Am 07.07.2011 um 19:44 schrieb Carlos Scaloni: > It's a virtual machine. I want to install the qmaster and the execcd in the > same machine. 192.168.56.101 is connected with the outside world! > > ifconfig > eth0 Link encap:Ethernet HWaddr 08:00:27:F3:80:43 > inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 > inet6 addr: fe80::a00:27ff:fef3:8043/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:1635 errors:0 dropped:0 overruns:0 frame:0 > TX packets:1506 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:1390858 (1.3 MiB) TX bytes:104832 (102.3 KiB)
Okay, so this is the main interface and the ones which gives the name where the qmaster can be acessed. But below it's trying to access under "| main|proyecto-192|C|".There are some tools in $SGE_ROOT/utilbin/lx24-amd64: $ ./gethostname -all and then: $ ./gethostbyname <name> $ ./gethostbyaddr <addr> by these names and address. Is there any firewall installed blocking traffic the machine itself? This needs to be reolved, why it is running under eth1. There is a file to map hostnames to interfaces and make an alias to them, but I think in your case we have to look elsewhere, as you want to run it on the main interface. A plain: $ hostname gives you the name from eth0? -- Reuti > eth1 Link encap:Ethernet HWaddr 08:00:27:14:C4:0C > inet addr:192.168.56.101 Bcast:192.168.56.255 Mask:255.255.255.0 > inet6 addr: fe80::a00:27ff:fe14:c40c/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:1805 errors:0 dropped:0 overruns:0 frame:0 > TX packets:1152 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:162007 (158.2 KiB) TX bytes:186807 (182.4 KiB) > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:92 errors:0 dropped:0 overruns:0 frame:0 > TX packets:92 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:4600 (4.4 KiB) TX bytes:4600 (4.4 KiB) > > > 2011/7/7 Reuti <[email protected]> > Am 07.07.2011 um 19:27 schrieb Carlos Scaloni: > > > Hi, thanks for answering! > > > > I have a file in /tmp called sge_messages with this content: > > > > 07/07/2011 18:59:41| main|proyecto-192|C|abort qmaster startup due to > > communication errors > > Well, you listed the complete /etc/hosts - i.e. no 127.0.0.2 is present (i.e. > no entry for it is good)? > > What is the primary interface in the master node? As I see two entries I > assume you have at least two network interfaces, and one of them is connected > to the outside world, the other to the nodes. Maybe it's addressing the > cluster on the wrong one. > > -- Reuti > > > > 2011/7/7 Reuti <[email protected]> > > Hi, > > > > Am 07.07.2011 um 19:11 schrieb Carlos Scaloni: > > > > > Hi friends! I can't install SGE, I need your help, please. Thanks a lot > > > in advance! > > > > > > Options I chose: > > > > > > admin user is sgeadmin > > > set network ports with environment > > > sge_qmaster port 6444 > > > sge_execd port 6445 > > > say no to pkgadd and verify permissions > > > classic spooling, not berkeley db > > > gid range 20000-21000 > > > enter list of execution hosts node01 thru node## > > > > did you get any error log in /tmp? > > > > -- Reuti > > > > > > > Error: > > > > > > Grid Engine qmaster startup > > > --------------------------- > > > > > > Starting qmaster daemon. Please wait ... > > > starting sge_qmaster > > > > > > sge_qmaster start problem > > > > > > sge_qmaster didn't start! > > > sge_qmaster start problem > > > > > > cat /etc/hosts > > > > > > 127.0.0.1 localhost localhost.localdomain localhost4 > > > localhost4.localdomain4 > > > ::1 localhost > > > 192.168.56.101 proyecto-192.local > > > 10.0.2.15 proyecto-10.local > > > > > > > > > _______________________________________________ > > > users mailing list > > > [email protected] > > > https://gridengine.org/mailman/listinfo/users > > > > > > > > _______________________________________________ > > users mailing list > > [email protected] > > https://gridengine.org/mailman/listinfo/users > > _______________________________________________ users mailing list [email protected] https://gridengine.org/mailman/listinfo/users
