Re: binary structure of a Push SMS

[Enzo dell'Aquila]

Hi Ralph,     if you can't find the problem, make this: *) go in src/test/ dir of kannel *) type ./test_ppg -q http://localhost:8080/gateway-1.2.0/cgi-bin/wap_push.cgi?username=xxx&password=yyy content_file control_file     you can omit username e password if you don't put it in you kannel.conf file     look at the exact url as you put in your kannel.conf file     you find content_file and control_file in kannel_userguide.pdf  (Appendix C.)   This should work. You can check log seeking for which SMS was sent.   Bye, Enzo ----- Original Message ----- From: [EMAIL PROTECTED] To: Enzo dell'Aquila ; [EMAIL PROTECTED] Sent: Friday, August 09, 2002 4:38 PM Subject: Re: binary structure of a Push SMS Hi Enzo, it works now! I looked at the Data Coding Scheme for SMS and it seems that the M20 needs absolutely Bit 4 of the DCS set to 1 (which indicates that bit 0 and 1 have a message class meaning). So I changed the DCS value from Hex 04 to 14 (Bit  4 + Bit 2 for 8bit encoding) and it worked ;o) But now I have the problem that the SMS isn't recognized as Wap Push Initiator by the T68i, but shows as a very scrambled text. I think I can find the problem soon. Thanks for helping & greetings, Ralph