >> means a lower priority warning). >> >> Only level 0 are actually errors. Level 2 and higher are usually "stuff >> that we'd want to let you know but that will not cause any averse >> effects", such as the " No HDF5 checkpoint files with basefilename >> 'checkpoint.chkpt' found" that is output for the first segment of a >> simulation. >> >> The one "Could not register parameter change monitor for >> 'signal_numbers'" is a bit more puzzling since this should not happen >> (it >> is perfectly harmless though). >> >> Does your simulation actually proceed or does it abort with a level 0 >> warning or similar issue? >> >> Yours, >> Roland >> >>> Dear all, >>> >>> I need some guidance on reproducing the NsNsToHMNS which is provided in >>> the gallery section of ET's website. >>> but there are a bunch of warnings during the simulation. >>> >>> I would be grateful if anyone could possibly tell me what is the >>> minimum >>> limit on core numbers for the NsNs and also check the warnings below. >>> >>> I tried with 4 procs at first , but now I am trying on 28 procs. but >>> there are same warnings. >>> I don't know if I have to take them serious or not ! >>> Because even with these warnings, the simulation is still running... >>> >>> >>> Gratefully, >>> Hassan >>> >>> >>> >>> >>> *****Here are all warnings***** : >>> >>> >>> Warning: thorn CoordBase already scheduled for activation >>> >>> >>> >>> WARNING level 3 from host compute-0-46.local process 0 >>> while executing schedule bin (none), routine (no thorn)::(no routine) >>> in thorn IOUtil, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/IOUtil/CheckpointRecovery.cc:730: >>> -> No HDF5 checkpoint files with basefilename 'checkpoint.chkpt' >>> found >>> in recovery directory 'NsNs' >>> >>> >>> >>> >>> >>> >>> Formaline::Formaline_RegisterWarnings: [meta] Register to receive >>> warnings >>> and info messages from the flesh >>> >>> >>> >>> >>> >>> WARNING level 3 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_STARTUP, routine >>> TerminationTrigger::TerminationTrigger_StartSignalHandler >>> in thorn TerminationTrigger, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/TerminationTrigger/signal.c:64: >>> -> Could not register parameter change monitor for 'signal_numbers' >>> INFO (Vectors): Using vector size 2 for architecture SSE2 (64-bit >>> precision) >>> >>> >>> >>> >>> >>> >>> INFO (Formaline): Writing tarballs with the Cactus sources into the >>> directory "NsNs/cactus-source" >>> WARNING level 1 from host compute-0-46.local process 1 >>> while executing schedule bin CCTK_WRAGH, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCompat >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:15: >>> -> Forcing ML_BSSN::initial_boundary_condition="extrapolate-gammas" >>> because ML_BSSN::my_initial_boundary_condition="extrapolate-gammas" >>> WARNING level 1 from host compute-0-46.local process 1 >>> while executing schedule bin CCTK_WRAGH, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCompat >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:28: >>> -> Forcing ML_BSSN::rhs_boundary_condition="NewRad" because >>> ML_BSSN::my_rhs_boundary_condition="NewRad" >>> WARNING level 1 from host compute-0-46.local process 1 >>> while executing schedule bin CCTK_WRAGH, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCompat >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:47: >>> -> Forcing ML_BSSN::epsDiss=0.0 because >>> ML_BSSN::apply_dissipation="never" >>> WARNING level 1 from host compute-0-46.local process 1 >>> while executing schedule bin CCTK_WRAGH, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCompat >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:116: >>> -> Forcing ML_BSSN::advectLapse=1 because >>> ML_BSSN::LapseAdvectionCoeff=1.0 >>> WARNING level 1 from host compute-0-46.local process 1 >>> while executing schedule bin CCTK_WRAGH, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCompat >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:134: >>> -> Forcing ML_BSSN::advectShift=1 because >>> ML_BSSN::ShiftAdvectionCoeff=1.0 >>> WARNING level 1 from host compute-0-46.local process 1 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:150: >>> -> Parameter ML_BSSN::my_initial_data is outdated; please update the >>> parameter file. Do not use this parameter, and set up initial >>> conditions >>> via ADMBase as usual. >>> WARNING level 1 from host compute-0-46.local process 1 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:157: >>> -> Parameter ML_BSSN::my_initial_boundary_condition is outdated; >>> please >>> update the parameter file. Do not use this parameter, and set up >>> initial >>> boundary conditions as usual. >>> WARNING level 1 from host compute-0-46.local process 1 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:164: >>> -> Parameter ML_BSSN::my_rhs_boundary_condition is outdated; please >>> update the parameter file. Do not use this parameter, and set up RHS >>> boundary conditions as usual. >>> WARNING level 1 from host compute-0-46.local process 1 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:171: >>> -> Parameter ML_BSSN::my_boundary_condition is outdated; please >>> update >>> the parameter file. Do not use this parameter, and set up RHS boundary >>> conditions as usual. >>> WARNING level 1 from host compute-0-46.local process 1 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:198: >>> -> Parameter ML_BSSN::LapseAdvectionCoeff is outdated; please update >>> the >>> parameter file. Instead of using this parameter, you should set >>> ML_BSSN::advectLapse. >>> WARNING level 1 from host compute-0-46.local process 1 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:204: >>> -> Parameter ML_BSSN::ShiftAdvectionCoeff is outdated; please update >>> the >>> parameter file. Instead of using this parameter, you should set >>> ML_BSSN::advectShift. >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_WRAGH, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCompat >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:15: >>> -> Forcing ML_BSSN::initial_boundary_condition="extrapolate-gammas" >>> because ML_BSSN::my_initial_boundary_condition="extrapolate-gammas" >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_WRAGH, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCompat >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:28: >>> -> Forcing ML_BSSN::rhs_boundary_condition="NewRad" because >>> ML_BSSN::my_rhs_boundary_condition="NewRad" >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_WRAGH, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCompat >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:47: >>> -> Forcing ML_BSSN::epsDiss=0.0 because >>> ML_BSSN::apply_dissipation="never" >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_WRAGH, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCompat >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:15: >>> -> Forcing ML_BSSN::initial_boundary_condition="extrapolate-gammas" >>> because ML_BSSN::my_initial_boundary_condition="extrapolate-gammas" >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_WRAGH, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCompat >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:28: >>> -> Forcing ML_BSSN::rhs_boundary_condition="NewRad" because >>> ML_BSSN::my_rhs_boundary_condition="NewRad" >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_WRAGH, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCompat >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:47: >>> -> Forcing ML_BSSN::epsDiss=0.0 because >>> ML_BSSN::apply_dissipation="never" >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_WRAGH, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCompat >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:116: >>> -> Forcing ML_BSSN::advectLapse=1 because >>> ML_BSSN::LapseAdvectionCoeff=1.0 >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_WRAGH, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCompat >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:116: >>> -> Forcing ML_BSSN::advectLapse=1 because >>> ML_BSSN::LapseAdvectionCoeff=1.0 >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_WRAGH, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCompat >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:134: >>> -> Forcing ML_BSSN::advectShift=1 because >>> ML_BSSN::ShiftAdvectionCoeff=1.0 >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_WRAGH, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCompat >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:134: >>> -> Forcing ML_BSSN::advectShift=1 because >>> ML_BSSN::ShiftAdvectionCoeff=1.0 >>> INFO (MoL): Using Runge-Kutta 4 as the time integrator. >>> INFO (SymBase): Symmetry on lower x-face: rotating_symmetry_180 >>> INFO (SymBase): Symmetry on lower z-face: reflection_symmetry >>> INFO (MoL): The maximum number of evolved variables is 1250. 30 are >>> registered. >>> INFO (MoL): The maximum number of slow evolved variables is 1250. 0 are >>> registered. >>> INFO (MoL): The maximum number of constrained variables is 1250. 37 are >>> registered. >>> INFO (MoL): The maximum number of SandR variables is 1250. 0 are >>> registered. >>> INFO (MoL): The maximum number of evolved array variables is 1250. 0 >>> are >>> registered. >>> INFO (MoL): The maximum number of constrained array variables is 1250. >>> 0 >>> are registered. >>> INFO (MoL): The maximum number of SandR array variables is 1250. 0 are >>> registered. >>> INFO (MoL): The maximum size of any array variables is 0. >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:150: >>> -> Parameter ML_BSSN::my_initial_data is outdated; please update the >>> parameter file. Do not use this parameter, and set up initial >>> conditions >>> via ADMBase as usual. >>> WARNING level 1 from host compute-0-46.local process 0 >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:150: >>> -> Parameter ML_BSSN::my_initial_data is outdated; please update the >>> parameter file. Do not use this parameter, and set up initial >>> conditions >>> via ADMBase as usual. >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:157: >>> -> Parameter ML_BSSN::my_initial_boundary_condition is outdated; >>> please >>> update the parameter file. Do not use this parameter, and set up >>> initial >>> boundary conditions as usual. >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:164: >>> -> Parameter ML_BSSN::my_rhs_boundary_condition is outdated; please >>> update the parameter file. Do not use this parameter, and set up RHS >>> boundary conditions as usual. >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:171: >>> -> Parameter ML_BSSN::my_boundary_condition is outdated; please >>> update >>> the parameter file. Do not use this parameter, and set up RHS boundary >>> conditions as usual. >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:198: >>> -> Parameter ML_BSSN::LapseAdvectionCoeff is outdated; please update >>> the >>> parameter file. Instead of using this parameter, you should set >>> ML_BSSN::advectLapse. >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:204: >>> -> Parameter ML_BSSN::ShiftAdvectionCoeff is outdated; please update >>> the >>> parameter file. Instead of using this parameter, you should set >>> ML_BSSN::advectShift. >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:157: >>> -> Parameter ML_BSSN::my_initial_boundary_condition is outdated; >>> please >>> update the parameter file. Do not use this parameter, and set up >>> initial >>> boundary conditions as usual. >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:164: >>> -> Parameter ML_BSSN::my_rhs_boundary_condition is outdated; please >>> update the parameter file. Do not use this parameter, and set up RHS >>> boundary conditions as usual. >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:171: >>> -> Parameter ML_BSSN::my_boundary_condition is outdated; please >>> update >>> the parameter file. Do not use this parameter, and set up RHS boundary >>> conditions as usual. >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:198: >>> -> Parameter ML_BSSN::LapseAdvectionCoeff is outdated; please update >>> the >>> parameter file. Instead of using this parameter, you should set >>> ML_BSSN::advectLapse. >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_PARAMCHECK, routine >>> ML_BSSN_Helper::ML_BSSN_ParamCheck >>> in thorn ML_BSSN_Helper, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:204: >>> -> Parameter ML_BSSN::ShiftAdvectionCoeff is outdated; please update >>> the >>> parameter file. Instead of using this parameter, you should set >>> ML_BSSN::advectShift. >>> >>> >>> >>> >>> >>> >>> >>> >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin Hydro_Analysis_LocationSearch, routine >>> Hydro_Analysis::Hydro_Analysis_LocationSearch_Combine >>> in thorn Hydro_Analysis, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/Hydro_Analysis/Hydro_Analysis.c:199: >>> -> Found more than one (2) identical maximum, using average location >>> (15.1875,0,0). >>> WARNING level 1 from host compute-0-46.local process 1 >>> while executing schedule bin Hydro_Analysis_LocationSearch, routine >>> Hydro_Analysis::Hydro_Analysis_LocationSearch_Combine >>> in thorn Hydro_Analysis, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/Hydro_Analysis/Hydro_Analysis.c:199: >>> -> Found more than one (2) identical maximum, using average location >>> (15.1875,0,0). >>> WARNING level 1 from host compute-0-46.local process 0 >>> while executing schedule bin Hydro_Analysis_LocationSearch, routine >>> Hydro_Analysis::Hydro_Analysis_LocationSearch_Combine >>> in thorn Hydro_Analysis, file >>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/Hydro_Analysis/Hydro_Analysis.c:199: >>> -> Found more than one (2) identical maximum, using average location >>> (15.1875,0,0). >>> INFO (NSTracker): Found star at (15.1875,0,0) >>> INFO (CarpetIOHDF5): >>> --------------------------------------------------------- >>> INFO (CarpetIOHDF5): Dumping initial checkpoint at iteration 0, >>> simulation >>> time 0 >>> INFO (CarpetIOHDF5): >>> --------------------------------------------------------- >>> WARNING level 2 from host compute-0-46.local process 0 >>> while executing schedule bin CCTK_ANALYSIS, routine >>> QuasiLocalMeasures::qlm_calculate >>> in thorn QuasiLocalMeasures, file qlm_calculate.F90:130: >>> -> There were not enough past time levels available for accurate >>> calculations >>> INFO (TimerReport): Timer Report at iteration 0 time 0 >>> INFO (TimerReport): Top timers at iteration 0 time 0 >>> >>> >>> >>> >>> >>> ----------------------------------- >>> Hassan Khalvati >>> Master Student >>> Department of Physics >>> Sharif University of Technology >>> Tehran, Azadi >>> hassan.khalv...@physics.sharif.edu >>> >>> >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users@einsteintoolkit.org >>> http://lists.einsteintoolkit.org/mailman/listinfo/users >> >> >> >> -- >> My email is as private as my paper mail. I therefore support encrypting >> and signing email messages. Get my PGP key from http://pgp.mit.edu . >> > > _______________________________________________ > Users mailing list > Users@einsteintoolkit.org > http://lists.einsteintoolkit.org/mailman/listinfo/users > _______________________________________________ Users mailing list Users@einsteintoolkit.org http://lists.einsteintoolkit.org/mailman/listinfo/users