Dear Roland Thank you for your prompt response. The simulation is still going on and there is no level 0 warning.
> On Oct 24, 2018, at 7:16 PM, Roland Haas <[email protected]> wrote: > > Hello Hassan, > > all warnings that are level 1 and higher can be ignored (high level > means a lower priority warning). > > Only level 0 are actually errors. Level 2 and higher are usually "stuff > that we'd want to let you know but that will not cause any averse > effects", such as the " No HDF5 checkpoint files with basefilename > 'checkpoint.chkpt' found" that is output for the first segment of a > simulation. > > The one "Could not register parameter change monitor for > 'signal_numbers'" is a bit more puzzling since this should not happen (it is > perfectly harmless though). > > Does your simulation actually proceed or does it abort with a level 0 > warning or similar issue? > > Yours, > Roland > >> Dear all, >> >> I need some guidance on reproducing the NsNsToHMNS which is provided in >> the gallery section of ET's website. >> but there are a bunch of warnings during the simulation. >> >> I would be grateful if anyone could possibly tell me what is the minimum >> limit on core numbers for the NsNs and also check the warnings below. >> >> I tried with 4 procs at first , but now I am trying on 28 procs. but >> there are same warnings. >> I don't know if I have to take them serious or not ! >> Because even with these warnings, the simulation is still running... >> >> >> Gratefully, >> Hassan >> >> >> >> >> *****Here are all warnings***** : >> >> >> Warning: thorn CoordBase already scheduled for activation >> >> >> >> WARNING level 3 from host compute-0-46.local process 0 >> while executing schedule bin (none), routine (no thorn)::(no routine) >> in thorn IOUtil, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/IOUtil/CheckpointRecovery.cc:730: >> -> No HDF5 checkpoint files with basefilename 'checkpoint.chkpt' found >> in recovery directory 'NsNs' >> >> >> >> >> >> >> Formaline::Formaline_RegisterWarnings: [meta] Register to receive warnings >> and info messages from the flesh >> >> >> >> >> >> WARNING level 3 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_STARTUP, routine >> TerminationTrigger::TerminationTrigger_StartSignalHandler >> in thorn TerminationTrigger, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/TerminationTrigger/signal.c:64: >> -> Could not register parameter change monitor for 'signal_numbers' >> INFO (Vectors): Using vector size 2 for architecture SSE2 (64-bit precision) >> >> >> >> >> >> >> INFO (Formaline): Writing tarballs with the Cactus sources into the >> directory "NsNs/cactus-source" >> WARNING level 1 from host compute-0-46.local process 1 >> while executing schedule bin CCTK_WRAGH, routine >> ML_BSSN_Helper::ML_BSSN_ParamCompat >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:15: >> -> Forcing ML_BSSN::initial_boundary_condition="extrapolate-gammas" >> because ML_BSSN::my_initial_boundary_condition="extrapolate-gammas" >> WARNING level 1 from host compute-0-46.local process 1 >> while executing schedule bin CCTK_WRAGH, routine >> ML_BSSN_Helper::ML_BSSN_ParamCompat >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:28: >> -> Forcing ML_BSSN::rhs_boundary_condition="NewRad" because >> ML_BSSN::my_rhs_boundary_condition="NewRad" >> WARNING level 1 from host compute-0-46.local process 1 >> while executing schedule bin CCTK_WRAGH, routine >> ML_BSSN_Helper::ML_BSSN_ParamCompat >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:47: >> -> Forcing ML_BSSN::epsDiss=0.0 because ML_BSSN::apply_dissipation="never" >> WARNING level 1 from host compute-0-46.local process 1 >> while executing schedule bin CCTK_WRAGH, routine >> ML_BSSN_Helper::ML_BSSN_ParamCompat >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:116: >> -> Forcing ML_BSSN::advectLapse=1 because ML_BSSN::LapseAdvectionCoeff=1.0 >> WARNING level 1 from host compute-0-46.local process 1 >> while executing schedule bin CCTK_WRAGH, routine >> ML_BSSN_Helper::ML_BSSN_ParamCompat >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:134: >> -> Forcing ML_BSSN::advectShift=1 because ML_BSSN::ShiftAdvectionCoeff=1.0 >> WARNING level 1 from host compute-0-46.local process 1 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:150: >> -> Parameter ML_BSSN::my_initial_data is outdated; please update the >> parameter file. Do not use this parameter, and set up initial conditions >> via ADMBase as usual. >> WARNING level 1 from host compute-0-46.local process 1 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:157: >> -> Parameter ML_BSSN::my_initial_boundary_condition is outdated; please >> update the parameter file. Do not use this parameter, and set up initial >> boundary conditions as usual. >> WARNING level 1 from host compute-0-46.local process 1 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:164: >> -> Parameter ML_BSSN::my_rhs_boundary_condition is outdated; please >> update the parameter file. Do not use this parameter, and set up RHS >> boundary conditions as usual. >> WARNING level 1 from host compute-0-46.local process 1 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:171: >> -> Parameter ML_BSSN::my_boundary_condition is outdated; please update >> the parameter file. Do not use this parameter, and set up RHS boundary >> conditions as usual. >> WARNING level 1 from host compute-0-46.local process 1 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:198: >> -> Parameter ML_BSSN::LapseAdvectionCoeff is outdated; please update the >> parameter file. Instead of using this parameter, you should set >> ML_BSSN::advectLapse. >> WARNING level 1 from host compute-0-46.local process 1 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:204: >> -> Parameter ML_BSSN::ShiftAdvectionCoeff is outdated; please update the >> parameter file. Instead of using this parameter, you should set >> ML_BSSN::advectShift. >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_WRAGH, routine >> ML_BSSN_Helper::ML_BSSN_ParamCompat >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:15: >> -> Forcing ML_BSSN::initial_boundary_condition="extrapolate-gammas" >> because ML_BSSN::my_initial_boundary_condition="extrapolate-gammas" >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_WRAGH, routine >> ML_BSSN_Helper::ML_BSSN_ParamCompat >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:28: >> -> Forcing ML_BSSN::rhs_boundary_condition="NewRad" because >> ML_BSSN::my_rhs_boundary_condition="NewRad" >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_WRAGH, routine >> ML_BSSN_Helper::ML_BSSN_ParamCompat >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:47: >> -> Forcing ML_BSSN::epsDiss=0.0 because ML_BSSN::apply_dissipation="never" >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_WRAGH, routine >> ML_BSSN_Helper::ML_BSSN_ParamCompat >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:15: >> -> Forcing ML_BSSN::initial_boundary_condition="extrapolate-gammas" >> because ML_BSSN::my_initial_boundary_condition="extrapolate-gammas" >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_WRAGH, routine >> ML_BSSN_Helper::ML_BSSN_ParamCompat >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:28: >> -> Forcing ML_BSSN::rhs_boundary_condition="NewRad" because >> ML_BSSN::my_rhs_boundary_condition="NewRad" >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_WRAGH, routine >> ML_BSSN_Helper::ML_BSSN_ParamCompat >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:47: >> -> Forcing ML_BSSN::epsDiss=0.0 because ML_BSSN::apply_dissipation="never" >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_WRAGH, routine >> ML_BSSN_Helper::ML_BSSN_ParamCompat >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:116: >> -> Forcing ML_BSSN::advectLapse=1 because ML_BSSN::LapseAdvectionCoeff=1.0 >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_WRAGH, routine >> ML_BSSN_Helper::ML_BSSN_ParamCompat >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:116: >> -> Forcing ML_BSSN::advectLapse=1 because ML_BSSN::LapseAdvectionCoeff=1.0 >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_WRAGH, routine >> ML_BSSN_Helper::ML_BSSN_ParamCompat >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:134: >> -> Forcing ML_BSSN::advectShift=1 because ML_BSSN::ShiftAdvectionCoeff=1.0 >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_WRAGH, routine >> ML_BSSN_Helper::ML_BSSN_ParamCompat >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:134: >> -> Forcing ML_BSSN::advectShift=1 because ML_BSSN::ShiftAdvectionCoeff=1.0 >> INFO (MoL): Using Runge-Kutta 4 as the time integrator. >> INFO (SymBase): Symmetry on lower x-face: rotating_symmetry_180 >> INFO (SymBase): Symmetry on lower z-face: reflection_symmetry >> INFO (MoL): The maximum number of evolved variables is 1250. 30 are >> registered. >> INFO (MoL): The maximum number of slow evolved variables is 1250. 0 are >> registered. >> INFO (MoL): The maximum number of constrained variables is 1250. 37 are >> registered. >> INFO (MoL): The maximum number of SandR variables is 1250. 0 are registered. >> INFO (MoL): The maximum number of evolved array variables is 1250. 0 are >> registered. >> INFO (MoL): The maximum number of constrained array variables is 1250. 0 >> are registered. >> INFO (MoL): The maximum number of SandR array variables is 1250. 0 are >> registered. >> INFO (MoL): The maximum size of any array variables is 0. >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:150: >> -> Parameter ML_BSSN::my_initial_data is outdated; please update the >> parameter file. Do not use this parameter, and set up initial conditions >> via ADMBase as usual. >> WARNING level 1 from host compute-0-46.local process 0 >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:150: >> -> Parameter ML_BSSN::my_initial_data is outdated; please update the >> parameter file. Do not use this parameter, and set up initial conditions >> via ADMBase as usual. >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:157: >> -> Parameter ML_BSSN::my_initial_boundary_condition is outdated; please >> update the parameter file. Do not use this parameter, and set up initial >> boundary conditions as usual. >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:164: >> -> Parameter ML_BSSN::my_rhs_boundary_condition is outdated; please >> update the parameter file. Do not use this parameter, and set up RHS >> boundary conditions as usual. >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:171: >> -> Parameter ML_BSSN::my_boundary_condition is outdated; please update >> the parameter file. Do not use this parameter, and set up RHS boundary >> conditions as usual. >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:198: >> -> Parameter ML_BSSN::LapseAdvectionCoeff is outdated; please update the >> parameter file. Instead of using this parameter, you should set >> ML_BSSN::advectLapse. >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:204: >> -> Parameter ML_BSSN::ShiftAdvectionCoeff is outdated; please update the >> parameter file. Instead of using this parameter, you should set >> ML_BSSN::advectShift. >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:157: >> -> Parameter ML_BSSN::my_initial_boundary_condition is outdated; please >> update the parameter file. Do not use this parameter, and set up initial >> boundary conditions as usual. >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:164: >> -> Parameter ML_BSSN::my_rhs_boundary_condition is outdated; please >> update the parameter file. Do not use this parameter, and set up RHS >> boundary conditions as usual. >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:171: >> -> Parameter ML_BSSN::my_boundary_condition is outdated; please update >> the parameter file. Do not use this parameter, and set up RHS boundary >> conditions as usual. >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:198: >> -> Parameter ML_BSSN::LapseAdvectionCoeff is outdated; please update the >> parameter file. Instead of using this parameter, you should set >> ML_BSSN::advectLapse. >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_PARAMCHECK, routine >> ML_BSSN_Helper::ML_BSSN_ParamCheck >> in thorn ML_BSSN_Helper, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:204: >> -> Parameter ML_BSSN::ShiftAdvectionCoeff is outdated; please update the >> parameter file. Instead of using this parameter, you should set >> ML_BSSN::advectShift. >> >> >> >> >> >> >> >> >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin Hydro_Analysis_LocationSearch, routine >> Hydro_Analysis::Hydro_Analysis_LocationSearch_Combine >> in thorn Hydro_Analysis, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/Hydro_Analysis/Hydro_Analysis.c:199: >> -> Found more than one (2) identical maximum, using average location >> (15.1875,0,0). >> WARNING level 1 from host compute-0-46.local process 1 >> while executing schedule bin Hydro_Analysis_LocationSearch, routine >> Hydro_Analysis::Hydro_Analysis_LocationSearch_Combine >> in thorn Hydro_Analysis, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/Hydro_Analysis/Hydro_Analysis.c:199: >> -> Found more than one (2) identical maximum, using average location >> (15.1875,0,0). >> WARNING level 1 from host compute-0-46.local process 0 >> while executing schedule bin Hydro_Analysis_LocationSearch, routine >> Hydro_Analysis::Hydro_Analysis_LocationSearch_Combine >> in thorn Hydro_Analysis, file >> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/Hydro_Analysis/Hydro_Analysis.c:199: >> -> Found more than one (2) identical maximum, using average location >> (15.1875,0,0). >> INFO (NSTracker): Found star at (15.1875,0,0) >> INFO (CarpetIOHDF5): >> --------------------------------------------------------- >> INFO (CarpetIOHDF5): Dumping initial checkpoint at iteration 0, simulation >> time 0 >> INFO (CarpetIOHDF5): >> --------------------------------------------------------- >> WARNING level 2 from host compute-0-46.local process 0 >> while executing schedule bin CCTK_ANALYSIS, routine >> QuasiLocalMeasures::qlm_calculate >> in thorn QuasiLocalMeasures, file qlm_calculate.F90:130: >> -> There were not enough past time levels available for accurate >> calculations >> INFO (TimerReport): Timer Report at iteration 0 time 0 >> INFO (TimerReport): Top timers at iteration 0 time 0 >> >> >> >> >> >> ----------------------------------- >> Hassan Khalvati >> Master Student >> Department of Physics >> Sharif University of Technology >> Tehran, Azadi >> [email protected] >> >> >> >> >> >> >> >> >> _______________________________________________ >> Users mailing list >> [email protected] >> http://lists.einsteintoolkit.org/mailman/listinfo/users > > > > -- > My email is as private as my paper mail. I therefore support encrypting > and signing email messages. Get my PGP key from http://pgp.mit.edu . _______________________________________________ Users mailing list [email protected] http://lists.einsteintoolkit.org/mailman/listinfo/users
