Hello,
I have a 2.6.5 Linux running router radvd.
I also have 2.6.5 clients(and a 2.4.20 client) that accept the router
advertisements from the router and acquire a Link-Global address and also
autoconfigures their Link-Local address.
Their configs:
ipv6.conf.eth0.accept_ra=1
ipv6.conf.all.accept_ra=1
ipv6.conf.default.accept_ra=1I have a 2.6.11 client host that does not accept any router advertisements even though it's config is the same as above. (I have compared the "sysctl -a" output on both the 2.6.5 and 2.6.11 and they are identical). In fact the following is what occurs at boot time: 1. When I boot up this client, eth0 does not have the inet6 Link-local address. If I then issue: ifconfig eth0 down ifconfig eth0 up The inet6 Link-local address then appears. 2. My 2.6.11 host does not learn this prefix and as a result there is no Link-Global address. Has anyone experienced this issue. Thank you, Phil Bellino ============================ Phil Bellino MRV Communications, Inc. Boston Product Division 295 Foster St. Littleton,MA 01460 Tel: (978)952-4807 Email: [EMAIL PROTECTED] ============================
<<application/ms-tnef>>
