Brain, that makes perfect sense to me, thanks. The only problem is, is
that the internal machines still cannot get out. They get global ips
that are being advertised by my router (radvd), and they can ping6 back
to my inside router interface, but not the outside interface of the router.
Brian Zill wrote:
Yes, you can't use 6to4 with private addresses (at least to talk to the
rest of the Internet). 6to4 won't work to a router behind a NAT. For
the particular case of Windows XP, the IPv6 stack won't even attempt to
create a 6to4 address from a private address.
You shouldn't need to tunnel inside your own network if it's just a
single subnet. You should be able to run IPv6 natively. To do this,
set up your gateway router (the machine with your end of the tunnel to
your IPv6 ISP) to advertise a subnet of the prefix you get from your
IPv6 ISP on your internal network, and to route IPv6 packets back and
forth between your subnet and the tunnel. Any client boxes on your
subnet should automatically configure addresses based on router
advertisements they receive from your gateway router.
--Brian
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Michael Banta
Sent: Thursday, 17 March, 2005 09:49
To: [email protected]
Subject: 2002 addresses
Ok, things are starting to make a little more sense, thank you all.
I was ready to assign an IP of 2002: to a windows xp client
when I realized that this machine is behind a firewall and
has a nat'ed address of 10.0.10.x. I would not think that
would be allowed.
Is this a correct assumption?
Thanks
Mike
---------------------------------------------------------------------
The IPv6 Users Mailing List
Unsubscribe by sending "unsubscribe users" to [EMAIL PROTECTED]
---------------------------------------------------------------------
The IPv6 Users Mailing List
Unsubscribe by sending "unsubscribe users" to [EMAIL PROTECTED]
---------------------------------------------------------------------
The IPv6 Users Mailing List
Unsubscribe by sending "unsubscribe users" to [EMAIL PROTECTED]
