Re: [-] Wrong source address ton value in SMPP.

[Kwok Peng Tuck]

Here's my config :

group = smsc
smsc = smpp
smsc-id = Test
preferred-smsc-id = Test
#allowed-smsc-id = Test
host = $.$.$.$
port = ****
transceiver-mode = true
smsc-username = "*******"
smsc-password = *******
system-type = "VMA"
interface-version = 34
dest-addr-npi = 00000001
dest-addr-ton = 00000001
source-addr-npi = 00000000
source-addr-ton = 00000101
Of course I didn't submit '*' as password or port I just blanked them 
out for the list.
I'm pretty sure 101 is five right ?

David Tully wrote:

Could you email on the matching conf file?

----- Original Message -----
From: "Kwok Peng Tuck" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, June 07, 2003 5:36 AM
Subject: [-] Wrong source address ton value in SMPP.
 

I seem to be getting the wrong source address ton value for SMPP in
   

kannel,
 

I've set it to 00000001 but  get this instead :

2005-06-03 00:00:07 [7] DEBUG: SMPP[Test]: Manually forced source addr
ton = 65, source add npi = 0
2005-06-03 00:00:07 [7] DEBUG: SMPP[Test]: Manually forced dest addr ton
= 1, dest add npi = 1
2005-06-03 00:00:07 [7] DEBUG: SMPP[Test]: Sending PDU:
2005-06-03 00:00:07 [7] DEBUG: SMPP PDU 0x83348f0 dump:
2005-06-03 00:00:07 [7] DEBUG:   type_name: submit_sm
2005-06-03 00:00:07 [7] DEBUG:   command_id: 4 = 0x00000004
2005-06-03 00:00:07 [7] DEBUG:   command_status: 0 = 0x00000000
2005-06-03 00:00:07 [7] DEBUG:   sequence_number: 37060 = 0x000090c4
2005-06-03 00:00:07 [7] DEBUG:   service_type: NULL
2005-06-03 00:00:07 [7] DEBUG:   source_addr_ton: 65 = 0x00000041
2005-06-03 00:00:07 [7] DEBUG:   source_addr_npi: 0 = 0x00000000
which is quite a large leap from the value 1.

I'm using Kannel 1.3.1 . Any ideas anyone ?