If that fails try to set the log level to 0. can't remember what those levels are, but zero should log *everything*
If you don't run the boxes as root, they will not have write access to the files, as the log files are read/write only for root. also - at the start of the console output, the boxes say things about the logs - this may provide clues as to why logs aren't written. > > -- > Oded Arbel > m-Wise Mobile Solutions > > [EMAIL PROTECTED] > Mobile: +972-67-340014 > Tel: +972-9-9581711 (ext: 116) > > ::.. > Top 25 Explanations by Programmers why their programs doesn't work: > 13.Oh, it's just a feature. > > > > -----Original Message----- > > From: Andrea Trasatti [mailto:[EMAIL PROTECTED]] > > Sent: Thursday, June 13, 2002 12:25 PM > > To: [EMAIL PROTECTED] > > Subject: log files > > > > > > Hello, > > I'm using kannel 1.1.6, just installed it. I took the > > chance to read again the > > manual and tried to configure it to write some logs. > > It seems like it's not writing anything, though. > > > > This is a snippet of my configuration file: > > > > group = core > > log-file = "/var/log/kannel.log" > > log-level = 5 > > > > group = wapbox > > log-file = "/var/log/wapbox.log" > > log-level = 5 > > > > > > There's more, of course and the wapgateway works just fine, I > > can browse and all. > > Even the status page is ok. > > NOW, I started everything from command line with these two commands: > > > > ./bearerbox-1.1.6 kannel.conf & > > ./wapbox-1.1.6 kannel.conf & > > > > > > I can see the logs in the stadard output, in my shell. > > The logs files exist, but: > > -rw------- 1 root 0 Jun 13 11:25 kannel.log > > -rw------- 1 root 0 Jun 13 11:25 wapbox.log > > > > They are 0 bytes. > > > > Any idea? What's wrong? > > > > Thank you, > > Andrea > > > > =================== > > Andrea Trasatti > > BWARE TECHNOLOGIES > > via San Gregorio, 3 - 20124 Milan - Italy > > http://www.bware.it > > Tel. +39 02 2779181 > > Fax +39 02 27791828 > > Cell. +39 335 7866749 > > > > > > > > > >
