I got doubt. When I have such GMS modem configuration group = smsc smsc = at2 modemtype = auto device = /dev/ttyS0 speed = 115200 # try to use speed from modem definition pin = #string
then starting my kannel with debug mode it shows 2004-10-21 05:57:31 [0] INFO: Kannel bearerbox II version 1.2.1 starting 2004-10-21 05:57:31 [0] INFO: Loading store file store.file 2004-10-21 05:57:31 [0] INFO: Store-file size 0, starting to unpack 2004-10-21 05:57:31 [0] INFO: Retrieved 0 messages, non-acknowledged messages: 02004-10-21 05:57:31 [7] DEBUG: sms_router: time to sleep 2004-10-21 05:57:31 [0] INFO: MAIN: Start-up done, entering mainloop 2004-10-21 05:57:31 [0] DEBUG: AT2[/dev/ttyS0]: start called 2004-10-21 05:57:31 [7] DEBUG: sms_router: list_len = 0 2004-10-21 05:57:31 [6] DEBUG: AT2[/dev/ttyS0]: detecting modem type 2004-10-21 05:57:31 [6] INFO: AT2[/dev/ttyS0]: opening device 2004-10-21 05:57:31 [6] DEBUG: AT2[/dev/ttyS0]: device opened 2004-10-21 05:57:31 [6] INFO: AT2[/dev/ttyS0]: speed set to 115200 2004-10-21 05:57:31 [6] DEBUG: AT2[/dev/ttyS0]: --> ^M 2004-10-21 05:57:33 [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2004-10-21 05:57:37 [6] DEBUG: AT2[/dev/ttyS0]: --> AT&F^M 2004-10-21 05:57:41 [6] DEBUG: Thread 6 (gw/smsc/smsc_at2.c:at2_device_thread) terminates. what this message mean, whether I can use this gms modem or not? When I use this configuration with speed autodetect option then it checks speeds lower than 57600, but when I checked with NowSMS then it shows 115200bps.
