It's a virtual machine. I want to install the qmaster and the execcd in the
same machine. 192.168.56.101 is connected with the outside world!
ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:27:F3:80:43
inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fef3:8043/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1635 errors:0 dropped:0 overruns:0 frame:0
TX packets:1506 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1390858 (1.3 MiB) TX bytes:104832 (102.3 KiB)
eth1 Link encap:Ethernet HWaddr 08:00:27:14:C4:0C
inet addr:192.168.56.101 Bcast:192.168.56.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe14:c40c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1805 errors:0 dropped:0 overruns:0 frame:0
TX packets:1152 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:162007 (158.2 KiB) TX bytes:186807 (182.4 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:92 errors:0 dropped:0 overruns:0 frame:0
TX packets:92 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4600 (4.4 KiB) TX bytes:4600 (4.4 KiB)
2011/7/7 Reuti <[email protected]>
> Am 07.07.2011 um 19:27 schrieb Carlos Scaloni:
>
> > Hi, thanks for answering!
> >
> > I have a file in /tmp called sge_messages with this content:
> >
> > 07/07/2011 18:59:41| main|proyecto-192|C|abort qmaster startup due to
> communication errors
>
> Well, you listed the complete /etc/hosts - i.e. no 127.0.0.2 is present
> (i.e. no entry for it is good)?
>
> What is the primary interface in the master node? As I see two entries I
> assume you have at least two network interfaces, and one of them is
> connected to the outside world, the other to the nodes. Maybe it's
> addressing the cluster on the wrong one.
>
> -- Reuti
>
>
> > 2011/7/7 Reuti <[email protected]>
> > Hi,
> >
> > Am 07.07.2011 um 19:11 schrieb Carlos Scaloni:
> >
> > > Hi friends! I can't install SGE, I need your help, please. Thanks a lot
> in advance!
> > >
> > > Options I chose:
> > >
> > > admin user is sgeadmin
> > > set network ports with environment
> > > sge_qmaster port 6444
> > > sge_execd port 6445
> > > say no to pkgadd and verify permissions
> > > classic spooling, not berkeley db
> > > gid range 20000-21000
> > > enter list of execution hosts node01 thru node##
> >
> > did you get any error log in /tmp?
> >
> > -- Reuti
> >
> >
> > > Error:
> > >
> > > Grid Engine qmaster startup
> > > ---------------------------
> > >
> > > Starting qmaster daemon. Please wait ...
> > > starting sge_qmaster
> > >
> > > sge_qmaster start problem
> > >
> > > sge_qmaster didn't start!
> > > sge_qmaster start problem
> > >
> > > cat /etc/hosts
> > >
> > > 127.0.0.1 localhost localhost.localdomain localhost4
> localhost4.localdomain4
> > > ::1 localhost
> > > 192.168.56.101 proyecto-192.local
> > > 10.0.2.15 proyecto-10.local
> > >
> > >
> > > _______________________________________________
> > > users mailing list
> > > [email protected]
> > > https://gridengine.org/mailman/listinfo/users
> >
> >
> >
> > _______________________________________________
> > users mailing list
> > [email protected]
> > https://gridengine.org/mailman/listinfo/users
>
>
_______________________________________________
users mailing list
[email protected]
https://gridengine.org/mailman/listinfo/users
