Hi all,
I've got a very stupid question. Some months ago I wrote an application
that acts as some kind of DHCP server. Now, months later, I want to run
this application on some other pc's and now for some reason it fails. I
think there's something wrong with the routing tables. Of course, Im
doubting if it ever worked.
I think it's a very simple problem but I'm looking at it for about two
hours and I can't find it.
I have two pc's atlantis1 and atlantis2
Atlantis 1 has the following IP information:
eth2: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:50:ba:a9:2a:14 brd ff:ff:ff:ff:ff:ff
inet6 fd50:ae2c:6366:1::fe/16 scope global
The IP information of Atlantis 2 is
eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:0c:46:b2:f5:2a brd ff:ff:ff:ff:ff:ff
inet6 fd50:ae2c:6366:2::fe/16 scope global
The routing table of Atlantis1 is
Destination Next
Hop Flags Metric Ref Use Iface
::1/128
:: U 0 290 2 lo
fd50::/128
:: U 0 0 0 lo
fd50:ae2c:6366:1::fd/128
:: U 0 0 0 lo
fd50:ae2c:6366:1::fe/128
:: U 0 73 1 lo
fd50:ae2c:6366:2::fe/128
:: U 1 32 0 eth2
fd50:ae2c:6366:3f::fe/128
:: U 1 32 0 eth1
fd50:ae2c:6366:3f::/64
fd50:ae2c:6366:3f::fe UG 1024 0 0 eth1
fd50::/16
:: U 1 0 0 eth3
fd50::/16
:: U 256 0 0 eth1
fd50::/16
:: U 256 0 0 eth2
fd50::/16
:: U 256 0 0 eth3
fd50::/16
fd50:ae2c:6366:2::fe UG 1024 0 0 eth2
fd50::/16
fd50:ae2c:6366:3f::fe UG 1024 0 0 eth1
fe80::250:baff:feaa:f7d5/128
:: U 0 0 0 lo
fe80::250:baff:febb:a358/128
:: U 0 4 0 lo
fe80::/64
:: U 256 0 0 eth1
fe80::/64
:: U 256 0 0 eth2
fe80::/64
:: U 256 0 0 eth3
ff00::/8
:: U 256 0 0 eth1
ff00::/8
:: U 256 0 0 eth2
ff00::/8
:: U 256 0 0 eth3
The routing table of Atlantis2 is
Destination Next
Hop Flags Metric Ref Use Iface
::1/128
:: U 0 88 0 lo
fd50::/128
:: U 0 0 0 lo
fd50:ae2c:6366:1::fe/128
:: U 1 33 0 eth1
fd50:ae2c:6366:1::/64
fd50:ae2c:6366:1::fe UG 1024 0 0 eth1
fd50:ae2c:6366:2::fd/128
:: U 0 0 0 lo
fd50:ae2c:6366:2::fe/128
:: U 0 88 0 lo
fd50:ae2c:6366:3::fe/128
:: U 1 31 0 eth2
fd50::/16
:: U 1 0 0 eth3
fd50::/16
:: U 256 0 0 eth3
fd50::/16
:: U 256 0 0 eth1
fd50::/16
:: U 256 0 0 eth2
fd50::/16
fd50:ae2c:6366:3::fe UG 1024 0 0 eth2
fd50::/16
fd50:ae2c:6366:1::fe UG 1024 0 0 eth1
fe80::/128
:: U 0 0 0 lo
fe80::20c:46ff:feb2:a0f6/128
:: U 0 8 0 lo
fe80::/64
:: U 256 0 0 eth0
fe80::/64
:: U 256 0 0 eth3
fe80::/64
:: U 256 0 0 eth1
fe80::/64
:: U 256 0 0 eth2
ff00::/8
:: U 256 0 0 eth0
ff00::/8
:: U 256 0 0 eth3
ff00::/8
:: U 256 0 0 eth1
ff00::/8
:: U 256 0 0 eth2
the interfaces are:
Atlantis 1 (eth2) <------> (eth1) Atlantis 2
If you're got this far, thanks for reading to the end! If you can help
me thanks a million!
steven
---------------------------------------------------------------------
The IPv6 Users Mailing List
Unsubscribe by sending "unsubscribe users" to [EMAIL PROTECTED]
