Hi again,
back to the drawing board and this trouble telia router,
It seems that the telia router (connecting to ext network) does not serv my
server with an IP address
the setup in the router wants me to fill in the ipv4 address that it should
have DHCP served my server with.....
when Im in the WAN advanced menu Im trying to fill in the UPnP variant for
port forwarding (whatever UPnP stands
for and what it does in this context....), but guess that im not to fill in
for DynDNS.
( the record for forwarding though has the ETHERNET address !! which I think
should suffice more than enough but not)
so still stuck, but possibly on a higher "understanding" level
----- Original Message -----
From: "Freek de Kruijf" <[email protected]>
To: <[email protected]>
Sent: Wednesday, October 31, 2018 2:37 PM
Subject: Re: [users@httpd] invisible server
Op woensdag 31 oktober 2018 12:48:42 CET schreef [email protected]:
Hi again, didnt work to turn DHCP off, just rendered the PC/server
without
IP address (ie not even the local net)
Right.
looking at WAN services, I get the following fields to fill (for "+ Add
new
IPv4 port mapping" ):
IPv4 Port forwarding table
Name Protocol WAN port LAN port Destination IP Destination
MAC
so the "Destination" in this, would that actually be the PC/server IP
(which
I then guess I have to set manually in the PC )
Your PC/Server normally gets the same IP address from DHCP when it
restarts,
so you can use that address as Destination.
For a web server you need to forward the external port 80 to the internal
port
80 of your PC/Server. In case you use https you also need to forward 433
to
433.
--
fr.gr.
Freek de Kruijf
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
