--- Ilari Mikkonen <[EMAIL PROTECTED]> wrote: > > > > > > Hi > > > > I have 2 questions. > > > > 1- under mandrake, how do I connect to the > modem (on com 2) to set it up with AT commands ? > > I'm not quite sure what you mean, but if you want to > access WML pages with mobile phone, go to the > userguide and read the Appendix C. It gives you the > basics.
Just connect your modem to com2, there is no need to configure anything else then use: group=smsc smsc=at (or at2 this is what i use) modemtype=WAVECOM device=/dev/ttyS1 (for com2) > > > 2- Can someone show me a bit of his > kannel.conf regarding the settings of the modem > (speed, CNMI = 1,2,0,0,0 and others) you don't need to specify these settings for WAVECOM > > What version of kannel are you using? The latest > snapshot versions ( and maybe 1.1.6 ) support AT2 > module and "include" keyword. with this include > keyword in your configuration file you can include > file called "modems.conf". It has definitions for > many modems. Again documentation is your friend. > > > I couldn't make it (I use a wavecom) > > I think there is also stuff for wavecom. > > > 3- How do I stop kannel from automatically > send an answer when it receives an sms ? > > Assuming you mean sending SMS back to the mobile > phone. Try "max-messages" > > "The total maximum of SMSes in reply. Default is 1. > If max-messages is set to 0, no reply is sent, > except for error messages. " That is correct! > > Straight from the user's guide ;) > > ilari mikkonen > > > Nickylars __________________________________________________ Do You Yahoo!? Sign up for SBC Yahoo! Dial - First Month Free http://sbc.yahoo.com
