The values should be in decimal, not binary, like this: source-addr-ton = 5 source-addr-npi = 0 dest-addr-ton = 1 dest-addr-npi = 1
..or whatever your values are.. Regards, David. ----- Original Message ----- From: "Kwok Peng Tuck" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, June 07, 2003 10:58 AM Subject: Re: [-] Wrong source address ton value in SMPP. > Here's my config : > > group = smsc > smsc = smpp > smsc-id = Test > preferred-smsc-id = Test > #allowed-smsc-id = Test > host = $.$.$.$ > port = **** > transceiver-mode = true > smsc-username = "*******" > smsc-password = ******* > system-type = "VMA" > interface-version = 34 > dest-addr-npi = 00000001 > dest-addr-ton = 00000001 > source-addr-npi = 00000000 > source-addr-ton = 00000101 > > Of course I didn't submit '*' as password or port I just blanked them > out for the list. > I'm pretty sure 101 is five right ? > > David Tully wrote: > > >Could you email on the matching conf file? > > > >----- Original Message ----- > >From: "Kwok Peng Tuck" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Saturday, June 07, 2003 5:36 AM > >Subject: [-] Wrong source address ton value in SMPP. > > > > > > > > > >>I seem to be getting the wrong source address ton value for SMPP in > >> > >> > >kannel, > > > > > >>I've set it to 00000001 but get this instead : > >> > >>2005-06-03 00:00:07 [7] DEBUG: SMPP[Test]: Manually forced source addr > >>ton = 65, source add npi = 0 > >>2005-06-03 00:00:07 [7] DEBUG: SMPP[Test]: Manually forced dest addr ton > >>= 1, dest add npi = 1 > >>2005-06-03 00:00:07 [7] DEBUG: SMPP[Test]: Sending PDU: > >>2005-06-03 00:00:07 [7] DEBUG: SMPP PDU 0x83348f0 dump: > >>2005-06-03 00:00:07 [7] DEBUG: type_name: submit_sm > >>2005-06-03 00:00:07 [7] DEBUG: command_id: 4 = 0x00000004 > >>2005-06-03 00:00:07 [7] DEBUG: command_status: 0 = 0x00000000 > >>2005-06-03 00:00:07 [7] DEBUG: sequence_number: 37060 = 0x000090c4 > >>2005-06-03 00:00:07 [7] DEBUG: service_type: NULL > >>2005-06-03 00:00:07 [7] DEBUG: source_addr_ton: 65 = 0x00000041 > >>2005-06-03 00:00:07 [7] DEBUG: source_addr_npi: 0 = 0x00000000 > >> > >>which is quite a large leap from the value 1. > >> > >>I'm using Kannel 1.3.1 . Any ideas anyone ? > >> > >> > >> > >> > >> > >> > > > > > > > > > > > > >
